80486DX2-66/SMART-open-study
1
0
Fork 0
mirror of https://github.com/bsdhw/SMART.git synced 2025-05-31 16:21:41 +05:30
Code Issues Activity
Files
master
SMART-open-study/HDD/WDC/WD2000/WD2000FYYZ-01UL1B2/430491C737C3
Andrey Ponomarenko f78ebcf301 Update of reports (new: 4, modified: 1172)
2025-01-05 03:17:30 +03:00

345 lines
18 KiB
Plaintext
Raw Permalink Blame History

smartctl 7.4 2023-08-01 r5530 [FreeBSD 14.1-RELEASE-p3 amd64] (local build)
Copyright (C) 2002-23, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Model Family: Western Digital Re
Device Model: WDC WD2000FYYZ-01UL1B2
Serial Number: --
LU WWN Device Id: 5 0014ee ...
Firmware Version: 01.01K03
User Capacity: 2,000,398,934,016 bytes [2.00 TB]
Sector Size: 512 bytes logical/physical
Rotation Rate: 7200 rpm
Device is: In smartctl database 7.3/5577
ATA Version is: ATA8-ACS (minor revision not indicated)
SATA Version is: SATA 3.0, 6.0 Gb/s (current: 6.0 Gb/s)
Local Time is: Sun Aug 25 12:19:13 2024 UTC
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
AAM feature is: Unavailable
APM level is: 128 (minimum power consumption without standby)
Rd look-ahead is: Enabled
Write cache is: Enabled
DSN feature is: Unavailable
ATA Security is: Disabled, frozen [SEC2]
Wt Cache Reorder: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x84) Offline data collection activity
was suspended by an interrupting command from host.
Auto Offline Data Collection: Enabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: (25440) seconds.
Offline data collection
capabilities: (0x7b) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 2) minutes.
Extended self-test routine
recommended polling time: ( 277) minutes.
Conveyance self-test routine
recommended polling time: ( 5) minutes.
SCT capabilities: (0x70bd) SCT Status supported.
SCT Error Recovery Control supported.
SCT Feature Control supported.
SCT Data Table supported.
SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE
1 Raw_Read_Error_Rate POSR-K 200 199 051 - 0
3 Spin_Up_Time POS--K 172 169 021 - 6366
4 Start_Stop_Count -O--CK 100 100 000 - 32
5 Reallocated_Sector_Ct PO--CK 200 200 140 - 0
7 Seek_Error_Rate -OSR-K 200 200 000 - 0
9 Power_On_Hours -O--CK 001 001 000 - 77045
10 Spin_Retry_Count -O--CK 100 253 000 - 0
11 Calibration_Retry_Count -O--CK 100 253 000 - 0
12 Power_Cycle_Count -O--CK 100 100 000 - 23
183 Runtime_Bad_Block -O--CK 100 100 000 - 0
192 Power-Off_Retract_Count -O--CK 200 200 000 - 5
193 Load_Cycle_Count -O--CK 200 200 000 - 26
194 Temperature_Celsius -O---K 121 114 000 - 29
196 Reallocated_Event_Count -O--CK 200 200 000 - 0
197 Current_Pending_Sector -O--CK 200 200 000 - 0
198 Offline_Uncorrectable ----CK 200 200 000 - 0
199 UDMA_CRC_Error_Count -O--CK 200 200 000 - 0
200 Multi_Zone_Error_Rate ---R-- 200 200 000 - 0
||||||_ K auto-keep
|||||__ C event count
||||___ R error rate
|||____ S speed/performance
||_____ O updated online
|______ P prefailure warning
General Purpose Log Directory Version 1
SMART Log Directory Version 1 [multi-sector log support]
Address Access R/W Size Description
