mirror of
https://github.com/bsdhw/SMART.git
synced 2025-05-31 16:21:41 +05:30
240 lines
10 KiB
Plaintext
240 lines
10 KiB
Plaintext
smartctl 6.6 2017-11-05 r4594 [FreeBSD 11.4-RELEASE-p5 i386] (local build)
|
|
Copyright (C) 2002-17, Bruce Allen, Christian Franke, www.smartmontools.org
|
|
|
|
=== START OF INFORMATION SECTION ===
|
|
Model Family: Western Digital Caviar SE
|
|
Device Model: WDC WD2000JB-00GVC0
|
|
Serial Number: --
|
|
Firmware Version: 08.02D08
|
|
User Capacity: 200,049,647,616 bytes [200 GB]
|
|
Sector Size: 512 bytes logical/physical
|
|
Device is: In smartctl database [for details use: -P show]
|
|
ATA Version is: ATA/ATAPI-6 (minor revision not indicated)
|
|
Local Time is: Sun Dec 6 00:35:06 2020 +04
|
|
SMART support is: Available - device has SMART capability.
|
|
SMART support is: Enabled
|
|
AAM feature is: Disabled
|
|
APM feature is: Unavailable
|
|
Rd look-ahead is: Enabled
|
|
Write cache is: Enabled
|
|
DSN feature is: Unavailable
|
|
ATA Security is: Disabled, NOT FROZEN [SEC1]
|
|
Write SCT (Get) Feature Control Command failed: Read of ATA output registers not implemented [JMicron]
|
|
Wt Cache Reorder: Unknown (SCT Feature Control command failed)
|
|
|
|
=== START OF READ SMART DATA SECTION ===
|
|
SMART overall-health self-assessment test result: PASSED
|
|
|
|
General SMART Values:
|
|
Offline data collection status: (0x84) Offline data collection activity
|
|
was suspended by an interrupting command from host.
|
|
Auto Offline Data Collection: Enabled.
|
|
Self-test execution status: ( 0) The previous self-test routine completed
|
|
without error or no self-test has ever
|
|
been run.
|
|
Total time to complete Offline
|
|
data collection: ( 5778) seconds.
|
|
Offline data collection
|
|
capabilities: (0x7b) SMART execute Offline immediate.
|
|
Auto Offline data collection on/off support.
|
|
Suspend Offline collection upon new
|
|
command.
|
|
Offline surface scan supported.
|
|
Self-test supported.
|
|
Conveyance Self-test supported.
|
|
Selective Self-test supported.
|
|
SMART capabilities: (0x0003) Saves SMART data before entering
|
|
power-saving mode.
|
|
Supports SMART auto save timer.
|
|
Error logging capability: (0x01) Error logging supported.
|
|
No General Purpose Logging support.
|
|
Short self-test routine
|
|
recommended polling time: ( 2) minutes.
|
|
Extended self-test routine
|
|
recommended polling time: ( 75) minutes.
|
|
Conveyance self-test routine
|
|
recommended polling time: ( 5) minutes.
|
|
SCT capabilities: (0x003f) SCT Status supported.
|
|
SCT Error Recovery Control supported.
|
|
SCT Feature Control supported.
|
|
SCT Data Table supported.
