80486DX2-66/SMART-open-study
1
0
Fork 0
mirror of https://github.com/bsdhw/SMART.git synced 2025-05-31 16:21:41 +05:30
Code Issues Activity
Files
master
SMART-open-study/HDD/WDC/WD2002/WD2002FYPS-01U1B1/B2ACAFBE7F52
Andrey Ponomarenko a41331e270 Update of reports (new: 14, modified: 3797)
2023-02-14 02:15:20 +03:00

319 lines
16 KiB
Plaintext
Raw Permalink Blame History

smartctl 7.1 2019-12-30 r5022 [FreeBSD 12.1-RELEASE amd64] (local build)
Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Model Family: Western Digital RE4-GP
Device Model: WDC WD2002FYPS-01U1B1
Serial Number: --
LU WWN Device Id: 5 0014ee ...
Firmware Version: 04.05D06
User Capacity: 2,000,398,934,016 bytes [2.00 TB]
Sector Size: 512 bytes logical/physical
Rotation Rate: 5400 rpm
Device is: In smartctl database [for details use: -P show]
ATA Version is: ATA8-ACS (minor revision not indicated)
SATA Version is: SATA 2.6, 3.0 Gb/s
Local Time is: Sat Feb 13 07:56:06 2021 EST
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
AAM feature is: Disabled
APM level is: 128 (minimum power consumption without standby)
Rd look-ahead is: Enabled
Write cache is: Enabled
DSN feature is: Unavailable
ATA Security is: Disabled, frozen [SEC2]
Wt Cache Reorder: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x84) Offline data collection activity
was suspended by an interrupting command from host.
Auto Offline Data Collection: Enabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: (40200) seconds.
Offline data collection
capabilities: (0x7b) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 2) minutes.
Extended self-test routine
recommended polling time: ( 457) minutes.
Conveyance self-test routine
recommended polling time: ( 5) minutes.
SCT capabilities: (0x303f) SCT Status supported.
SCT Error Recovery Control supported.
SCT Feature Control supported.
SCT Data Table supported.
SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE
1 Raw_Read_Error_Rate POSR-K 200 200 051 - 19
3 Spin_Up_Time POS--K 145 139 021 - 9733
4 Start_Stop_Count -O--CK 100 100 000 - 394
5 Reallocated_Sector_Ct PO--CK 200 200 140 - 0
7 Seek_Error_Rate -OSR-K 200 200 000 - 0
9 Power_On_Hours -O--CK 047 047 000 - 38927
10 Spin_Retry_Count -O--CK 100 100 000 - 0
11 Calibration_Retry_Count -O--CK 100 100 000 - 0
12 Power_Cycle_Count -O--CK 100 100 000 - 392
192 Power-Off_Retract_Count -O--CK 200 200 000 - 90
193 Load_Cycle_Count -O--CK 094 094 000 - 319871
194 Temperature_Celsius -O---K 121 100 000 - 31
196 Reallocated_Event_Count -O--CK 200 200 000 - 0
197 Current_Pending_Sector -O--CK 200 200 000 - 15
198 Offline_Uncorrectable ----CK 200 200 000 - 24
199 UDMA_CRC_Error_Count -O--CK 200 200 000 - 0
200 Multi_Zone_Error_Rate ---R-- 164 164 000 - 7326
||||||_ K auto-keep
|||||__ C event count
||||___ R error rate
|||____ S speed/performance
||_____ O updated online
|______ P prefailure warning
General Purpose Log Directory Version 1
SMART Log Directory Version 1 [multi-sector log support]
Address Access R/W Size Description
0x00 GPL,SL R/O 1 Log Directory
0x01 SL R/O 1 Summary SMART error log
0x02 SL R/O 5 Comprehensive SMART error log
0x03 GPL R/O 6 Ext. Comprehensive SMART error log
0x06 SL R/O 1 SMART self-test log
0x07 GPL R/O 1 Extended self-test log
0x09 SL R/W 1 Selective self-test log
0x10 GPL R/O 1 NCQ Command Error log
0x11 GPL R/O 1 SATA Phy Event Counters log
0x80-0x9f GPL,SL R/W 16 Host vendor specific log
0xa0-0xa7 GPL,SL VS 16 Device vendor specific log
0xa8-0xb5 GPL,SL VS 1 Device vendor specific log
0xb6 GPL VS 1 Device vendor specific log
0xb7 GPL,SL VS 1 Device vendor specific log
0xbd GPL,SL VS 1 Device vendor specific log
0xc0 GPL,SL VS 1 Device vendor specific log
0xc1 GPL VS 24 Device vendor specific log
0xe0 GPL,SL R/W 1 SCT Command/Status
0xe1 GPL,SL R/W 1 SCT Data Transfer
SMART Extended Comprehensive Error Log Version: 1 (6 sectors)
Device Error Count: 104 (device log contains only the most recent 24 errors)
CR = Command Register
FEATR = Features Register
COUNT = Count (was: Sector Count) Register
LBA_48 = Upper bytes of LBA High/Mid/Low Registers ] ATA-8
LH = LBA High (was: Cylinder High) Register ] LBA
LM = LBA Mid (was: Cylinder Low) Register ] Register
LL = LBA Low (was: Sector Number) Register ]
DV = Device (was: Device/Head) Register
DC = Device Control Register
ER = Error register
ST = Status register
Powered_Up_Time is measured from power on, and printed as
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
SS=sec, and sss=millisec. It "wraps" after 49.710 days.
