80486DX2-66/SMART-open-study
1
0
Fork 0
mirror of https://github.com/bsdhw/SMART.git synced 2025-05-31 16:21:41 +05:30
Code Issues Activity
Files
master
SMART-open-study/HDD/WDC/WD2001/WD2001FASS-00W2B0/4D5495701718
Andrey Ponomarenko 06d1e49c98 Update of reports (new: 3633, modified: 0)
2023-02-14 01:25:13 +03:00

314 lines
16 KiB
Plaintext
Raw Permalink Blame History

smartctl 7.3 2022-02-28 r5338 [FreeBSD 13.1-RELEASE-p5 amd64] (local build)
Copyright (C) 2002-22, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Model Family: Western Digital Caviar Black
Device Model: WDC WD2001FASS-00W2B0
Serial Number: --
LU WWN Device Id: 5 0014ee ...
Firmware Version: 01.00101
User Capacity: 2,000,398,934,016 bytes [2.00 TB]
Sector Size: 512 bytes logical/physical
Rotation Rate: 7200 rpm
Device is: In smartctl database 7.3/5319
ATA Version is: ATA8-ACS (minor revision not indicated)
SATA Version is: SATA 2.6, 3.0 Gb/s
Local Time is: Fri Jan 27 05:11:33 2023 CST
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
AAM feature is: Disabled
APM level is: 128 (minimum power consumption without standby)
Rd look-ahead is: Enabled
Write cache is: Enabled
DSN feature is: Unavailable
ATA Security is: Disabled, frozen [SEC2]
Wt Cache Reorder: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x84) Offline data collection activity
was suspended by an interrupting command from host.
Auto Offline Data Collection: Enabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: (30360) seconds.
Offline data collection
capabilities: (0x7b) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 2) minutes.
Extended self-test routine
recommended polling time: ( 347) minutes.
Conveyance self-test routine
recommended polling time: ( 5) minutes.
SCT capabilities: (0x3037) SCT Status supported.
SCT Feature Control supported.
SCT Data Table supported.
SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE
1 Raw_Read_Error_Rate POSR-K 200 200 051 - 224
3 Spin_Up_Time POS--K 153 140 021 - 14325
4 Start_Stop_Count -O--CK 086 086 000 - 14483
5 Reallocated_Sector_Ct PO--CK 200 200 140 - 0
7 Seek_Error_Rate -OSR-K 200 200 000 - 0
9 Power_On_Hours -O--CK 021 021 000 - 58396
10 Spin_Retry_Count -O--CK 100 100 000 - 0
11 Calibration_Retry_Count -O--CK 100 100 000 - 0
12 Power_Cycle_Count -O--CK 099 099 000 - 1075
192 Power-Off_Retract_Count -O--CK 199 199 000 - 1000
193 Load_Cycle_Count -O--CK 190 190 000 - 32775
194 Temperature_Celsius -O---K 102 090 000 - 50
196 Reallocated_Event_Count -O--CK 200 200 000 - 0
197 Current_Pending_Sector -O--CK 200 200 000 - 16
198 Offline_Uncorrectable ----CK 200 200 000 - 6
199 UDMA_CRC_Error_Count -O--CK 200 200 000 - 0
200 Multi_Zone_Error_Rate ---R-- 200 194 000 - 22
||||||_ K auto-keep
|||||__ C event count
||||___ R error rate
|||____ S speed/performance
||_____ O updated online
|______ P prefailure warning
General Purpose Log Directory Version 1
SMART Log Directory Version 1 [multi-sector log support]
Address Access R/W Size Description
0x00 GPL,SL R/O 1 Log Directory
0x01 SL R/O 1 Summary SMART error log
0x02 SL R/O 5 Comprehensive SMART error log
0x03 GPL R/O 6 Ext. Comprehensive SMART error log
0x06 SL R/O 1 SMART self-test log
0x07 GPL R/O 1 Extended self-test log
0x09 SL R/W 1 Selective self-test log
0x10 GPL R/O 1 NCQ Command Error log
0x11 GPL R/O 1 SATA Phy Event Counters log
0x80-0x9f GPL,SL R/W 16 Host vendor specific log
0xa0-0xa7 GPL,SL VS 16 Device vendor specific log
0xa8-0xb5 GPL,SL VS 1 Device vendor specific log
0xb6 GPL VS 1 Device vendor specific log
0xb7 GPL,SL VS 1 Device vendor specific log
0xbd GPL,SL VS 1 Device vendor specific log
0xc0 GPL,SL VS 1 Device vendor specific log
0xc1 GPL VS 24 Device vendor specific log
0xe0 GPL,SL R/W 1 SCT Command/Status
0xe1 GPL,SL R/W 1 SCT Data Transfer
SMART Extended Comprehensive Error Log Version: 1 (6 sectors)
Device Error Count: 997 (device log contains only the most recent 24 errors)
CR = Command Register
FEATR = Features Register
COUNT = Count (was: Sector Count) Register
LBA_48 = Upper bytes of LBA High/Mid/Low Registers ] ATA-8
LH = LBA High (was: Cylinder High) Register ] LBA
LM = LBA Mid (was: Cylinder Low) Register ] Register
LL = LBA Low (was: Sector Number) Register ]
DV = Device (was: Device/Head) Register
DC = Device Control Register
ER = Error register
ST = Status register
Powered_Up_Time is measured from power on, and printed as
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
SS=sec, and sss=millisec. It "wraps" after 49.710 days.