|
|
|
|
SMART Attributes Data Structure revision number: 16
|
|
Vendor Specific SMART Attributes with Thresholds:
|
|
ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE
|
|
1 Raw_Read_Error_Rate PO-R-- 200 200 051 - 0
|
|
3 Spin_Up_Time POS--- 115 101 021 - 6791
|
|
4 Start_Stop_Count -O--CK 092 092 040 - 8715
|
|
5 Reallocated_Sector_Ct PO--CK 200 200 140 - 0
|
|
7 Seek_Error_Rate PO-R-- 200 200 051 - 0
|
|
9 Power_On_Hours -O--CK 001 001 000 - 84955
|
|
10 Spin_Retry_Count PO--C- 100 100 051 - 0
|
|
11 Calibration_Retry_Count PO--C- 100 100 051 - 0
|
|
12 Power_Cycle_Count -O--CK 096 096 000 - 4140
|
|
194 Temperature_Celsius -O---K 117 090 000 - 33
|
|
196 Reallocated_Event_Count -O--CK 200 200 000 - 0
|
|
197 Current_Pending_Sector -O--C- 200 200 000 - 0
|
|
198 Offline_Uncorrectable -O--C- 200 200 000 - 0
|
|
199 UDMA_CRC_Error_Count -O-R-- 200 253 000 - 10
|
|
200 Multi_Zone_Error_Rate P--R-- 200 200 051 - 0
|
|
||||||_ K auto-keep
|
|
|||||__ C event count
|
|
||||___ R error rate
|
|
|||____ S speed/performance
|
|
||_____ O updated online
|
|
|______ P prefailure warning
|
|
|
|
General Purpose Log Directory not supported
|
|
|
|
SMART Log Directory Version 0
|
|
Address Access R/W Size Description
|
|
0x00 SL R/O 1 Log Directory
|
|
|
|
SMART Extended Comprehensive Error Log (GP Log 0x03) not supported
|
|
|
|
SMART Error Log Version: 1
|
|
ATA Error Count: 14 (device log contains only the most recent five errors)
|
|
CR = Command Register [HEX]
|
|
FR = Features Register [HEX]
|
|
SC = Sector Count Register [HEX]
|
|
SN = Sector Number Register [HEX]
|
|
CL = Cylinder Low Register [HEX]
|
|
CH = Cylinder High Register [HEX]
|
|
DH = Device/Head Register [HEX]
|
|
DC = Device Command Register [HEX]
|
|
ER = Error register [HEX]
|
|
ST = Status register [HEX]
|
|
Powered_Up_Time is measured from power on, and printed as
|
|
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
|
|
SS=sec, and sss=millisec. It "wraps" after 49.710 days.
|
|
|
|
Error 14 occurred at disk power-on lifetime: 10847 hours (451 days + 23 hours)
|
|
When the command that caused the error occurred, the device was doing SMART Offline or Self-test.
|
|
|
|
After command completion occurred, registers were:
|
|
ER ST SC SN CL CH DH
|
|
-- -- -- -- -- -- --
|
|
40 51 20 07 73 54 e0 Error: UNC 32 sectors at LBA = 0x00547307 = 5534471
|
|
|
|
Commands leading to the command that caused the error were:
|
|
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
|
|
-- -- -- -- -- -- -- -- ---------------- --------------------
|
|
25 d5 20 ff 72 54 02 00 12:10:19.750 READ DMA EXT
|
|
25 d5 04 db 62 59 02 00 12:10:19.750 READ DMA EXT
|
|
25 d5 04 8b b2 8a 01 00 12:10:19.750 READ DMA EXT
|
|
25 d5 04 1f b4 8a 01 00 12:10:19.750 READ DMA EXT
|
|
25 d5 04 2b b2 8a 01 00 12:10:19.750 READ DMA EXT
|
|
|
|
Error 13 occurred at disk power-on lifetime: 10835 hours (451 days + 11 hours)
|
|
When the command that caused the error occurred, the device was active or idle.
|
|
|
|
After command completion occurred, registers were:
|
|
ER ST SC SN CL CH DH
|
|
-- -- -- -- -- -- --
|
|
40 51 20 07 73 54 e0 Error: UNC 32 sectors at LBA = 0x00547307 = 5534471
|
|
|
|
Commands leading to the command that caused the error were:
|
|
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
|
|
-- -- -- -- -- -- -- -- ---------------- --------------------
|
|
25 d5 20 ff 72 54 02 00 00:05:36.750 READ DMA EXT
|
|
25 d5 20 df 72 54 02 00 00:05:36.750 READ DMA EXT
|
|
25 d5 20 bf 72 54 02 00 00:05:36.750 READ DMA EXT
|
|
25 d5 20 9f 72 54 02 00 00:05:36.750 READ DMA EXT
|
|
25 d5 20 9f 9d 53 02 00 00:05:36.750 READ DMA EXT
|
|
|
|
Error 12 occurred at disk power-on lifetime: 2829 hours (117 days + 21 hours)
|
|
When the command that caused the error occurred, the device was doing SMART Offline or Self-test.
|
|
|
|
After command completion occurred, registers were:
|
|
ER ST SC SN CL CH DH
|
|
-- -- -- -- -- -- --
|
|
40 51 f0 7f 46 ab e0 Error: UNC 240 sectors at LBA = 0x00ab467f = 11224703
|
|
|
|
Commands leading to the command that caused the error were:
|
|
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
|
|
-- -- -- -- -- -- -- -- ---------------- --------------------
|
|
25 00 f0 00 46 ab 06 00 03:58:03.050 READ DMA EXT
|
|
25 00 f0 00 46 ab 06 00 03:58:03.050 READ DMA EXT
|
|
25 00 f0 00 46 ab 06 00 03:58:03.050 READ DMA EXT
|
|
25 00 f0 00 46 ab 06 00 03:58:03.050 READ DMA EXT
|
|
25 00 f0 00 46 ab 06 00 03:58:03.050 READ DMA EXT
|
|
|
|
Error 11 occurred at disk power-on lifetime: 2829 hours (117 days + 21 hours)
|
|
When the command that caused the error occurred, the device was doing SMART Offline or Self-test.