Error 104 [7] occurred at disk power-on lifetime: 38907 hours (1621 days + 3 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
40 -- 51 01 00 00 07 85 00 03 c4 40 00 Error: UNC at LBA = 0x7850003c4 = 32296141764
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
60 01 00 00 78 00 00 07 03 85 58 40 08 00:02:38.260 READ FPDMA QUEUED
60 00 28 00 70 00 00 07 03 85 30 40 08 00:02:38.260 READ FPDMA QUEUED
60 00 d0 00 68 00 00 07 03 84 58 40 08 00:02:38.260 READ FPDMA QUEUED
60 01 00 00 60 00 00 07 03 83 58 40 08 00:02:38.259 READ FPDMA QUEUED
60 01 00 00 58 00 00 07 03 82 58 40 08 00:02:38.258 READ FPDMA QUEUED
Error 103 [6] occurred at disk power-on lifetime: 38867 hours (1619 days + 11 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
40 -- 51 00 01 00 04 b3 00 9a 04 40 00 Error: UNC at LBA = 0x4b3009a04 = 20183030276
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
60 00 40 00 a0 00 00 02 33 cb 30 40 00 03:21:56.375 READ FPDMA QUEUED
61 00 08 00 98 00 00 00 69 d6 d8 40 00 03:21:56.374 WRITE FPDMA QUEUED
60 00 01 00 90 00 00 04 9a b3 04 40 00 03:21:56.374 READ FPDMA QUEUED
61 01 00 00 88 00 00 00 6a 13 48 40 00 03:21:56.373 WRITE FPDMA QUEUED
61 00 08 00 80 00 00 75 03 f7 b8 40 00 03:21:56.373 WRITE FPDMA QUEUED
Error 102 [5] occurred at disk power-on lifetime: 38867 hours (1619 days + 11 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
40 -- 51 00 01 00 04 b3 00 9a 03 40 00 Error: UNC at LBA = 0x4b3009a03 = 20183030275
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
60 00 01 00 58 00 00 04 9a b3 03 40 00 03:21:53.817 READ FPDMA QUEUED
60 00 20 00 50 00 00 00 26 0f 5b 40 00 03:21:53.814 READ FPDMA QUEUED
61 00 08 00 48 00 00 04 65 6d 20 40 00 03:21:53.814 WRITE FPDMA QUEUED
61 00 08 00 40 00 00 00 f7 07 78 40 00 03:21:53.814 WRITE FPDMA QUEUED
2f 00 00 00 01 00 00 00 00 00 10 e0 00 03:21:53.814 READ LOG EXT
Error 101 [4] occurred at disk power-on lifetime: 38867 hours (1619 days + 11 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
40 -- 51 00 01 00 04 b3 00 9a 02 40 00 Error: UNC at LBA = 0x4b3009a02 = 20183030274
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
60 00 01 00 38 00 00 04 9a b3 02 40 00 03:21:51.261 READ FPDMA QUEUED
61 00 08 00 30 00 00 00 69 d6 50 40 00 03:21:51.252 WRITE FPDMA QUEUED
60 00 20 00 28 00 00 00 26 0f 23 40 00 03:21:51.252 READ FPDMA QUEUED
60 00 01 00 20 00 00 04 9a b3 01 40 00 03:21:51.252 READ FPDMA QUEUED
61 00 08 00 18 00 00 04 8c 62 d0 40 00 03:21:51.252 WRITE FPDMA QUEUED
Error 100 [3] occurred at disk power-on lifetime: 38867 hours (1619 days + 11 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
40 -- 51 00 40 00 04 b3 00 9a 00 40 00 Error: UNC at LBA = 0x4b3009a00 = 20183030272
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
60 00 20 00 b0 00 00 03 3c cb c0 40 00 03:21:47.793 READ FPDMA QUEUED
61 00 33 00 a8 00 00 01 af 84 d8 40 00 03:21:47.793 WRITE FPDMA QUEUED
61 00 20 00 a0 00 00 7e 16 72 20 40 00 03:21:47.792 WRITE FPDMA QUEUED
61 00 20 00 98 00 00 7e 16 72 20 40 00 03:21:47.792 WRITE FPDMA QUEUED
61 00 20 00 90 00 00 7e 24 87 a0 40 00 03:21:47.792 WRITE FPDMA QUEUED
Error 99 [2] occurred at disk power-on lifetime: 38867 hours (1619 days + 11 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