Error 997 [12] occurred at disk power-on lifetime: 58389 hours (2432 days + 21 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
40 -- 51 00 40 00 05 00 a7 bd 2a 40 00 Error: UNC at LBA = 0x500a7bd2a = 21485829418
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
60 00 40 00 a0 00 85 00 74 ae e8 40 08 47d+18:53:59.393 READ FPDMA QUEUED
60 00 40 00 98 00 76 00 6b d2 28 40 08 47d+18:53:59.393 READ FPDMA QUEUED
60 00 80 00 90 00 05 00 a7 bd 68 40 08 47d+18:53:59.393 READ FPDMA QUEUED
60 00 40 00 88 00 05 00 a7 bd 28 40 08 47d+18:53:59.393 READ FPDMA QUEUED
2f 00 00 00 01 00 00 00 00 00 10 40 08 47d+18:53:59.392 READ LOG EXT
Error 996 [11] occurred at disk power-on lifetime: 58389 hours (2432 days + 21 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
40 -- 51 00 40 00 05 00 a7 bd 2a 40 00 Error: UNC at LBA = 0x500a7bd2a = 21485829418
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
60 00 40 00 78 00 85 00 74 ae e8 40 08 47d+18:53:57.487 READ FPDMA QUEUED
60 00 40 00 70 00 76 00 6b d2 28 40 08 47d+18:53:57.487 READ FPDMA QUEUED
60 00 80 00 68 00 05 00 a7 bd 68 40 08 47d+18:53:57.487 READ FPDMA QUEUED
60 00 40 00 60 00 05 00 a7 bd 28 40 08 47d+18:53:57.486 READ FPDMA QUEUED
2f 00 00 00 01 00 00 00 00 00 10 40 08 47d+18:53:57.486 READ LOG EXT
Error 995 [10] occurred at disk power-on lifetime: 58389 hours (2432 days + 21 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
40 -- 51 00 40 00 05 00 a7 bd 2a 40 00 Error: UNC at LBA = 0x500a7bd2a = 21485829418
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
60 00 40 00 50 00 85 00 74 ae e8 40 08 47d+18:53:55.580 READ FPDMA QUEUED
60 00 40 00 48 00 76 00 6b d2 28 40 08 47d+18:53:55.580 READ FPDMA QUEUED
60 00 80 00 40 00 05 00 a7 bd 68 40 08 47d+18:53:55.580 READ FPDMA QUEUED
60 00 40 00 38 00 05 00 a7 bd 28 40 08 47d+18:53:55.580 READ FPDMA QUEUED
2f 00 00 00 01 00 00 00 00 00 10 40 08 47d+18:53:55.580 READ LOG EXT
Error 994 [9] occurred at disk power-on lifetime: 58389 hours (2432 days + 21 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
40 -- 51 00 40 00 05 00 a7 bd 2a 40 00 Error: WP at LBA = 0x500a7bd2a = 21485829418
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
61 00 30 00 28 00 c2 00 66 d2 a8 40 08 47d+18:53:53.670 WRITE FPDMA QUEUED
61 00 08 00 20 00 c2 00 39 d2 28 40 08 47d+18:53:53.665 WRITE FPDMA QUEUED
61 00 08 00 18 00 c2 00 3c d2 80 40 08 47d+18:53:53.662 WRITE FPDMA QUEUED
61 00 20 00 10 00 c2 00 6c d2 e8 40 08 47d+18:53:53.662 WRITE FPDMA QUEUED
61 03 c0 00 08 00 d4 00 15 d2 e8 40 08 47d+18:53:53.657 WRITE FPDMA QUEUED
Error 993 [8] occurred at disk power-on lifetime: 58389 hours (2432 days + 21 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
40 -- 51 00 40 00 05 00 a7 bd 2a 40 00 Error: WP at LBA = 0x500a7bd2a = 21485829418
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
61 00 40 00 80 00 c0 00 cd d2 28 40 08 47d+18:53:51.726 WRITE FPDMA QUEUED
61 00 40 00 78 00 b1 00 50 a9 a8 40 08 47d+18:53:51.726 WRITE FPDMA QUEUED
61 00 40 00 70 00 c1 00 6a d2 e8 40 08 47d+18:53:51.720 WRITE FPDMA QUEUED
61 00 40 00 68 00 c0 00 cd d2 28 40 08 47d+18:53:51.720 WRITE FPDMA QUEUED
61 06 40 00 60 00 ba 00 9d a9 68 40 08 47d+18:53:51.719 WRITE FPDMA QUEUED
Error 992 [7] occurred at disk power-on lifetime: 58389 hours (2432 days + 21 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
