mirror of
https://github.com/bsdhw/SMART.git
synced 2025-05-31 16:21:41 +05:30
216 lines
9.9 KiB
Plaintext
216 lines
9.9 KiB
Plaintext
smartctl 7.2 2020-12-30 r5155 [FreeBSD 13.0-STABLE amd64] (local build)
|
|
Copyright (C) 2002-20, Bruce Allen, Christian Franke, www.smartmontools.org
|
|
|
|
=== START OF INFORMATION SECTION ===
|
|
Model Family: Western Digital Caviar SE Serial ATA
|
|
Device Model: WDC WD2000JS-55MHB0
|
|
Serial Number: --
|
|
Firmware Version: 02.01C03
|
|
User Capacity: 188,376,452,096 bytes [188 GB]
|
|
Sector Size: 512 bytes logical/physical
|
|
Device is: In smartctl database [for details use: -P show]
|
|
ATA Version is: ATA/ATAPI-7 (minor revision not indicated)
|
|
Local Time is: Thu Aug 5 21:28:09 2021 MSK
|
|
SMART support is: Available - device has SMART capability.
|
|
SMART support is: Enabled
|
|
AAM level is: 254 (maximum performance), recommended: 128
|
|
APM feature is: Unavailable
|
|
Rd look-ahead is: Enabled
|
|
Write cache is: Enabled
|
|
DSN feature is: Unavailable
|
|
ATA Security is: Disabled, frozen [SEC2]
|
|
Write SCT (Get) Feature Control Command failed: Input/output error
|
|
Wt Cache Reorder: Unknown (SCT Feature Control command failed)
|
|
|
|
=== START OF READ SMART DATA SECTION ===
|
|
SMART overall-health self-assessment test result: PASSED
|
|
See vendor-specific Attribute list for marginal Attributes.
|
|
|
|
General SMART Values:
|
|
Offline data collection status: (0x84) Offline data collection activity
|
|
was suspended by an interrupting command from host.
|
|
Auto Offline Data Collection: Enabled.
|
|
Self-test execution status: ( 0) The previous self-test routine completed
|
|
without error or no self-test has ever
|
|
been run.
|
|
Total time to complete Offline
|
|
data collection: ( 6300) seconds.
|
|
Offline data collection
|
|
capabilities: (0x7b) SMART execute Offline immediate.
|
|
Auto Offline data collection on/off support.
|
|
Suspend Offline collection upon new
|
|
command.
|
|
Offline surface scan supported.
|
|
Self-test supported.
|
|
Conveyance Self-test supported.
|
|
Selective Self-test supported.
|
|
SMART capabilities: (0x0003) Saves SMART data before entering
|
|
power-saving mode.
|
|
Supports SMART auto save timer.
|
|
Error logging capability: (0x01) Error logging supported.
|
|
General Purpose Logging supported.
|
|
Short self-test routine
|
|
recommended polling time: ( 2) minutes.
|
|
Extended self-test routine
|
|
recommended polling time: ( 74) minutes.
|
|
Conveyance self-test routine
|
|
recommended polling time: ( 6) minutes.
|
|
SCT capabilities: (0x103f) SCT Status supported.
|
|
SCT Error Recovery Control supported.
|
|
SCT Feature Control supported.
|
|
SCT Data Table supported.
