80486DX2-66/SMART-open-study
1
0
Fork 0
mirror of https://github.com/bsdhw/SMART.git synced 2025-05-31 16:21:41 +05:30
Code Issues Activity
Files
master
SMART-open-study/HDD/WDC/WD1000/WD1000FYPS-01ZKB0/2D032C0EDEEE
Andrey Ponomarenko 06d1e49c98 Update of reports (new: 3633, modified: 0)
2023-02-14 01:25:13 +03:00

320 lines
16 KiB
Plaintext
Raw Permalink Blame History

smartctl 7.3 2022-02-28 r5338 [FreeBSD 13.0-RELEASE-p12 amd64] (local build)
Copyright (C) 2002-22, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Model Family: Western Digital RE2-GP
Device Model: WDC WD1000FYPS-01ZKB0
Serial Number: --
LU WWN Device Id: 5 0014ee ...
Firmware Version: 02.01B01
User Capacity: 1,000,204,886,016 bytes [1.00 TB]
Sector Size: 512 bytes logical/physical
Rotation Rate: 5400 rpm
Device is: In smartctl database 7.2/5254
ATA Version is: ATA8-ACS (minor revision not indicated)
SATA Version is: SATA 2.5, 3.0 Gb/s
Local Time is: Sun Aug 14 12:34:31 2022 MSK
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
AAM level is: 128 (quiet), recommended: 128
APM feature is: Unavailable
Rd look-ahead is: Enabled
Write cache is: Enabled
DSN feature is: Unavailable
ATA Security is: Disabled, NOT FROZEN [SEC1]
Wt Cache Reorder: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x84) Offline data collection activity
was suspended by an interrupting command from host.
Auto Offline Data Collection: Enabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: (26400) seconds.
Offline data collection
capabilities: (0x7b) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 2) minutes.
Extended self-test routine
recommended polling time: ( 302) minutes.
Conveyance self-test routine
recommended polling time: ( 5) minutes.
SCT capabilities: (0x303f) SCT Status supported.
SCT Error Recovery Control supported.
SCT Feature Control supported.
SCT Data Table supported.
SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE
1 Raw_Read_Error_Rate POSR-- 200 200 051 - 113
3 Spin_Up_Time PO---- 193 169 021 - 7333
4 Start_Stop_Count -O--CK 099 099 000 - 1468
5 Reallocated_Sector_Ct PO--CK 200 200 140 - 0
7 Seek_Error_Rate -OSR-- 200 200 000 - 0
9 Power_On_Hours -O--CK 025 025 000 - 55354
10 Spin_Retry_Count -O--C- 100 100 000 - 0
11 Calibration_Retry_Count -O--C- 100 100 000 - 0
12 Power_Cycle_Count -O--CK 100 100 000 - 869
192 Power-Off_Retract_Count -O--CK 200 200 000 - 361
193 Load_Cycle_Count -O--CK 009 009 000 - 575902
194 Temperature_Celsius -O---K 113 101 000 - 39
196 Reallocated_Event_Count -O--CK 200 200 000 - 0
197 Current_Pending_Sector -O--C- 200 200 000 - 0
198 Offline_Uncorrectable ----C- 200 200 000 - 0
199 UDMA_CRC_Error_Count -OSRCK 200 200 000 - 904
200 Multi_Zone_Error_Rate ---R-- 200 200 000 - 0
||||||_ K auto-keep
|||||__ C event count
||||___ R error rate
|||____ S speed/performance
||_____ O updated online
|______ P prefailure warning
General Purpose Log Directory Version 1
SMART Log Directory Version 1 [multi-sector log support]
Address Access R/W Size Description
0x00 GPL,SL R/O 1 Log Directory
0x01 SL R/O 1 Summary SMART error log
0x02 SL R/O 5 Comprehensive SMART error log
0x03 GPL R/O 6 Ext. Comprehensive SMART error log
0x06 SL R/O 1 SMART self-test log
0x07 GPL R/O 1 Extended self-test log
0x09 SL R/W 1 Selective self-test log
0x10 GPL R/O 1 NCQ Command Error log
0x11 GPL R/O 1 SATA Phy Event Counters log
0x80-0x9f GPL,SL R/W 16 Host vendor specific log
0xa0-0xa7 GPL,SL VS 16 Device vendor specific log
0xa8-0xb7 GPL,SL VS 1 Device vendor specific log
0xc0 GPL,SL VS 1 Device vendor specific log
0xc1 GPL VS 24 Device vendor specific log
0xe0 GPL,SL R/W 1 SCT Command/Status
0xe1 GPL,SL R/W 1 SCT Data Transfer
SMART Extended Comprehensive Error Log Version: 1 (6 sectors)
Device Error Count: 387 (device log contains only the most recent 24 errors)
CR = Command Register
FEATR = Features Register
COUNT = Count (was: Sector Count) Register
LBA_48 = Upper bytes of LBA High/Mid/Low Registers ] ATA-8
LH = LBA High (was: Cylinder High) Register ] LBA
LM = LBA Mid (was: Cylinder Low) Register ] Register
LL = LBA Low (was: Sector Number) Register ]
DV = Device (was: Device/Head) Register
DC = Device Control Register
ER = Error register
ST = Status register
Powered_Up_Time is measured from power on, and printed as
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
SS=sec, and sss=millisec. It "wraps" after 49.710 days.
