80486DX2-66/SMART-open-study
1
0
Fork 0
mirror of https://github.com/bsdhw/SMART.git synced 2025-05-31 16:21:41 +05:30
Code Issues Activity
Files
master
SMART-open-study/HDD/Toshiba/MK8034/MK8034GSX/8599F110EF37
Andrey Ponomarenko a41331e270 Update of reports (new: 14, modified: 3797)
2023-02-14 02:15:20 +03:00

296 lines
15 KiB
Plaintext
Raw Permalink Blame History

smartctl 7.3 2022-02-28 r5338 [FreeBSD 14.0-CURRENT amd64] (local build)
Copyright (C) 2002-22, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Model Family: Toshiba 2.5" HDD MK..34GSX
Device Model: TOSHIBA MK8034GSX
Serial Number: --
Firmware Version: AH301H
User Capacity: 80,026,361,856 bytes [80.0 GB]
Sector Size: 512 bytes logical/physical
Device is: In smartctl database 7.3/5319
ATA Version is: ATA/ATAPI-7 (minor revision not indicated)
Local Time is: Sat Sep 10 11:19:28 2022 EDT
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
AAM feature is: Unavailable
APM level is: 128 (minimum power consumption without standby)
Rd look-ahead is: Enabled
Write cache is: Enabled
DSN feature is: Unavailable
ATA Security is: Disabled, frozen [SEC2]
Wt Cache Reorder: Unavailable
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x00) Offline data collection activity
was never started.
Auto Offline Data Collection: Disabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: ( 120) seconds.
Offline data collection
capabilities: (0x51) SMART execute Offline immediate.
No Auto Offline data collection support.
Suspend Offline collection upon new
command.
No Offline surface scan supported.
Self-test supported.
No Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 2) minutes.
Extended self-test routine
recommended polling time: ( 61) minutes.
SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE
1 Raw_Read_Error_Rate POSR-- 100 100 050 - 0
2 Throughput_Performance POS--- 100 100 050 - 0
3 Spin_Up_Time PO---- 100 100 002 - 1662
4 Start_Stop_Count -O--CK 100 100 000 - 22136
5 Reallocated_Sector_Ct PO--CK 100 100 050 - 2
7 Seek_Error_Rate POSR-- 100 100 050 - 0
8 Seek_Time_Performance P-S--- 100 100 050 - 0
9 Power_On_Hours -O--CK 072 072 000 - 11224
10 Spin_Retry_Count PO--C- 253 100 030 - 0
12 Power_Cycle_Count -O--CK 100 100 000 - 7641
191 G-Sense_Error_Rate -O--CK 100 100 000 - 3833
192 Power-Off_Retract_Count -O--CK 098 098 000 - 1196
193 Load_Cycle_Count -O--CK 045 045 000 - 553797
194 Temperature_Celsius -O---K 100 100 000 - 23 (Min/Max 5/60)
196 Reallocated_Event_Count -O--CK 100 100 000 - 2
197 Current_Pending_Sector -O--C- 100 100 000 - 0
198 Offline_Uncorrectable ----C- 100 100 000 - 0
199 UDMA_CRC_Error_Count -OSRCK 200 253 000 - 111
220 Disk_Shift -O---- 100 100 000 - 102
222 Loaded_Hours -O--CK 080 080 000 - 8054
223 Load_Retry_Count -O--CK 100 100 000 - 0
224 Load_Friction -O---K 100 100 000 - 0
226 Load-in_Time -OS--K 100 100 000 - 320
240 Head_Flying_Hours P----- 100 100 001 - 0
||||||_ K auto-keep
|||||__ C event count
||||___ R error rate
|||____ S speed/performance
||_____ O updated online
|______ P prefailure warning
General Purpose Log Directory Version 1
SMART Log Directory Version 1 [multi-sector log support]
Address Access R/W Size Description
0x00 GPL,SL R/O 1 Log Directory
0x01 SL R/O 1 Summary SMART error log
0x02 SL R/O 51 Comprehensive SMART error log
0x03 GPL R/O 64 Ext. Comprehensive SMART error log
0x06 SL R/O 1 SMART self-test log
0x07 GPL R/O 1 Extended self-test log
0x09 SL R/W 1 Selective self-test log
0x11 GPL R/O 1 SATA Phy Event Counters log
0x80-0x9f GPL,SL R/W 16 Host vendor specific log
SMART Extended Comprehensive Error Log Version: 1 (64 sectors)
Device Error Count: 119
CR = Command Register
FEATR = Features Register
COUNT = Count (was: Sector Count) Register
LBA_48 = Upper bytes of LBA High/Mid/Low Registers ] ATA-8
LH = LBA High (was: Cylinder High) Register ] LBA
LM = LBA Mid (was: Cylinder Low) Register ] Register
LL = LBA Low (was: Sector Number) Register ]
DV = Device (was: Device/Head) Register
DC = Device Control Register
ER = Error register
ST = Status register
Powered_Up_Time is measured from power on, and printed as
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
SS=sec, and sss=millisec. It "wraps" after 49.710 days.