|
|
|
|
SMART Attributes Data Structure revision number: 16
|
|
Vendor Specific SMART Attributes with Thresholds:
|
|
ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE
|
|
1 Raw_Read_Error_Rate POSR-- 200 200 051 - 0
|
|
3 Spin_Up_Time PO---- 190 188 021 - 5466
|
|
4 Start_Stop_Count -O--CK 098 098 000 - 2797
|
|
5 Reallocated_Sector_Ct PO--CK 200 200 140 - 0
|
|
7 Seek_Error_Rate POSR-- 200 200 051 - 0
|
|
9 Power_On_Hours -O--CK 085 085 000 - 11300
|
|
10 Spin_Retry_Count PO--C- 100 100 051 - 0
|
|
11 Calibration_Retry_Count -O--C- 100 100 051 - 0
|
|
12 Power_Cycle_Count -O--CK 098 098 000 - 2790
|
|
190 Airflow_Temperature_Cel -O---K 041 020 045 NOW 59
|
|
194 Temperature_Celsius -O---K 091 070 000 - 59
|
|
196 Reallocated_Event_Count -O--CK 200 200 000 - 0
|
|
197 Current_Pending_Sector -O--C- 200 200 000 - 0
|
|
198 Offline_Uncorrectable ----C- 200 200 000 - 0
|
|
199 UDMA_CRC_Error_Count -OSRCK 200 200 000 - 2
|
|
200 Multi_Zone_Error_Rate P--R-- 200 200 051 - 0
|
|
||||||_ K auto-keep
|
|
|||||__ C event count
|
|
||||___ R error rate
|
|
|||____ S speed/performance
|
|
||_____ O updated online
|
|
|______ P prefailure warning
|
|
|
|
General Purpose Log Directory Version 1
|
|
SMART Log Directory Version 1 [multi-sector log support]
|
|
Address Access R/W Size Description
|
|
0x00 GPL,SL R/O 1 Log Directory
|
|
0x01 SL R/O 1 Summary SMART error log
|
|
0x02 SL R/O 1 Comprehensive SMART error log
|
|
0x03 GPL R/O 6 Ext. Comprehensive SMART error log
|
|
0x06 SL R/O 1 SMART self-test log
|
|
0x07 GPL R/O 1 Extended self-test log
|
|
0x09 SL R/W 1 Selective self-test log
|
|
0x11 GPL R/O 1 SATA Phy Event Counters log
|
|
0x80-0x9f GPL,SL R/W 16 Host vendor specific log
|
|
0xa0-0xa7 GPL,SL VS 16 Device vendor specific log
|
|
0xa8-0xb7 GPL,SL VS 1 Device vendor specific log
|
|
0xc0 SL VS 1 Device vendor specific log
|
|
0xe0 GPL,SL R/W 1 SCT Command/Status
|
|
0xe1 GPL,SL R/W 1 SCT Data Transfer
|
|
|
|
SMART Extended Comprehensive Error Log Version: 1 (6 sectors)
|
|
Device Error Count: 3
|
|
CR = Command Register
|
|
FEATR = Features Register
|
|
COUNT = Count (was: Sector Count) Register
|
|
LBA_48 = Upper bytes of LBA High/Mid/Low Registers ] ATA-8
|
|
LH = LBA High (was: Cylinder High) Register ] LBA
|
|
LM = LBA Mid (was: Cylinder Low) Register ] Register
|
|
LL = LBA Low (was: Sector Number) Register ]
|
|
DV = Device (was: Device/Head) Register
|
|
DC = Device Control Register
|
|
ER = Error register
|
|
ST = Status register
|
|
Powered_Up_Time is measured from power on, and printed as
|
|
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
|
|
SS=sec, and sss=millisec. It "wraps" after 49.710 days.
|
|
|
|
Error 3 [2] occurred at disk power-on lifetime: 0 hours (0 days + 0 hours)
|
|
When the command that caused the error occurred, the device was in an unknown state.
|
|
|
|
After command completion occurred, registers were:
|
|
ER -- ST COUNT LBA_48 LH LM LL DV DC
|
|
-- -- -- == -- == == == -- -- -- -- --
|
|
04 -- 00 01 01 00 53 00 00 40 01 00 00
|
|
|
|
Commands leading to the command that caused the error were:
|
|
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
|
|
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
|
|
00 b3 b0 11 09 00 00 00 00 00 00 00 00 00:00:00.000 NOP [Reserved subcommand] [OBS-ACS-2]
|
|
00 01 d0 00 00 11 b0 00 09 b0 00 00 00 00:00:00.257 NOP [Reserved subcommand] [OBS-ACS-2]
|
|
00 af b0 11 09 00 01 00 e0 d6 00 00 00 00:18:36.591 NOP [Reserved subcommand] [OBS-ACS-2]
|
|
00 01 00 00 00 11 aa 00 09 ec 00 00 00 00:00:57.345 NOP [Abort queued commands]
|
|
|
|
Error 2 [1] occurred at disk power-on lifetime: 0 hours (0 days + 0 hours)
|
|
When the command that caused the error occurred, the device was in an unknown state.
