80486DX2-66/SMART-open-study
1
0
Fork 0
mirror of https://github.com/bsdhw/SMART.git synced 2025-05-31 16:21:41 +05:30
Code Issues Activity
Files
master
SMART-open-study/HDD/WDC/WD10/WD10JPVX-60JC3T0/F709B2EEAE8C
Andrey Ponomarenko b1c41e7edc Update of reports (new: 3637, modified: 0)
2022-03-18 23:39:11 +03:00

329 lines
16 KiB
Plaintext
Raw Permalink Blame History

smartctl 7.2 2020-12-30 r5155 [FreeBSD 13.0-RELEASE amd64] (local build)
Copyright (C) 2002-20, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Model Family: Western Digital Blue Mobile
Device Model: WDC WD10JPVX-60JC3T0
Serial Number: --
LU WWN Device Id: 5 0014ee ...
Firmware Version: 01.01A01
User Capacity: 1,000,204,886,016 bytes [1.00 TB]
Sector Sizes: 512 bytes logical, 4096 bytes physical
Rotation Rate: 5400 rpm
Form Factor: 2.5 inches
Device is: In smartctl database [for details use: -P show]
ATA Version is: ACS-2 (minor revision not indicated)
SATA Version is: SATA 3.0, 6.0 Gb/s (current: 6.0 Gb/s)
Local Time is: Fri Feb 11 16:46:44 2022 PST
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
AAM feature is: Unavailable
APM level is: 128 (minimum power consumption without standby)
Rd look-ahead is: Enabled
Write cache is: Enabled
DSN feature is: Unavailable
ATA Security is: Disabled, NOT FROZEN [SEC1]
Wt Cache Reorder: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x00) Offline data collection activity
was never started.
Auto Offline Data Collection: Disabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: (18000) seconds.
Offline data collection
capabilities: (0x51) SMART execute Offline immediate.
No Auto Offline data collection support.
Suspend Offline collection upon new
command.
No Offline surface scan supported.
Self-test supported.
No Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 2) minutes.
Extended self-test routine
recommended polling time: ( 202) minutes.
SCT capabilities: (0x703d) SCT Status supported.
SCT Error Recovery Control supported.
SCT Feature Control supported.
SCT Data Table supported.
SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE
1 Raw_Read_Error_Rate POSR-K 200 200 051 - 0
3 Spin_Up_Time POS--K 184 179 021 - 1783
4 Start_Stop_Count -O--CK 097 097 000 - 3475
5 Reallocated_Sector_Ct PO--CK 200 200 140 - 0
7 Seek_Error_Rate POSR-K 200 200 051 - 0
9 Power_On_Hours -O--CK 089 089 000 - 8079
10 Spin_Retry_Count PO--CK 100 100 051 - 0
11 Calibration_Retry_Count -O--CK 100 100 000 - 0
12 Power_Cycle_Count -O--CK 097 097 000 - 3367
183 Runtime_Bad_Block -O--CK 100 100 000 - 0
184 End-to-End_Error PO--CK 100 100 097 - 0
187 Reported_Uncorrect -O--CK 100 087 000 - 13
188 Command_Timeout -O--CK 100 098 000 - 8590065670
190 Airflow_Temperature_Cel -O---K 071 052 040 - 29 (Min/Max 26/29)
191 G-Sense_Error_Rate -O--CK 065 065 000 - 35
192 Power-Off_Retract_Count -O--CK 200 200 000 - 33
193 Load_Cycle_Count -O--CK 096 096 000 - 312883
194 Temperature_Celsius -O---K 118 099 000 - 29
196 Reallocated_Event_Count -O--CK 200 200 000 - 0
197 Current_Pending_Sector -O--CK 200 200 000 - 0
198 Offline_Uncorrectable ----CK 100 253 000 - 0
199 UDMA_CRC_Error_Count -O--CK 200 200 000 - 0
200 Multi_Zone_Error_Rate P--R-- 100 253 051 - 0
||||||_ K auto-keep
|||||__ C event count
||||___ R error rate
|||____ S speed/performance
||_____ O updated online
|______ P prefailure warning
General Purpose Log Directory Version 1
SMART Log Directory Version 1 [multi-sector log support]
Address Access R/W Size Description
0x00 GPL,SL R/O 1 Log Directory
0x01 SL R/O 1 Summary SMART error log
0x02 SL R/O 5 Comprehensive SMART error log
0x03 GPL R/O 6 Ext. Comprehensive SMART error log
0x06 SL R/O 1 SMART self-test log
0x07 GPL R/O 1 Extended self-test log
0x09 SL R/W 1 Selective self-test log
0x10 GPL R/O 1 NCQ Command Error log
0x11 GPL R/O 1 SATA Phy Event Counters log
0x80-0x9f GPL,SL R/W 16 Host vendor specific log
0xa0-0xa7 GPL,SL VS 16 Device vendor specific log
0xa8-0xb6 GPL,SL VS 1 Device vendor specific log
0xb7 GPL,SL VS 38 Device vendor specific log
0xbd GPL,SL VS 1 Device vendor specific log
0xc0 GPL,SL VS 1 Device vendor specific log
0xc1 GPL VS 93 Device vendor specific log
0xe0 GPL,SL R/W 1 SCT Command/Status
0xe1 GPL,SL R/W 1 SCT Data Transfer
SMART Extended Comprehensive Error Log Version: 1 (6 sectors)
Device Error Count: 13
CR = Command Register
FEATR = Features Register
COUNT = Count (was: Sector Count) Register
LBA_48 = Upper bytes of LBA High/Mid/Low Registers ] ATA-8
LH = LBA High (was: Cylinder High) Register ] LBA
LM = LBA Mid (was: Cylinder Low) Register ] Register
LL = LBA Low (was: Sector Number) Register ]
DV = Device (was: Device/Head) Register
DC = Device Control Register
ER = Error register
ST = Status register
Powered_Up_Time is measured from power on, and printed as
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
SS=sec, and sss=millisec. It "wraps" after 49.710 days.