0x00 GPL,SL R/O 1 Log Directory
0x01 SL R/O 1 Summary SMART error log
0x02 SL R/O 5 Comprehensive SMART error log
0x03 GPL R/O 6 Ext. Comprehensive SMART error log
0x06 SL R/O 1 SMART self-test log
0x07 GPL R/O 1 Extended self-test log
0x08 GPL R/O 2 Power Conditions log
0x09 SL R/W 1 Selective self-test log
0x10 GPL R/O 1 NCQ Command Error log
0x11 GPL R/O 1 SATA Phy Event Counters log
0x24 GPL R/O 1 Current Device Internal Status Data log
0x80-0x9f GPL,SL R/W 16 Host vendor specific log
0xa0-0xa7 GPL,SL VS 16 Device vendor specific log
0xa8-0xb7 GPL,SL VS 1 Device vendor specific log
0xbd GPL,SL VS 1 Device vendor specific log
0xc0 GPL,SL VS 1 Device vendor specific log
0xc1 GPL VS 24 Device vendor specific log
0xe0 GPL,SL R/W 1 SCT Command/Status
0xe1 GPL,SL R/W 1 SCT Data Transfer
SMART Extended Comprehensive Error Log Version: 1 (6 sectors)
Device Error Count: 45 (device log contains only the most recent 24 errors)
CR = Command Register
FEATR = Features Register
COUNT = Count (was: Sector Count) Register
LBA_48 = Upper bytes of LBA High/Mid/Low Registers ] ATA-8
LH = LBA High (was: Cylinder High) Register ] LBA
LM = LBA Mid (was: Cylinder Low) Register ] Register
LL = LBA Low (was: Sector Number) Register ]
DV = Device (was: Device/Head) Register
DC = Device Control Register
ER = Error register
ST = Status register
Powered_Up_Time is measured from power on, and printed as
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
SS=sec, and sss=millisec. It "wraps" after 49.710 days.
Error 45 [20] occurred at disk power-on lifetime: 30036 hours (1251 days + 12 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
10 -- 51 00 00 00 00 5a 18 7a 10 40 00 Error: IDNF at LBA = 0x5a187a10 = 1511553552
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
61 00 40 00 00 00 00 5a 18 7a 10 40 08 18d+16:38:20.650 WRITE FPDMA QUEUED
61 00 40 00 00 00 00 b1 c9 77 80 40 08 18d+16:38:19.521 WRITE FPDMA QUEUED
61 00 40 00 00 00 00 b1 9f e6 b0 40 08 18d+16:38:18.474 WRITE FPDMA QUEUED
61 00 28 00 00 00 00 b1 8b c4 90 40 08 18d+16:38:16.965 WRITE FPDMA QUEUED
61 00 08 00 00 00 00 b1 8b c4 70 40 08 18d+16:38:16.962 WRITE FPDMA QUEUED
Error 44 [19] occurred at disk power-on lifetime: 22113 hours (921 days + 9 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
40 -- 51 00 00 00 00 00 0f 41 71 40 00 Error: UNC at LBA = 0x000f4171 = 999793
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
60 00 80 00 e0 00 00 00 0f 49 80 40 08 47d+09:33:06.254 READ FPDMA QUEUED
60 00 80 00 d8 00 00 00 0f 49 00 40 08 47d+09:33:06.254 READ FPDMA QUEUED
60 00 80 00 d0 00 00 00 0f 48 80 40 08 47d+09:33:06.254 READ FPDMA QUEUED
60 00 80 00 c8 00 00 00 0f 48 00 40 08 47d+09:33:06.254 READ FPDMA QUEUED
60 00 80 00 c0 00 00 00 0f 47 80 40 08 47d+09:33:06.254 READ FPDMA QUEUED
Error 43 [18] occurred at disk power-on lifetime: 22113 hours (921 days + 9 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
40 -- 51 00 00 00 00 00 0f 20 52 40 00 Error: WP at LBA = 0x000f2052 = 991314
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
61 00 10 00 58 00 00 1a 22 41 80 40 08 47d+09:33:03.793 WRITE FPDMA QUEUED
