80486DX2-66/SMART-open-study
1
0
Fork 0
mirror of https://github.com/bsdhw/SMART.git synced 2025-05-31 16:21:41 +05:30
Code Issues Activity
Files
master
SMART-open-study/HDD/WDC/WD2002/WD2002FYPS-02W3B0/22D62C06714A
Andrey Ponomarenko b1c41e7edc Update of reports (new: 3637, modified: 0)
2022-03-18 23:39:11 +03:00

322 lines
16 KiB
Plaintext
Raw Permalink Blame History

smartctl 7.2 2021-09-14 r5236 [FreeBSD 13.0-RELEASE-p5 amd64] (local build)
Copyright (C) 2002-20, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Model Family: Western Digital RE4-GP
Device Model: WDC WD2002FYPS-02W3B0
Serial Number: --
LU WWN Device Id: 5 0014ee ...
Firmware Version: 04.01G01
User Capacity: 2,000,398,934,016 bytes [2.00 TB]
Sector Size: 512 bytes logical/physical
Rotation Rate: 5400 rpm
Device is: In smartctl database [for details use: -P show]
ATA Version is: ATA8-ACS (minor revision not indicated)
SATA Version is: SATA 2.6, 3.0 Gb/s
Local Time is: Fri Jan 28 08:55:07 2022 CET
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
AAM level is: 254 (maximum performance), recommended: 128
APM level is: 128 (minimum power consumption without standby)
Rd look-ahead is: Enabled
Write cache is: Enabled
DSN feature is: Unavailable
ATA Security is: Disabled, NOT FROZEN [SEC1]
Wt Cache Reorder: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x84) Offline data collection activity
was suspended by an interrupting command from host.
Auto Offline Data Collection: Enabled.
Self-test execution status: ( 41) The self-test routine was interrupted
by the host with a hard or soft reset.
Total time to complete Offline
data collection: (42900) seconds.
Offline data collection
capabilities: (0x7b) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 2) minutes.
Extended self-test routine
recommended polling time: ( 434) minutes.
Conveyance self-test routine
recommended polling time: ( 5) minutes.
SCT capabilities: (0x303f) SCT Status supported.
SCT Error Recovery Control supported.
SCT Feature Control supported.
SCT Data Table supported.
SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE
1 Raw_Read_Error_Rate POSR-K 200 200 051 - 6921
3 Spin_Up_Time POS--K 253 230 021 - 3516
4 Start_Stop_Count -O--CK 096 096 000 - 4320
5 Reallocated_Sector_Ct PO--CK 199 199 140 - 1
7 Seek_Error_Rate -OSR-K 066 066 000 - 5451
9 Power_On_Hours -O--CK 066 066 000 - 24848
10 Spin_Retry_Count -O--CK 100 100 000 - 0
11 Calibration_Retry_Count -O--CK 100 100 000 - 0
12 Power_Cycle_Count -O--CK 100 100 000 - 436
192 Power-Off_Retract_Count -O--CK 200 200 000 - 265
193 Load_Cycle_Count -O--CK 132 132 000 - 205060
194 Temperature_Celsius -O---K 110 098 000 - 42
196 Reallocated_Event_Count -O--CK 199 199 000 - 1
197 Current_Pending_Sector -O--CK 196 196 000 - 1399
198 Offline_Uncorrectable ----CK 200 200 000 - 16
199 UDMA_CRC_Error_Count -O--CK 200 200 000 - 0
200 Multi_Zone_Error_Rate ---R-- 196 196 000 - 909
||||||_ K auto-keep
|||||__ C event count
||||___ R error rate
|||____ S speed/performance
||_____ O updated online
|______ P prefailure warning
General Purpose Log Directory Version 1
SMART Log Directory Version 1 [multi-sector log support]
Address Access R/W Size Description
0x00 GPL,SL R/O 1 Log Directory
0x01 SL R/O 1 Summary SMART error log
0x02 SL R/O 5 Comprehensive SMART error log
0x03 GPL R/O 6 Ext. Comprehensive SMART error log
0x06 SL R/O 1 SMART self-test log
0x07 GPL R/O 1 Extended self-test log
0x09 SL R/W 1 Selective self-test log
0x10 GPL R/O 1 NCQ Command Error log
0x11 GPL R/O 1 SATA Phy Event Counters log
0x80-0x9f GPL,SL R/W 16 Host vendor specific log
0xa0-0xa7 GPL,SL VS 16 Device vendor specific log
0xa8-0xb5 GPL,SL VS 1 Device vendor specific log
0xb6 GPL VS 1 Device vendor specific log
0xb7 GPL,SL VS 1 Device vendor specific log
0xbd GPL,SL VS 1 Device vendor specific log
0xc0 GPL,SL VS 1 Device vendor specific log
0xc1 GPL VS 24 Device vendor specific log
0xe0 GPL,SL R/W 1 SCT Command/Status
0xe1 GPL,SL R/W 1 SCT Data Transfer
SMART Extended Comprehensive Error Log Version: 1 (6 sectors)
Device Error Count: 3448 (device log contains only the most recent 24 errors)
CR = Command Register
FEATR = Features Register
COUNT = Count (was: Sector Count) Register
LBA_48 = Upper bytes of LBA High/Mid/Low Registers ] ATA-8
LH = LBA High (was: Cylinder High) Register ] LBA
LM = LBA Mid (was: Cylinder Low) Register ] Register
LL = LBA Low (was: Sector Number) Register ]
DV = Device (was: Device/Head) Register
DC = Device Control Register
ER = Error register
ST = Status register
Powered_Up_Time is measured from power on, and printed as
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
SS=sec, and sss=millisec. It "wraps" after 49.710 days.