Error 13 [12] occurred at disk power-on lifetime: 4458 hours (185 days + 18 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
10 -- 51 00 00 00 00 00 7a 16 40 00 00 Error: IDNF at LBA = 0x007a1640 = 8001088
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
61 00 30 00 08 00 00 00 7a 16 40 40 00 00:54:26.409 WRITE FPDMA QUEUED
2f 00 00 00 01 00 00 00 00 00 10 40 00 00:54:24.986 READ LOG EXT
61 00 10 00 08 00 00 04 26 e8 28 40 00 00:54:16.492 WRITE FPDMA QUEUED
2f 00 00 00 01 00 00 00 00 00 10 40 00 00:53:55.910 READ LOG EXT
61 00 10 00 08 00 00 04 26 e8 28 40 00 00:53:47.415 WRITE FPDMA QUEUED
Error 12 [11] occurred at disk power-on lifetime: 4458 hours (185 days + 18 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
10 -- 51 00 00 00 00 04 26 e8 28 00 00 Error: IDNF at LBA = 0x0426e828 = 69658664
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
61 00 10 00 08 00 00 04 26 e8 28 40 00 00:54:16.492 WRITE FPDMA QUEUED
2f 00 00 00 01 00 00 00 00 00 10 40 00 00:53:55.910 READ LOG EXT
61 00 10 00 08 00 00 04 26 e8 28 40 00 00:53:47.415 WRITE FPDMA QUEUED
2f 00 00 00 01 00 00 00 00 00 10 40 00 00:53:45.248 READ LOG EXT
61 00 10 00 08 00 00 04 26 e8 28 40 00 00:53:36.754 WRITE FPDMA QUEUED
Error 11 [10] occurred at disk power-on lifetime: 4458 hours (185 days + 18 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
10 -- 51 00 00 00 00 04 26 e8 28 00 00 Error: IDNF at LBA = 0x0426e828 = 69658664
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
61 00 10 00 08 00 00 04 26 e8 28 40 00 00:53:47.415 WRITE FPDMA QUEUED
2f 00 00 00 01 00 00 00 00 00 10 40 00 00:53:45.248 READ LOG EXT
61 00 10 00 08 00 00 04 26 e8 28 40 00 00:53:36.754 WRITE FPDMA QUEUED
2f 00 00 00 01 00 00 00 00 00 10 40 00 00:53:26.641 READ LOG EXT
61 00 30 00 18 00 00 00 7a 16 40 40 00 00:53:17.725 WRITE FPDMA QUEUED
Error 10 [9] occurred at disk power-on lifetime: 4458 hours (185 days + 18 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
10 -- 51 00 00 00 00 04 26 e8 28 00 00 Error: IDNF at LBA = 0x0426e828 = 69658664
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
61 00 10 00 08 00 00 04 26 e8 28 40 00 00:53:36.754 WRITE FPDMA QUEUED
2f 00 00 00 01 00 00 00 00 00 10 40 00 00:53:26.641 READ LOG EXT
61 00 30 00 18 00 00 00 7a 16 40 40 00 00:53:17.725 WRITE FPDMA QUEUED
61 00 20 00 10 00 00 00 69 29 a8 40 00 00:53:17.725 WRITE FPDMA QUEUED
61 00 10 00 08 00 00 04 26 e8 28 40 00 00:53:17.725 WRITE FPDMA QUEUED
Error 9 [8] occurred at disk power-on lifetime: 4458 hours (185 days + 18 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
10 -- 51 00 00 00 00 04 26 e8 28 40 00 Error: IDNF at LBA = 0x0426e828 = 69658664
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
61 00 30 00 18 00 00 00 7a 16 40 40 00 00:53:17.725 WRITE FPDMA QUEUED
61 00 20 00 10 00 00 00 69 29 a8 40 00 00:53:17.725 WRITE FPDMA QUEUED
61 00 10 00 08 00 00 04 26 e8 28 40 00 00:53:17.725 WRITE FPDMA QUEUED
2f 00 00 00 01 00 00 00 00 00 10 40 00 00:53:17.725 READ LOG EXT
61 00 20 00 10 00 00 00 69 29 a8 40 00 00:53:09.684 WRITE FPDMA QUEUED
Error 8 [7] occurred at disk power-on lifetime: 4458 hours (185 days + 18 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
10 -- 51 00 00 00 00 04 26 e8 28 40 00 Error: IDNF at LBA = 0x0426e828 = 69658664
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