Error 387 [2] occurred at disk power-on lifetime: 0 hours (0 days + 0 hours)
When the command that caused the error occurred, the device was in an unknown state.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
40 -- 00 01 00 00 51 00 00 40 01 00 00
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
00 aa 60 f2 a1 00 00 00 00 00 29 00 71 00:00:00.000 NOP [Reserved subcommand] [OBS-ACS-2]
08 a8 01 00 ff f2 aa 02 a1 60 00 29 08 00:00:44.464 DEVICE RESET
00 1f 60 f2 92 00 01 08 10 00 29 00 71 8d+03:29:26.953 NOP [Reserved subcommand] [OBS-ACS-2]
08 90 01 00 ff f2 1f 02 92 60 00 29 08 00:00:44.440 DEVICE RESET
Error 386 [1] occurred at disk power-on lifetime: 0 hours (0 days + 0 hours)
When the command that caused the error occurred, the device was in an unknown state.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
40 -- 00 01 00 00 51 00 00 40 01 00 00
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
00 1f 60 f2 92 00 00 00 00 00 29 00 71 00:00:00.000 NOP [Reserved subcommand] [OBS-ACS-2]
08 90 01 00 ff f2 1f 02 92 60 00 29 08 00:00:44.440 DEVICE RESET
00 94 61 f2 82 00 01 08 10 00 29 00 72 8d+03:29:22.974 NOP [Reserved subcommand] [OBS-ACS-2]
08 78 01 00 ad f2 94 71 82 60 00 29 08 00:00:58.240 DEVICE RESET
Error 385 [0] occurred at disk power-on lifetime: 0 hours (0 days + 0 hours)
When the command that caused the error occurred, the device was in an unknown state.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
40 -- 00 01 00 00 51 00 00 40 01 00 00
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
00 94 61 f2 82 00 00 00 00 00 29 00 72 00:00:00.000 NOP [Reserved subcommand] [OBS-ACS-2]
08 78 01 00 ad f2 94 71 82 60 00 29 08 00:00:58.240 DEVICE RESET
02 7d 2f f2 82 00 70 08 ff 01 29 00 00 8d+03:29:18.974 [RESERVED]
08 58 01 00 ad f2 6e 71 72 60 00 29 08 00:00:04.097 DEVICE RESET
Error 384 [23] occurred at disk power-on lifetime: 0 hours (0 days + 0 hours)
When the command that caused the error occurred, the device was in an unknown state.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
40 -- 00 01 00 00 51 00 00 40 01 00 00
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
00 6e 60 f2 72 00 00 00 00 00 29 00 71 00:00:00.000 NOP [Reserved subcommand] [OBS-ACS-2]
08 50 01 00 ff f2 6e 02 72 60 00 29 08 00:00:44.376 DEVICE RESET
00 be 60 f2 62 00 01 08 10 00 29 00 02 8d+03:29:14.861 NOP [Reserved subcommand] [OBS-ACS-2]
08 30 01 00 ea f2 bd 71 62 60 00 29 08 00:01:05.336 DEVICE RESET
Error 383 [22] occurred at disk power-on lifetime: 0 hours (0 days + 0 hours)
When the command that caused the error occurred, the device was in an unknown state.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
40 -- 00 01 05 00 51 00 00 40 01 00 00
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
00 be 60 f2 62 00 00 00 00 00 29 00 02 00:00:00.000 NOP [Reserved subcommand] [OBS-ACS-2]
08 30 01 00 ea f2 bd 71 62 60 00 29 08 00:01:05.336 DEVICE RESET
71 3a 60 f2 61 00 28 08 ea 01 29 00 71 8d+03:29:10.838 SEEK [RET-4]
08 00 00 00 00 f2 70 00 0f ea 00 29 08 00:00:44.320 DEVICE RESET
Error 382 [21] occurred at disk power-on lifetime: 0 hours (0 days + 0 hours)
When the command that caused the error occurred, the device was in an unknown state.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
40 -- 00 01 80 00 51 00 00 e0 01 00 00
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
00 7e 25 d3 d5 00 00 00 00 00 85 00 02 00:00:00.000 NOP [Reserved subcommand] [OBS-ACS-2]
00 80 00 00 60 d3 7e 02 d5 25 00 85 00 00:00:57.472 NOP [Abort queued commands]
02 7b 25 d3 d5 00 80 00 e0 00 85 00 02 25d+23:40:52.476 [RESERVED]
