80486DX2-66/SMART-open-study
1
0
Fork 0
mirror of https://github.com/bsdhw/SMART.git synced 2025-05-31 16:21:41 +05:30
Code Issues Activity
Files
master
SMART-open-study/HDD/WDC/WD2000/WD2000FYYZ-01UL1B2/23E6E937355B
Andrey Ponomarenko f78ebcf301 Update of reports (new: 4, modified: 1172)
2025-01-05 03:17:30 +03:00

294 lines
15 KiB
Plaintext
Raw Permalink Blame History

smartctl 7.4 2023-08-01 r5530 [FreeBSD 14.1-RELEASE-p3 amd64] (local build)
Copyright (C) 2002-23, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Model Family: Western Digital Re
Device Model: WDC WD2000FYYZ-01UL1B2
Serial Number: --
LU WWN Device Id: 5 0014ee ...
Firmware Version: 01.01K03
User Capacity: 2,000,398,934,016 bytes [2.00 TB]
Sector Size: 512 bytes logical/physical
Rotation Rate: 7200 rpm
Device is: In smartctl database 7.3/5577
ATA Version is: ATA8-ACS (minor revision not indicated)
SATA Version is: SATA 3.0, 6.0 Gb/s (current: 6.0 Gb/s)
Local Time is: Sun Aug 25 12:19:13 2024 UTC
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
AAM feature is: Unavailable
APM level is: 128 (minimum power consumption without standby)
Rd look-ahead is: Enabled
Write cache is: Enabled
DSN feature is: Unavailable
ATA Security is: Disabled, frozen [SEC2]
Wt Cache Reorder: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x84) Offline data collection activity
was suspended by an interrupting command from host.
Auto Offline Data Collection: Enabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: (24960) seconds.
Offline data collection
capabilities: (0x7b) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 2) minutes.
Extended self-test routine
recommended polling time: ( 272) minutes.
Conveyance self-test routine
recommended polling time: ( 5) minutes.
SCT capabilities: (0x70bd) SCT Status supported.
SCT Error Recovery Control supported.
SCT Feature Control supported.
SCT Data Table supported.
SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE
1 Raw_Read_Error_Rate POSR-K 200 200 051 - 0
3 Spin_Up_Time POS--K 176 174 021 - 6191
4 Start_Stop_Count -O--CK 100 100 000 - 32
5 Reallocated_Sector_Ct PO--CK 200 200 140 - 0
7 Seek_Error_Rate -OSR-K 200 200 000 - 0
9 Power_On_Hours -O--CK 001 001 000 - 81817
10 Spin_Retry_Count -O--CK 100 253 000 - 0
11 Calibration_Retry_Count -O--CK 100 253 000 - 0
12 Power_Cycle_Count -O--CK 100 100 000 - 23
183 Runtime_Bad_Block -O--CK 100 100 000 - 0
192 Power-Off_Retract_Count -O--CK 200 200 000 - 5
193 Load_Cycle_Count -O--CK 200 200 000 - 26
194 Temperature_Celsius -O---K 120 114 000 - 30
196 Reallocated_Event_Count -O--CK 200 200 000 - 0
197 Current_Pending_Sector -O--CK 200 200 000 - 0
198 Offline_Uncorrectable ----CK 200 200 000 - 0
199 UDMA_CRC_Error_Count -O--CK 200 200 000 - 0
200 Multi_Zone_Error_Rate ---R-- 200 200 000 - 0
||||||_ K auto-keep
|||||__ C event count
||||___ R error rate
|||____ S speed/performance
||_____ O updated online
|______ P prefailure warning
General Purpose Log Directory Version 1
SMART Log Directory Version 1 [multi-sector log support]
Address Access R/W Size Description
0x00 GPL,SL R/O 1 Log Directory
0x01 SL R/O 1 Summary SMART error log
0x02 SL R/O 5 Comprehensive SMART error log
0x03 GPL R/O 6 Ext. Comprehensive SMART error log
0x06 SL R/O 1 SMART self-test log
0x07 GPL R/O 1 Extended self-test log
0x08 GPL R/O 2 Power Conditions log
0x09 SL R/W 1 Selective self-test log
0x10 GPL R/O 1 NCQ Command Error log
0x11 GPL R/O 1 SATA Phy Event Counters log
0x24 GPL R/O 1 Current Device Internal Status Data log
0x80-0x9f GPL,SL R/W 16 Host vendor specific log
0xa0-0xa7 GPL,SL VS 16 Device vendor specific log
0xa8-0xb7 GPL,SL VS 1 Device vendor specific log
0xbd GPL,SL VS 1 Device vendor specific log
0xc0 GPL,SL VS 1 Device vendor specific log
0xc1 GPL VS 24 Device vendor specific log
0xe0 GPL,SL R/W 1 SCT Command/Status
0xe1 GPL,SL R/W 1 SCT Data Transfer
SMART Extended Comprehensive Error Log Version: 1 (6 sectors)
Device Error Count: 5
CR = Command Register
FEATR = Features Register
COUNT = Count (was: Sector Count) Register
LBA_48 = Upper bytes of LBA High/Mid/Low Registers ] ATA-8
LH = LBA High (was: Cylinder High) Register ] LBA
LM = LBA Mid (was: Cylinder Low) Register ] Register
LL = LBA Low (was: Sector Number) Register ]
DV = Device (was: Device/Head) Register
DC = Device Control Register
ER = Error register
ST = Status register
Powered_Up_Time is measured from power on, and printed as
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
SS=sec, and sss=millisec. It "wraps" after 49.710 days.