61 00 20 00 10 00 00 00 69 29 a8 40 00 00:53:09.684 WRITE FPDMA QUEUED
61 00 10 00 08 00 00 04 26 e8 28 40 00 00:53:09.230 WRITE FPDMA QUEUED
2f 00 00 00 01 00 00 00 00 00 10 40 00 00:53:06.408 READ LOG EXT
61 00 30 00 20 00 00 00 7a 16 40 40 00 00:52:55.651 WRITE FPDMA QUEUED
61 00 18 00 18 00 00 03 d3 3c 28 40 00 00:52:55.651 WRITE FPDMA QUEUED
Error 7 [6] occurred at disk power-on lifetime: 4458 hours (185 days + 18 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
10 -- 51 00 00 00 00 04 26 e8 28 40 00 Error: IDNF at LBA = 0x0426e828 = 69658664
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
61 00 30 00 20 00 00 00 7a 16 40 40 00 00:52:55.651 WRITE FPDMA QUEUED
61 00 18 00 18 00 00 03 d3 3c 28 40 00 00:52:55.651 WRITE FPDMA QUEUED
61 00 20 00 10 00 00 00 69 29 a8 40 00 00:52:55.651 WRITE FPDMA QUEUED
61 00 10 00 08 00 00 04 26 e8 28 40 00 00:52:55.651 WRITE FPDMA QUEUED
2f 00 00 00 01 00 00 00 00 00 10 40 00 00:52:55.651 READ LOG EXT
Error 6 [5] occurred at disk power-on lifetime: 4458 hours (185 days + 18 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
10 -- 51 00 00 00 00 03 d3 3c 28 40 00 Error: IDNF at LBA = 0x03d33c28 = 64175144
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
61 00 30 00 20 00 00 00 7a 16 40 40 00 00:52:51.650 WRITE FPDMA QUEUED
61 00 18 00 18 00 00 03 d3 3c 28 40 00 00:52:47.156 WRITE FPDMA QUEUED
61 00 20 00 10 00 00 00 69 29 a8 40 00 00:52:47.156 WRITE FPDMA QUEUED
61 00 10 00 08 00 00 04 26 e8 28 40 00 00:52:47.156 WRITE FPDMA QUEUED
2f 00 00 00 01 00 00 00 00 00 10 40 00 00:52:47.156 READ LOG EXT
SMART Extended Self-test Log Version: 1 (1 sectors)
Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
# 1 Short offline Completed without error 00% 0 -
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
SCT Status Version: 3
SCT Version (vendor specific): 258 (0x0102)
Device State: Active (0)
Current Temperature: 29 Celsius
Power Cycle Min/Max Temperature: 26/29 Celsius
Lifetime Min/Max Temperature: 9/48 Celsius
Under/Over Temperature Limit Count: 0/0
Vendor specific:
01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
SCT Temperature History Version: 2
Temperature Sampling Period: 1 minute
Temperature Logging Interval: 1 minute
Min/Max recommended Temperature: 0/60 Celsius
Min/Max Temperature Limit: -41/85 Celsius
Temperature History Size (Index): 128 (114)
SCT Error Recovery Control:
Read: 85 (8.5 seconds)
Write: 85 (8.5 seconds)
Device Statistics (GP/SMART Log 0x04) not supported
Pending Defects log (GP Log 0x0c) not supported
SATA Phy Event Counters (GP Log 0x11)
ID Size Value Description
0x0001 2 0 Command failed due to ICRC error
0x0002 2 0 R_ERR response for data FIS
0x0003 2 0 R_ERR response for device-to-host data FIS
0x0004 2 0 R_ERR response for host-to-device data FIS
0x0005 2 0 R_ERR response for non-data FIS
0x0006 2 0 R_ERR response for device-to-host non-data FIS
0x0007 2 0 R_ERR response for host-to-device non-data FIS
0x0008 2 0 Device-to-host non-data FIS retries
0x0009 2 5 Transition from drive PhyRdy to drive PhyNRdy
0x000a 2 5 Device-to-host register FISes sent due to a COMRESET
0x000b 2 0 CRC errors within host-to-device FIS
0x000f 2 0 R_ERR response for host-to-device data FIS, CRC
0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC
0x8000 4 697 Vendor specific
View Git Blame Copy Permalink