Error 119 [118] occurred at disk power-on lifetime: 8948 hours (372 days + 20 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
84 -- 51 00 01 00 00 00 00 97 69 e0 00 Error: ICRC, ABRT 1 sectors at LBA = 0x00009769 = 38761
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
35 00 00 00 40 00 00 00 00 97 2a e0 00 00:00:23.721 WRITE DMA EXT
35 00 00 00 40 00 00 00 00 a3 ea e0 00 00:00:23.720 WRITE DMA EXT
ef 00 03 01 45 00 00 01 00 00 00 a0 00 00:00:23.719 SET FEATURES [Set transfer mode]
ff ff ff ff ff ff ff ff ff ff ff ff 0c 00:00:23.714 [VENDOR SPECIFIC]
35 00 00 00 40 00 00 00 00 97 2a e0 00 00:00:23.509 WRITE DMA EXT
Error 118 [117] occurred at disk power-on lifetime: 8948 hours (372 days + 20 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
84 -- 51 00 01 00 00 00 00 97 69 e0 00 Error: ICRC, ABRT 1 sectors at LBA = 0x00009769 = 38761
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
35 00 00 00 40 00 00 00 00 97 2a e0 00 00:00:23.509 WRITE DMA EXT
ef 00 03 01 45 00 00 01 00 00 00 a0 00 00:00:23.508 SET FEATURES [Set transfer mode]
ff ff ff ff ff ff ff ff ff ff ff ff 0c 00:00:23.503 [VENDOR SPECIFIC]
35 00 00 00 40 00 00 00 00 a3 ea e0 00 00:00:23.248 WRITE DMA EXT
35 00 00 00 10 00 00 00 00 97 aa e0 00 00:00:23.247 WRITE DMA EXT
Error 117 [116] occurred at disk power-on lifetime: 8948 hours (372 days + 20 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
84 -- 51 00 01 00 00 00 00 a4 29 e0 00 Error: ICRC, ABRT 1 sectors at LBA = 0x0000a429 = 42025
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
35 00 00 00 40 00 00 00 00 a3 ea e0 00 00:00:23.248 WRITE DMA EXT
35 00 00 00 10 00 00 00 00 97 aa e0 00 00:00:23.247 WRITE DMA EXT
35 00 00 00 08 00 00 00 00 b0 6a e0 00 00:00:23.247 WRITE DMA EXT
35 00 00 00 01 00 00 00 00 00 03 e0 00 00:00:23.247 WRITE DMA EXT
35 00 00 00 40 00 00 00 00 97 2a e0 00 00:00:18.010 WRITE DMA EXT
Error 116 [115] occurred at disk power-on lifetime: 8948 hours (372 days + 20 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
84 -- 51 00 01 00 00 00 00 b6 e9 e0 00 Error: ICRC, ABRT 1 sectors at LBA = 0x0000b6e9 = 46825
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
35 00 00 01 00 00 00 00 00 b5 ea e0 00 00:00:17.542 WRITE DMA EXT
35 00 00 00 08 00 00 00 00 4a a6 e0 00 00:00:17.542 WRITE DMA EXT
ef 00 03 01 45 00 00 01 00 00 00 a0 00 00:00:17.542 SET FEATURES [Set transfer mode]
ff ff ff ff ff ff ff ff ff ff ff ff 0c 00:00:17.536 [VENDOR SPECIFIC]
35 00 00 01 00 00 00 00 00 b5 ea e0 00 00:00:17.320 WRITE DMA EXT
Error 115 [114] occurred at disk power-on lifetime: 8948 hours (372 days + 20 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
84 -- 51 00 01 00 00 00 00 b6 e9 e0 00 Error: ICRC, ABRT 1 sectors at LBA = 0x0000b6e9 = 46825
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
35 00 00 01 00 00 00 00 00 b5 ea e0 00 00:00:17.320 WRITE DMA EXT
35 00 00 00 08 00 00 00 00 00 22 e0 00 00:00:17.320 WRITE DMA EXT
ef 00 03 01 45 00 00 01 00 00 00 a0 00 00:00:17.319 SET FEATURES [Set transfer mode]
ff ff ff ff ff ff ff ff ff ff ff ff 0c 00:00:17.314 [VENDOR SPECIFIC]
35 00 00 01 00 00 00 00 00 b5 ea e0 00 00:00:17.096 WRITE DMA EXT