Error 5 [4] occurred at disk power-on lifetime: 25422 hours (1059 days + 6 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
40 -- 51 00 00 00 00 00 0f 1b c7 40 00 Error: UNC at LBA = 0x000f1bc7 = 990151
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
60 00 80 00 50 00 00 00 0f 1b 80 40 08 36d+03:02:05.716 READ FPDMA QUEUED
61 00 08 00 48 00 00 33 e0 8e 18 40 08 36d+03:02:04.390 WRITE FPDMA QUEUED
61 00 10 00 40 00 00 1f e7 b5 68 40 08 36d+03:02:04.390 WRITE FPDMA QUEUED
61 00 10 00 38 00 00 81 5a 91 d0 40 08 36d+03:02:04.390 WRITE FPDMA QUEUED
61 00 20 00 30 00 00 2a ed 07 c8 40 08 36d+03:02:03.391 WRITE FPDMA QUEUED
Error 4 [3] occurred at disk power-on lifetime: 25422 hours (1059 days + 6 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
40 -- 51 00 03 00 00 00 0f 07 84 40 00 Error: WP at LBA = 0x000f0784 = 984964
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
61 00 08 00 a0 00 00 33 e0 8e 18 40 08 36d+03:01:59.961 WRITE FPDMA QUEUED
61 00 10 00 98 00 00 81 5a 91 b8 40 08 36d+03:01:59.961 WRITE FPDMA QUEUED
60 04 00 00 90 00 00 00 0f 06 00 40 08 36d+03:01:59.961 READ FPDMA QUEUED
60 09 80 00 88 00 00 00 0e fc 80 40 08 36d+03:01:59.961 READ FPDMA QUEUED
ea 00 00 00 00 00 00 00 00 00 00 e0 08 36d+03:01:59.949 FLUSH CACHE EXT
Error 3 [2] occurred at disk power-on lifetime: 23217 hours (967 days + 9 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
40 -- 51 00 03 00 00 00 0f 30 99 40 00 Error: UNC at LBA = 0x000f3099 = 995481
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
60 05 80 00 30 00 00 00 0f 3a 00 40 08 35d+16:28:55.814 READ FPDMA QUEUED
60 05 00 00 28 00 00 00 0f 35 00 40 08 35d+16:28:55.807 READ FPDMA QUEUED
60 05 00 00 20 00 00 00 0f 30 00 40 08 35d+16:28:55.807 READ FPDMA QUEUED
60 00 80 00 18 00 00 00 0f 2f 80 40 08 35d+16:28:55.755 READ FPDMA QUEUED
60 05 00 00 10 00 00 00 0f 2a 80 40 08 35d+16:28:55.574 READ FPDMA QUEUED
Error 2 [1] occurred at disk power-on lifetime: 17416 hours (725 days + 16 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
40 -- 51 00 00 00 00 00 0f 44 dc 40 00 Error: UNC at LBA = 0x000f44dc = 1000668
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
60 00 80 00 38 00 00 00 0f 44 80 40 08 29d+17:46:22.120 READ FPDMA QUEUED
61 00 08 00 30 00 00 d5 b3 b1 40 40 08 29d+17:46:21.426 WRITE FPDMA QUEUED
60 00 80 00 28 00 00 00 0f 44 00 40 08 29d+17:46:20.532 READ FPDMA QUEUED
60 00 80 00 20 00 00 00 0f 43 80 40 08 29d+17:46:20.532 READ FPDMA QUEUED
60 00 80 00 18 00 00 00 0f 43 00 40 08 29d+17:46:20.532 READ FPDMA QUEUED
Error 1 [0] occurred at disk power-on lifetime: 15209 hours (633 days + 17 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
40 -- 51 00 00 00 00 00 0f 1b c7 40 00 Error: UNC at LBA = 0x000f1bc7 = 990151
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
60 03 80 00 18 00 00 00 0f 26 00 40 08 37d+05:00:47.648 READ FPDMA QUEUED
60 04 00 00 10 00 00 00 0f 22 00 40 08 37d+05:00:47.648 READ FPDMA QUEUED