40 -- 51 00 c0 00 05 00 a7 bd 2a 40 00 Error: WP at LBA = 0x500a7bd2a = 21485829418
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
61 00 40 00 b8 00 c4 00 d9 a9 28 40 08 47d+18:53:49.465 WRITE FPDMA QUEUED
61 00 40 00 b0 00 b1 00 50 a9 68 40 08 47d+18:53:49.464 WRITE FPDMA QUEUED
61 00 40 00 a8 00 b1 00 4f a9 a8 40 08 47d+18:53:49.464 WRITE FPDMA QUEUED
61 00 40 00 a0 00 b1 00 4f a9 68 40 08 47d+18:53:49.464 WRITE FPDMA QUEUED
61 00 40 00 98 00 14 00 06 96 28 40 08 47d+18:53:49.463 WRITE FPDMA QUEUED
Error 991 [6] occurred at disk power-on lifetime: 58389 hours (2432 days + 21 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
40 -- 51 00 c0 00 05 00 a7 bd 2a 40 00 Error: WP at LBA = 0x500a7bd2a = 21485829418
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
61 00 40 00 c0 00 c5 00 a3 a9 28 40 08 47d+18:53:47.481 WRITE FPDMA QUEUED
61 08 00 00 b8 00 b8 00 bc a9 28 40 08 47d+18:53:47.471 WRITE FPDMA QUEUED
61 00 01 00 b0 00 09 00 18 00 b6 40 08 47d+18:53:47.471 WRITE FPDMA QUEUED
61 02 00 00 a8 00 b8 00 b1 a9 68 40 08 47d+18:53:47.467 WRITE FPDMA QUEUED
61 08 00 00 a0 00 b8 00 a9 a9 68 40 08 47d+18:53:47.465 WRITE FPDMA QUEUED
Error 990 [5] occurred at disk power-on lifetime: 58389 hours (2432 days + 21 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
40 -- 51 00 c0 00 05 00 a7 bd 2a 40 00 Error: WP at LBA = 0x500a7bd2a = 21485829418
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
61 00 40 00 b8 00 d4 00 56 d2 a8 40 08 47d+18:53:45.510 WRITE FPDMA QUEUED
61 00 40 00 b0 00 c0 00 cd d2 28 40 08 47d+18:53:45.510 WRITE FPDMA QUEUED
61 00 40 00 a8 00 eb 00 ef a9 28 40 08 47d+18:53:45.510 WRITE FPDMA QUEUED
61 00 08 00 98 00 c6 00 31 d2 a8 40 08 47d+18:53:45.510 WRITE FPDMA QUEUED
61 00 40 00 90 00 b1 00 4f a9 e8 40 08 47d+18:53:45.509 WRITE FPDMA QUEUED
SMART Extended Self-test Log Version: 1 (1 sectors)
No self-tests have been logged. [To run self-tests, use: smartctl -t]
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
SCT Status Version: 3
SCT Version (vendor specific): 258 (0x0102)
Device State: Active (0)
Current Temperature: 51 Celsius
Power Cycle Min/Max Temperature: 31/53 Celsius
Lifetime Min/Max Temperature: 31/62 Celsius
Under/Over Temperature Limit Count: 0/0
SCT Temperature History Version: 2
Temperature Sampling Period: 1 minute
Temperature Logging Interval: 1 minute
Min/Max recommended Temperature: 0/60 Celsius
Min/Max Temperature Limit: -41/85 Celsius
Temperature History Size (Index): 478 (381)
SCT Error Recovery Control command not supported
Device Statistics (GP/SMART Log 0x04) not supported
Pending Defects log (GP Log 0x0c) not supported
SATA Phy Event Counters (GP Log 0x11)
ID Size Value Description
0x0001 2 0 Command failed due to ICRC error
0x0002 2 0 R_ERR response for data FIS
0x0003 2 0 R_ERR response for device-to-host data FIS
0x0004 2 0 R_ERR response for host-to-device data FIS
0x0005 2 0 R_ERR response for non-data FIS
0x0006 2 0 R_ERR response for device-to-host non-data FIS
0x0007 2 0 R_ERR response for host-to-device non-data FIS
0x000a 2 12 Device-to-host register FISes sent due to a COMRESET
0x000b 2 0 CRC errors within host-to-device FIS
0x8000 4 4152745 Vendor specific
View Git Blame Copy Permalink