|
|
|
|
After command completion occurred, registers were:
|
|
ER -- ST COUNT LBA_48 LH LM LL DV DC
|
|
-- -- -- == -- == == == -- -- -- -- --
|
|
04 -- 00 00 0d 00 53 00 00 40 01 00 00
|
|
|
|
Commands leading to the command that caused the error were:
|
|
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
|
|
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
|
|
00 33 b0 32 71 00 00 00 00 00 00 00 00 00:00:00.000 NOP [Reserved subcommand] [OBS-ACS-2]
|
|
00 01 d5 00 e0 32 33 00 71 b0 00 00 00 00:00:57.345 NOP [Reserved subcommand] [OBS-ACS-2]
|
|
00 37 b0 32 71 00 01 00 00 00 00 00 00 00:55:05.773 NOP [Reserved subcommand] [OBS-ACS-2]
|
|
00 01 d0 00 00 32 33 00 71 b0 00 00 00 00:00:00.257 NOP [Reserved subcommand] [OBS-ACS-2]
|
|
|
|
Error 1 [0] occurred at disk power-on lifetime: 0 hours (0 days + 0 hours)
|
|
When the command that caused the error occurred, the device was in an unknown state.
|
|
|
|
After command completion occurred, registers were:
|
|
ER -- ST COUNT LBA_48 LH LM LL DV DC
|
|
-- -- -- == -- == == == -- -- -- -- --
|
|
04 -- 00 00 0d 00 53 00 00 40 01 00 00
|
|
|
|
Commands leading to the command that caused the error were:
|
|
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
|
|
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
|
|
00 1c b0 0c b6 00 00 00 00 00 00 00 00 00:00:00.000 NOP [Reserved subcommand] [OBS-ACS-2]
|
|
00 01 d5 00 e0 0c 1c 00 b6 b0 00 00 00 00:00:57.345 NOP [Reserved subcommand] [OBS-ACS-2]
|
|
00 de c8 0c b4 00 01 00 00 00 00 00 07 00:13:53.047 NOP [Reserved subcommand] [OBS-ACS-2]
|
|
00 00 00 00 f0 0c d4 07 b4 c8 00 00 00 00:01:01.440 NOP [Abort queued commands]
|
|
|
|
SMART Extended Self-test Log Version: 1 (1 sectors)
|
|
No self-tests have been logged. [To run self-tests, use: smartctl -t]
|
|
|
|
SMART Selective self-test log data structure revision number 1
|
|
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
|
|
1 0 0 Not_testing
|
|
2 0 0 Not_testing
|
|
3 0 0 Not_testing
|
|
4 0 0 Not_testing
|
|
5 0 0 Not_testing
|
|
Selective self-test flags (0x0):
|
|
After scanning selected spans, do NOT read-scan remainder of disk.
|
|
If Selective self-test is pending on power-up, resume after 0 minute delay.
|
|
|
|
SCT Status Version: 2
|
|
SCT Version (vendor specific): 258 (0x0102)
|
|
Device State: SMART Off-line Data Collection executing in background (4)
|
|
Current Temperature: 61 Celsius
|
|
Power Cycle Min/Max Temperature: --/61 Celsius
|
|
Lifetime Min/Max Temperature: --/84 Celsius
|
|
|
|
SCT Temperature History Version: 2
|
|
Temperature Sampling Period: 1 minute
|
|
Temperature Logging Interval: 1 minute
|
|
Min/Max recommended Temperature: 5/65 Celsius
|
|
Min/Max Temperature Limit: 1/60 Celsius
|
|
Temperature History Size (Index): 128 (118)
|
|
|
|
SCT Error Recovery Control:
|
|
Read: Disabled
|
|
Write: Disabled
|
|
|
|
Device Statistics (GP/SMART Log 0x04) not supported
|
|
|
|
Pending Defects log (GP Log 0x0c) not supported
|
|
|
|
SATA Phy Event Counters (GP Log 0x11)
|
|
ID Size Value Description
|
|
0x0001 2 0 Command failed due to ICRC error
|
|
0x000a 2 3 Device-to-host register FISes sent due to a COMRESET
|
|
0x8000 4 1116 Vendor specific
|
|
|
|
|
|
|