60 04 00 00 08 00 00 00 0f 1e 00 40 08 37d+05:00:47.648 READ FPDMA QUEUED
60 04 00 00 00 00 00 00 0f 1a 00 40 08 37d+05:00:47.648 READ FPDMA QUEUED
ea 00 00 00 00 00 00 00 00 00 00 e0 08 37d+05:00:47.276 FLUSH CACHE EXT
SMART Extended Self-test Log Version: 1 (1 sectors)
Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
# 1 Extended offline Completed without error 00% 65059 -
# 2 Extended offline Completed without error 00% 54721 -
# 3 Short offline Completed without error 00% 54716 -
# 4 Extended offline Completed without error 00% 49078 -
# 5 Extended offline Completed without error 00% 49057 -
# 6 Extended offline Completed without error 00% 47375 -
# 7 Extended offline Completed without error 00% 45760 -
# 8 Short offline Completed without error 00% 45755 -
# 9 Extended offline Completed without error 00% 45605 -
#10 Extended offline Completed without error 00% 45588 -
#11 Extended offline Completed without error 00% 45356 -
#12 Extended offline Completed without error 00% 45339 -
#13 Extended offline Completed without error 00% 44470 -
#14 Extended offline Completed without error 00% 44454 -
#15 Extended offline Completed without error 00% 31972 -
#16 Extended offline Completed without error 00% 31956 -
#17 Extended offline Completed without error 00% 31823 -
#18 Extended offline Completed without error 00% 31806 -
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
SCT Status Version: 3
SCT Version (vendor specific): 258 (0x0102)
Device State: Active (0)
Current Temperature: 30 Celsius
Power Cycle Min/Max Temperature: 24/36 Celsius
Lifetime Min/Max Temperature: 15/36 Celsius
Under/Over Temperature Limit Count: 0/0
Vendor specific:
01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
SCT Temperature History Version: 2
Temperature Sampling Period: 1 minute
Temperature Logging Interval: 1 minute
Min/Max recommended Temperature: 0/60 Celsius
Min/Max Temperature Limit: -41/85 Celsius
Temperature History Size (Index): 478 (126)
SCT Error Recovery Control:
Read: 70 (7.0 seconds)
Write: 70 (7.0 seconds)
Device Statistics (GP/SMART Log 0x04) not supported
Pending Defects log (GP Log 0x0c) not supported
SATA Phy Event Counters (GP Log 0x11)
ID Size Value Description
0x0001 2 0 Command failed due to ICRC error
0x0002 2 0 R_ERR response for data FIS
0x0003 2 0 R_ERR response for device-to-host data FIS
0x0004 2 0 R_ERR response for host-to-device data FIS
0x0005 2 0 R_ERR response for non-data FIS
0x0006 2 0 R_ERR response for device-to-host non-data FIS
0x0007 2 0 R_ERR response for host-to-device non-data FIS
0x0008 2 0 Device-to-host non-data FIS retries
0x0009 2 108 Transition from drive PhyRdy to drive PhyNRdy
0x000a 2 108 Device-to-host register FISes sent due to a COMRESET
0x000b 2 0 CRC errors within host-to-device FIS
0x000f 2 0 R_ERR response for host-to-device data FIS, CRC
0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC
0x8000 4 15032192 Vendor specific
View Git Blame Copy Permalink