60 08 80 00 50 00 00 00 0f 21 00 40 08 47d+09:33:03.793 READ FPDMA QUEUED
60 07 00 00 48 00 00 00 0f 1a 00 40 08 47d+09:33:03.793 READ FPDMA QUEUED
ea 00 00 00 00 00 00 00 00 00 00 e0 08 47d+09:33:03.775 FLUSH CACHE EXT
61 00 08 00 38 00 00 1f e6 ff e0 40 08 47d+09:33:03.775 WRITE FPDMA QUEUED
Error 42 [17] occurred at disk power-on lifetime: 21394 hours (891 days + 10 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
40 -- 51 00 00 00 00 00 0e ff cc 40 00 Error: WP at LBA = 0x000effcc = 982988
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
61 00 20 00 c8 00 00 e1 a1 1e f8 40 08 17d+10:15:11.553 WRITE FPDMA QUEUED
61 00 18 00 c0 00 00 e1 a1 1e d8 40 08 17d+10:15:11.553 WRITE FPDMA QUEUED
60 05 80 00 b8 00 00 00 0f 04 80 40 08 17d+10:15:11.552 READ FPDMA QUEUED
60 05 80 00 b0 00 00 00 0e ff 00 40 08 17d+10:15:11.552 READ FPDMA QUEUED
ea 00 00 00 00 00 00 00 00 00 00 e0 08 17d+10:15:11.541 FLUSH CACHE EXT
Error 41 [16] occurred at disk power-on lifetime: 20905 hours (871 days + 1 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
04 -- 51 00 00 00 00 00 e7 9e 28 a7 00
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
ea 00 00 00 00 00 00 00 00 00 00 e0 08 46d+18:32:06.841 FLUSH CACHE EXT
ea 00 00 00 00 00 00 00 00 00 00 e0 08 46d+18:32:06.090 FLUSH CACHE EXT
61 00 01 00 a8 00 00 00 10 10 08 40 08 46d+18:32:06.090 WRITE FPDMA QUEUED
ea 00 00 00 00 00 00 00 00 00 00 e0 08 46d+18:32:06.090 FLUSH CACHE EXT
ea 00 00 00 00 00 00 00 00 00 00 e0 08 46d+18:32:05.878 FLUSH CACHE EXT
Error 40 [15] occurred at disk power-on lifetime: 20649 hours (860 days + 9 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
40 -- 51 00 00 00 00 00 0f 15 7b 40 00 Error: UNC at LBA = 0x000f157b = 988539
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
60 05 80 00 80 00 00 00 0f 16 00 40 08 36d+03:01:38.519 READ FPDMA QUEUED
60 0a 00 00 78 00 00 00 0f 0c 00 40 08 36d+03:01:38.519 READ FPDMA QUEUED
ea 00 00 00 00 00 00 00 00 00 00 e0 08 36d+03:01:38.499 FLUSH CACHE EXT
61 00 20 00 68 00 00 2a ed 07 80 40 08 36d+03:01:38.499 WRITE FPDMA QUEUED
61 00 18 00 60 00 00 2a ed 07 60 40 08 36d+03:01:38.499 WRITE FPDMA QUEUED
Error 39 [14] occurred at disk power-on lifetime: 19930 hours (830 days + 10 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
40 -- 51 00 00 00 00 00 0f 57 20 40 00 Error: WP at LBA = 0x000f5720 = 1005344
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
61 00 18 00 58 00 00 40 38 32 20 40 08 6d+03:43:55.691 WRITE FPDMA QUEUED
61 00 08 00 50 00 00 40 38 32 10 40 08 6d+03:43:55.691 WRITE FPDMA QUEUED
61 00 18 00 48 00 00 25 44 74 50 40 08 6d+03:43:55.690 WRITE FPDMA QUEUED
61 00 08 00 40 00 00 20 b3 11 28 40 08 6d+03:43:55.690 WRITE FPDMA QUEUED
61 00 08 00 38 00 00 28 72 0b a0 40 08 6d+03:43:55.690 WRITE FPDMA QUEUED
Error 38 [13] occurred at disk power-on lifetime: 19930 hours (830 days + 10 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
40 -- 51 00 00 00 00 00 0e ea 1d 40 00 Error: WP at LBA = 0x000eea1d = 977437
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
