mirror of
https://github.com/bsdhw/SMART.git
synced 2025-05-31 16:21:41 +05:30
119 lines
6.2 KiB
Plaintext
119 lines
6.2 KiB
Plaintext
smartctl 7.2 2020-12-30 r5155 [OpenBSD 7.0 amd64] (local build)
|
|
Copyright (C) 2002-20, Bruce Allen, Christian Franke, www.smartmontools.org
|
|
|
|
=== START OF INFORMATION SECTION ===
|
|
Model Family: Western Digital Caviar Green
|
|
Device Model: WDC WD10EADS-00M2B0
|
|
Serial Number: --
|
|
LU WWN Device Id: 5 0014ee ...
|
|
Firmware Version: 01.00A01
|
|
User Capacity: 1,000,204,886,016 bytes [1.00 TB]
|
|
Sector Size: 512 bytes logical/physical
|
|
Device is: In smartctl database [for details use: -P show]
|
|
ATA Version is: ATA8-ACS (minor revision not indicated)
|
|
SATA Version is: SATA 2.6, 3.0 Gb/s
|
|
Local Time is: Tue Oct 12 22:53:42 2021 PDT
|
|
SMART support is: Available - device has SMART capability.
|
|
SMART support is: Enabled
|
|
|
|
=== START OF READ SMART DATA SECTION ===
|
|
SMART Status not supported: Incomplete response, ATA output registers missing
|
|
SMART overall-health self-assessment test result: PASSED
|
|
Warning: This result is based on an Attribute check.
|
|
|
|
General SMART Values:
|
|
Offline data collection status: (0x84) Offline data collection activity
|
|
was suspended by an interrupting command from host.
|
|
Auto Offline Data Collection: Enabled.
|
|
Self-test execution status: ( 0) The previous self-test routine completed
|
|
without error or no self-test has ever
|
|
been run.
|
|
Total time to complete Offline
|
|
data collection: (20400) seconds.
|
|
Offline data collection
|
|
capabilities: (0x7b) SMART execute Offline immediate.
|
|
Auto Offline data collection on/off support.
|
|
Suspend Offline collection upon new
|
|
command.
|
|
Offline surface scan supported.
|
|
Self-test supported.
|
|
Conveyance Self-test supported.
|
|
Selective Self-test supported.
|
|
SMART capabilities: (0x0003) Saves SMART data before entering
|
|
power-saving mode.
|
|
Supports SMART auto save timer.
|
|
Error logging capability: (0x01) Error logging supported.
|
|
General Purpose Logging supported.
|
|
Short self-test routine
|
|
recommended polling time: ( 2) minutes.
|
|
Extended self-test routine
|
|
recommended polling time: ( 235) minutes.
|
|
Conveyance self-test routine
|
|
recommended polling time: ( 5) minutes.
|
|
SCT capabilities: (0x303f) SCT Status supported.
|
|
SCT Error Recovery Control supported.
|
|
SCT Feature Control supported.
|
|
SCT Data Table supported.
|
|
|
|
SMART Attributes Data Structure revision number: 16
|
|
Vendor Specific SMART Attributes with Thresholds:
|
|
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
|
|
1 Raw_Read_Error_Rate 0x002f 181 181 051 Pre-fail Always - 1286125
|
|
3 Spin_Up_Time 0x0027 112 109 021 Pre-fail Always - 7391
|
|
4 Start_Stop_Count 0x0032 096 096 000 Old_age Always - 4113
|
|
5 Reallocated_Sector_Ct 0x0033 180 180 140 Pre-fail Always - 158
|
|
7 Seek_Error_Rate 0x002e 200 200 000 Old_age Always - 0
|
|
9 Power_On_Hours 0x0032 073 073 000 Old_age Always - 20384
|
|
10 Spin_Retry_Count 0x0032 100 100 000 Old_age Always - 0
|
|
11 Calibration_Retry_Count 0x0032 100 100 000 Old_age Always - 0
|
|
12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 482
|
|
192 Power-Off_Retract_Count 0x0032 200 200 000 Old_age Always - 287
|
|
193 Load_Cycle_Count 0x0032 032 032 000 Old_age Always - 504883
|
|
194 Temperature_Celsius 0x0022 111 088 000 Old_age Always - 36
|
|
196 Reallocated_Event_Count 0x0032 043 043 000 Old_age Always - 157
|
|
197 Current_Pending_Sector 0x0032 193 192 000 Old_age Always - 1300
|
|
198 Offline_Uncorrectable 0x0030 199 197 000 Old_age Offline - 233
|
|
199 UDMA_CRC_Error_Count 0x0032 200 200 000 Old_age Always - 0
|
|
200 Multi_Zone_Error_Rate 0x0008 158 012 000 Old_age Offline - 8404
|
|
|
|
SMART Error Log Version: 1
|
|
No Errors Logged
|
|
|
|
SMART Self-test log structure revision number 1
|
|
Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
|
|
# 1 Short offline Completed without error 00% 16909 -
|
|
# 2 Short offline Completed without error 00% 16885 -
|
|
# 3 Short offline Completed without error 00% 16862 -
|
|
# 4 Short offline Completed without error 00% 16838 -
|
|
# 5 Short offline Completed without error 00% 16815 -
|
|
# 6 Short offline Completed without error 00% 16791 -
|
|
# 7 Short offline Completed without error 00% 16768 -
|
|
# 8 Short offline Completed without error 00% 16744 -
|
|
# 9 Short offline Completed without error 00% 16720 -
|
|
#10 Short offline Completed without error 00% 16697 -
|
|
#11 Short offline Completed without error 00% 16673 -
|
|
#12 Short offline Completed without error 00% 16650 -
|
|
#13 Short offline Completed without error 00% 16626 -
|
|
#14 Short offline Completed without error 00% 16603 -
|
|
#15 Short offline Completed without error 00% 16580 -
|
|
#16 Short offline Completed without error 00% 16557 -
|
|
#17 Short offline Completed without error 00% 16533 -
|
|
#18 Short offline Completed without error 00% 16509 -
|
|
#19 Short offline Completed without error 00% 16486 -
|
|
#20 Short offline Completed without error 00% 16462 -
|
|
#21 Short offline Completed without error 00% 16439 -
|
|
|
|
SMART Selective self-test log data structure revision number 1
|
|
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
|
|
1 0 0 Not_testing
|
|
2 0 0 Not_testing
|
|
3 0 0 Not_testing
|
|
4 0 0 Not_testing
|
|
5 0 0 Not_testing
|
|
Selective self-test flags (0x0):
|
|
After scanning selected spans, do NOT read-scan remainder of disk.
|
|
If Selective self-test is pending on power-up, resume after 0 minute delay.
|
|
|
|
|
|
|