Error 114 [113] occurred at disk power-on lifetime: 8948 hours (372 days + 20 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
84 -- 51 00 01 00 00 00 00 b6 e9 e0 00 Error: ICRC, ABRT 1 sectors at LBA = 0x0000b6e9 = 46825
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
35 00 00 01 00 00 00 00 00 b5 ea e0 00 00:00:17.096 WRITE DMA EXT
35 00 00 00 80 00 00 00 00 b4 aa e0 00 00:00:17.094 WRITE DMA EXT
35 00 00 00 80 00 00 00 00 b5 2a e0 00 00:00:17.092 WRITE DMA EXT
25 00 00 00 08 00 00 00 00 9c aa e0 00 00:00:17.090 READ DMA EXT
25 00 00 00 08 00 00 00 00 9c 2a e0 00 00:00:17.081 READ DMA EXT
Error 113 [112] occurred at disk power-on lifetime: 8948 hours (372 days + 20 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
84 -- 51 00 01 00 00 00 00 97 69 e0 00 Error: ICRC, ABRT 1 sectors at LBA = 0x00009769 = 38761
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
35 00 00 00 40 00 00 00 00 97 2a e0 00 00:00:16.839 WRITE DMA EXT
35 00 00 00 40 00 00 00 00 97 2a e0 00 00:00:16.787 WRITE DMA EXT
35 00 00 00 08 00 00 00 00 97 ea e0 00 00:00:16.787 WRITE DMA EXT
ef 00 03 01 45 00 00 01 00 00 00 a0 00 00:00:16.786 SET FEATURES [Set transfer mode]
ff ff ff ff ff ff ff ff ff ff ff ff 0c 00:00:16.781 [VENDOR SPECIFIC]
Error 112 [111] occurred at disk power-on lifetime: 8948 hours (372 days + 20 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
84 -- 51 00 01 00 00 00 00 97 69 e0 00 Error: ICRC, ABRT 1 sectors at LBA = 0x00009769 = 38761
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
35 00 00 00 40 00 00 00 00 97 2a e0 00 00:00:16.582 WRITE DMA EXT
35 00 00 00 08 00 00 00 00 9e aa e0 00 00:00:16.531 WRITE DMA EXT
35 00 00 00 40 00 00 00 00 97 2a e0 00 00:00:16.382 WRITE DMA EXT
35 00 00 00 08 00 00 00 00 4a a6 e0 00 00:00:16.382 WRITE DMA EXT
35 00 00 00 08 00 00 00 00 00 22 e0 00 00:00:16.381 WRITE DMA EXT
SMART Extended Self-test Log Version: 1 (1 sectors)
No self-tests have been logged. [To run self-tests, use: smartctl -t]
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
SCT Commands not supported
Device Statistics (GP/SMART Log 0x04) not supported
Pending Defects log (GP Log 0x0c) not supported
SATA Phy Event Counters (GP Log 0x11)
ID Size Value Description
0x0001 4 0 Command failed due to ICRC error
0x0002 4 0 R_ERR response for data FIS
0x0003 4 0 R_ERR response for device-to-host data FIS
0x0004 4 0 R_ERR response for host-to-device data FIS
0x0005 4 0 R_ERR response for non-data FIS
0x0006 4 0 R_ERR response for device-to-host non-data FIS
0x0007 4 0 R_ERR response for host-to-device non-data FIS
0x0008 4 0 Device-to-host non-data FIS retries
0x0009 4 0 Transition from drive PhyRdy to drive PhyNRdy
0x000a 4 4 Device-to-host register FISes sent due to a COMRESET
0x000b 4 0 CRC errors within host-to-device FIS
0x000d 4 0 Non-CRC errors within host-to-device FIS
0x000f 4 0 R_ERR response for host-to-device data FIS, CRC
0x0010 4 0 R_ERR response for host-to-device data FIS, non-CRC
0x0012 4 0 R_ERR response for host-to-device non-data FIS, CRC
0x0013 4 0 R_ERR response for host-to-device non-data FIS, non-CRC
View Git Blame Copy Permalink