|
|
|
|
After command completion occurred, registers were:
|
|
ER ST SC SN CL CH DH
|
|
-- -- -- -- -- -- --
|
|
40 51 f0 7f 46 ab e0 Error: UNC 240 sectors at LBA = 0x00ab467f = 11224703
|
|
|
|
Commands leading to the command that caused the error were:
|
|
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
|
|
-- -- -- -- -- -- -- -- ---------------- --------------------
|
|
25 00 f0 00 46 ab 06 00 03:58:00.950 READ DMA EXT
|
|
25 00 f0 00 46 ab 06 00 03:58:00.950 READ DMA EXT
|
|
25 00 f0 00 46 ab 06 00 03:58:00.950 READ DMA EXT
|
|
25 00 f0 00 46 ab 06 00 03:58:00.950 READ DMA EXT
|
|
25 00 f0 00 46 ab 06 00 03:58:00.950 READ DMA EXT
|
|
|
|
Error 10 occurred at disk power-on lifetime: 2829 hours (117 days + 21 hours)
|
|
When the command that caused the error occurred, the device was doing SMART Offline or Self-test.
|
|
|
|
After command completion occurred, registers were:
|
|
ER ST SC SN CL CH DH
|
|
-- -- -- -- -- -- --
|
|
40 51 f0 7f 46 ab e0 Error: UNC 240 sectors at LBA = 0x00ab467f = 11224703
|
|
|
|
Commands leading to the command that caused the error were:
|
|
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
|
|
-- -- -- -- -- -- -- -- ---------------- --------------------
|
|
25 00 f0 00 46 ab 06 00 03:57:58.900 READ DMA EXT
|
|
25 00 f0 00 46 ab 06 00 03:57:58.900 READ DMA EXT
|
|
25 00 f0 00 46 ab 06 00 03:57:58.900 READ DMA EXT
|
|
25 00 f0 00 46 ab 06 00 03:57:58.900 READ DMA EXT
|
|
25 00 10 f0 46 ab 06 00 03:57:58.900 READ DMA EXT
|
|
|
|
SMART Extended Self-test Log (GP Log 0x07) not supported
|
|
|
|
SMART Self-test log structure revision number 1
|
|
Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
|
|
# 1 Conveyance offline Completed without error 00% 5688 -
|
|
# 2 Conveyance offline Completed without error 00% 2757 -
|
|
|
|
SMART Selective self-test log data structure revision number 1
|
|
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
|
|
1 0 0 Not_testing
|
|
2 0 0 Not_testing
|
|
3 0 0 Not_testing
|
|
4 0 0 Not_testing
|
|
5 0 0 Not_testing
|
|
Selective self-test flags (0x0):
|
|
After scanning selected spans, do NOT read-scan remainder of disk.
|
|
If Selective self-test is pending on power-up, resume after 0 minute delay.
|
|
|
|
SCT Status Version: 2
|
|
SCT Version (vendor specific): 258 (0x0102)
|
|
SCT Support Level: 1
|
|
Device State: SMART Off-line Data Collection executing in background (4)
|
|
Current Temperature: 33 Celsius
|
|
Power Cycle Max Temperature: 42 Celsius
|
|
Lifetime Max Temperature: 60 Celsius
|
|
|
|
SCT Temperature History Version: 2
|
|
Temperature Sampling Period: 1 minute
|
|
Temperature Logging Interval: 1 minute
|
|
Min/Max recommended Temperature: 5/55 Celsius
|
|
Min/Max Temperature Limit: 1/60 Celsius
|
|
Temperature History Size (Index): 128 (116)
|
|
|
|
Write SCT (Get) Error Recovery Control Command failed: Read of ATA output registers not implemented [JMicron]
|
|
SCT (Get) Error Recovery Control command failed
|
|
|
|
Device Statistics (GP/SMART Log 0x04) not supported
|
|
|
|
Pending Defects log (GP Log 0x0c) not supported
|
|
|
|
SATA Phy Event Counters (GP Log 0x11) not supported
|
|
|
|
|
|
|