00 80 00 00 e0 d3 7a 02 d5 25 00 85 00 00:00:24.704 NOP [Abort queued commands]
Error 381 [20] occurred at disk power-on lifetime: 0 hours (0 days + 0 hours)
When the command that caused the error occurred, the device was in an unknown state.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
40 -- 00 01 3f 00 51 00 00 e0 01 00 00
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
00 ea 25 c9 28 00 00 00 00 00 83 00 02 00:00:00.000 NOP [Reserved subcommand] [OBS-ACS-2]
00 3f 00 00 c1 c9 66 02 19 25 00 83 00 00:00:49.471 NOP [Abort queued commands]
00 76 25 c9 0a 00 00 00 00 00 83 00 02 25d+14:09:54.533 NOP [Reserved subcommand] [OBS-ACS-2]
00 00 00 00 00 c9 75 00 0a ec 00 83 00 00:00:49.471 NOP [Abort queued commands]
Error 380 [19] occurred at disk power-on lifetime: 0 hours (0 days + 0 hours)
When the command that caused the error occurred, the device was in an unknown state.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
40 -- 00 01 3f 00 51 00 00 e0 01 00 00
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
00 66 25 c9 19 00 00 00 00 00 83 00 02 00:00:00.000 NOP [Reserved subcommand] [OBS-ACS-2]
00 00 00 00 00 c9 65 00 19 ec 00 83 00 00:00:49.471 NOP [Abort queued commands]
02 75 ec c9 0a 00 3f 00 c1 00 83 00 00 25d+14:09:50.710 [RESERVED]
00 3f 00 00 c1 c8 00 02 fb 25 00 83 00 00:00:00.000 NOP [Abort queued commands]
SMART Extended Self-test Log Version: 1 (1 sectors)
Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
# 1 Extended offline Completed without error 00% 49294 -
# 2 Extended offline Interrupted (host reset) 90% 49287 -
# 3 Short offline Completed without error 00% 49287 -
# 4 Extended offline Interrupted (host reset) 70% 48210 -
# 5 Extended offline Completed without error 00% 47355 -
# 6 Extended offline Interrupted (host reset) 10% 47314 -
# 7 Extended offline Completed: read failure 90% 47120 38757375
# 8 Extended offline Completed: read failure 90% 44510 38757375
# 9 Short offline Completed without error 00% 39296 -
#10 Short offline Completed without error 00% 39286 -
#11 Short offline Completed without error 00% 39209 -
#12 Short offline Completed without error 00% 38441 -
2 of 2 failed self-tests are outdated by newer successful extended offline self-test # 1
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
SCT Status Version: 2
SCT Version (vendor specific): 258 (0x0102)
Device State: SMART Off-line Data Collection executing in background (4)
Current Temperature: 39 Celsius
Power Cycle Min/Max Temperature: 26/47 Celsius
Lifetime Min/Max Temperature: 38/51 Celsius
Under/Over Temperature Limit Count: 0/0
SCT Temperature History Version: 2
Temperature Sampling Period: 1 minute
Temperature Logging Interval: 1 minute
Min/Max recommended Temperature: 0/60 Celsius
Min/Max Temperature Limit: -40/85 Celsius
Temperature History Size (Index): 128 (75)
SCT Error Recovery Control:
Read: 70 (7.0 seconds)
Write: 70 (7.0 seconds)
Device Statistics (GP/SMART Log 0x04) not supported
Pending Defects log (GP Log 0x0c) not supported
SATA Phy Event Counters (GP Log 0x11)
ID Size Value Description
0x0001 2 1 Command failed due to ICRC error
0x0002 2 896 R_ERR response for data FIS
0x0003 2 15 R_ERR response for device-to-host data FIS
0x0004 2 881 R_ERR response for host-to-device data FIS
0x0005 2 93 R_ERR response for non-data FIS
0x0006 2 0 R_ERR response for device-to-host non-data FIS
0x0007 2 93 R_ERR response for host-to-device non-data FIS
0x000a 2 1726 Device-to-host register FISes sent due to a COMRESET
0x8000 4 3670016 Vendor specific
View Git Blame Copy Permalink