61 00 08 00 a0 00 00 1f e4 80 d8 40 08 6d+03:43:46.810 WRITE FPDMA QUEUED
61 00 10 00 98 00 00 40 38 30 78 40 08 6d+03:43:46.810 WRITE FPDMA QUEUED
61 00 18 00 90 00 00 25 44 72 a0 40 08 6d+03:43:46.810 WRITE FPDMA QUEUED
60 05 80 00 88 00 00 00 0e f0 00 40 08 6d+03:43:46.810 READ FPDMA QUEUED
60 0a 00 00 80 00 00 00 0e e6 00 40 08 6d+03:43:46.810 READ FPDMA QUEUED
SMART Extended Self-test Log Version: 1 (1 sectors)
Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
# 1 Extended offline Completed without error 00% 60290 -
# 2 Extended offline Completed without error 00% 49949 -
# 3 Short offline Completed without error 00% 49943 -
# 4 Extended offline Completed without error 00% 44285 -
# 5 Extended offline Completed without error 00% 42603 -
# 6 Extended offline Completed without error 00% 40987 -
# 7 Short offline Completed without error 00% 40983 -
# 8 Extended offline Completed without error 00% 40832 -
# 9 Extended offline Completed without error 00% 40816 -
#10 Extended offline Completed without error 00% 40584 -
#11 Extended offline Completed without error 00% 40567 -
#12 Extended offline Completed without error 00% 39698 -
#13 Extended offline Completed without error 00% 39681 -
#14 Extended offline Completed without error 00% 27200 -
#15 Extended offline Completed without error 00% 27184 -
#16 Extended offline Completed without error 00% 27051 -
#17 Extended offline Completed without error 00% 27034 -
#18 Extended offline Completed without error 00% 27030 -
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
SCT Status Version: 3
SCT Version (vendor specific): 258 (0x0102)
Device State: Active (0)
Current Temperature: 29 Celsius
Power Cycle Min/Max Temperature: 24/35 Celsius
Lifetime Min/Max Temperature: 14/35 Celsius
Under/Over Temperature Limit Count: 0/0
Vendor specific:
01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
SCT Temperature History Version: 2
Temperature Sampling Period: 1 minute
Temperature Logging Interval: 1 minute
Min/Max recommended Temperature: 0/60 Celsius
Min/Max Temperature Limit: -41/85 Celsius
Temperature History Size (Index): 478 (95)
SCT Error Recovery Control:
Read: 70 (7.0 seconds)
Write: 70 (7.0 seconds)
Device Statistics (GP/SMART Log 0x04) not supported
Pending Defects log (GP Log 0x0c) not supported
SATA Phy Event Counters (GP Log 0x11)
ID Size Value Description
0x0001 2 0 Command failed due to ICRC error
0x0002 2 0 R_ERR response for data FIS
0x0003 2 0 R_ERR response for device-to-host data FIS
0x0004 2 0 R_ERR response for host-to-device data FIS
0x0005 2 0 R_ERR response for non-data FIS
0x0006 2 0 R_ERR response for device-to-host non-data FIS
0x0007 2 0 R_ERR response for host-to-device non-data FIS
0x0008 2 0 Device-to-host non-data FIS retries
0x0009 2 108 Transition from drive PhyRdy to drive PhyNRdy
0x000a 2 108 Device-to-host register FISes sent due to a COMRESET
0x000b 2 0 CRC errors within host-to-device FIS
0x000f 2 0 R_ERR response for host-to-device data FIS, CRC
0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC
0x8000 4 15032174 Vendor specific
View Git Blame Copy Permalink