40 -- 51 00 01 00 0d c7 00 42 38 40 00 Error: UNC at LBA = 0xdc7004238 = 59173257784
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
60 00 01 00 18 00 00 0d 42 c7 38 40 00 03:11:53.070 READ FPDMA QUEUED
60 00 01 00 10 00 00 0d 42 c7 37 40 00 03:11:53.069 READ FPDMA QUEUED
60 00 01 00 08 00 00 0d 42 c7 36 40 00 03:11:53.069 READ FPDMA QUEUED
60 00 01 00 f8 00 00 0d 42 c7 35 40 00 03:11:53.069 READ FPDMA QUEUED
61 00 08 00 f0 00 00 00 69 d6 50 40 00 03:11:53.034 WRITE FPDMA QUEUED
Error 98 [1] occurred at disk power-on lifetime: 38867 hours (1619 days + 11 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
40 -- 51 00 a0 00 0d c7 00 42 38 40 00 Error: WP at LBA = 0xdc7004238 = 59173257784
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
61 01 00 00 68 00 00 00 f3 af 00 40 00 03:11:46.576 WRITE FPDMA QUEUED
61 01 00 00 58 00 00 00 f3 ae 00 40 00 03:11:46.575 WRITE FPDMA QUEUED
61 01 00 00 50 00 00 00 f3 ad 00 40 00 03:11:46.575 WRITE FPDMA QUEUED
61 01 00 00 48 00 00 00 f3 ac 00 40 00 03:11:46.574 WRITE FPDMA QUEUED
61 01 00 00 40 00 00 00 f3 ab 00 40 00 03:11:46.574 WRITE FPDMA QUEUED
Error 97 [0] occurred at disk power-on lifetime: 38866 hours (1619 days + 10 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
40 -- 51 00 08 00 01 41 00 e4 68 40 00 Error: WP at LBA = 0x14100e468 = 5385544808
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
61 00 08 00 08 00 00 01 78 27 98 40 00 02:38:58.337 WRITE FPDMA QUEUED
60 00 08 00 f8 00 00 02 c7 92 20 40 00 02:38:58.290 READ FPDMA QUEUED
61 00 08 00 f0 00 00 7d 14 58 58 40 00 02:38:58.213 WRITE FPDMA QUEUED
61 00 08 00 e8 00 00 39 32 0f 50 40 00 02:38:58.133 WRITE FPDMA QUEUED
61 00 08 00 e0 00 00 39 32 0f 48 40 00 02:38:58.104 WRITE FPDMA QUEUED
SMART Extended Self-test Log Version: 1 (1 sectors)
No self-tests have been logged. [To run self-tests, use: smartctl -t]
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
SCT Status Version: 2
SCT Version (vendor specific): 258 (0x0102)
Device State: SMART Off-line Data Collection executing in background (4)
Current Temperature: 31 Celsius
Power Cycle Min/Max Temperature: 31/32 Celsius
Lifetime Min/Max Temperature: 31/52 Celsius
Under/Over Temperature Limit Count: 0/0
SCT Temperature History Version: 2
Temperature Sampling Period: 1 minute
Temperature Logging Interval: 1 minute
Min/Max recommended Temperature: 0/60 Celsius
Min/Max Temperature Limit: -41/85 Celsius
Temperature History Size (Index): 478 (329)
SCT Error Recovery Control:
Read: 70 (7.0 seconds)
Write: 70 (7.0 seconds)
Device Statistics (GP/SMART Log 0x04) not supported
Pending Defects log (GP Log 0x0c) not supported
SATA Phy Event Counters (GP Log 0x11)
ID Size Value Description
0x0001 2 0 Command failed due to ICRC error
0x0002 2 0 R_ERR response for data FIS
0x0003 2 0 R_ERR response for device-to-host data FIS
0x0004 2 0 R_ERR response for host-to-device data FIS
0x0005 2 0 R_ERR response for non-data FIS
0x0006 2 0 R_ERR response for device-to-host non-data FIS
0x0007 2 0 R_ERR response for host-to-device non-data FIS
0x000a 2 2 Device-to-host register FISes sent due to a COMRESET
0x000b 2 0 CRC errors within host-to-device FIS
0x8000 4 250 Vendor specific
View Git Blame Copy Permalink