Error 3448 [15] occurred at disk power-on lifetime: 24842 hours (1035 days + 2 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
04 -- 51 00 01 00 00 00 00 00 00 00 00 Error: ABRT at LBA = 0x00000000 = 0
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
60 00 01 00 40 00 00 00 00 00 00 40 08 3d+11:01:06.715 READ FPDMA QUEUED
2f 00 00 00 01 00 00 00 00 00 10 40 00 3d+11:01:06.715 READ LOG EXT
60 00 01 00 30 00 00 00 00 00 00 40 08 3d+11:01:06.673 READ FPDMA QUEUED
2f 00 00 00 01 00 00 00 00 00 10 40 00 3d+11:01:06.673 READ LOG EXT
60 00 01 00 20 00 00 00 00 00 00 40 08 3d+11:01:06.631 READ FPDMA QUEUED
Error 3447 [14] occurred at disk power-on lifetime: 24842 hours (1035 days + 2 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
04 -- 51 00 01 00 00 00 00 00 00 00 00 Error: ABRT at LBA = 0x00000000 = 0
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
60 00 01 00 30 00 00 00 00 00 00 40 08 3d+11:01:06.673 READ FPDMA QUEUED
2f 00 00 00 01 00 00 00 00 00 10 40 00 3d+11:01:06.673 READ LOG EXT
60 00 01 00 20 00 00 00 00 00 00 40 08 3d+11:01:06.631 READ FPDMA QUEUED
2f 00 00 00 01 00 00 00 00 00 10 40 00 3d+11:01:06.631 READ LOG EXT
60 00 01 00 10 00 00 00 00 00 00 40 08 3d+11:01:06.589 READ FPDMA QUEUED
Error 3446 [13] occurred at disk power-on lifetime: 24842 hours (1035 days + 2 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
04 -- 51 00 01 00 00 00 00 00 00 00 00 Error: ABRT at LBA = 0x00000000 = 0
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
60 00 01 00 20 00 00 00 00 00 00 40 08 3d+11:01:06.631 READ FPDMA QUEUED
2f 00 00 00 01 00 00 00 00 00 10 40 00 3d+11:01:06.631 READ LOG EXT
60 00 01 00 10 00 00 00 00 00 00 40 08 3d+11:01:06.589 READ FPDMA QUEUED
2f 00 00 00 01 00 00 00 00 00 10 40 00 3d+11:01:06.589 READ LOG EXT
60 00 01 00 00 00 00 00 00 00 00 40 08 3d+11:01:02.274 READ FPDMA QUEUED
Error 3445 [12] occurred at disk power-on lifetime: 24842 hours (1035 days + 2 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
04 -- 51 00 01 00 00 00 00 00 00 00 00 Error: ABRT at LBA = 0x00000000 = 0
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
60 00 01 00 10 00 00 00 00 00 00 40 08 3d+11:01:06.589 READ FPDMA QUEUED
2f 00 00 00 01 00 00 00 00 00 10 40 00 3d+11:01:06.589 READ LOG EXT
60 00 01 00 00 00 00 00 00 00 00 40 08 3d+11:01:02.274 READ FPDMA QUEUED
b0 00 d5 00 01 00 00 00 c2 4f 01 40 00 3d+10:57:34.233 SMART READ LOG
b0 00 d5 00 01 00 00 00 c2 4f 06 40 00 3d+10:57:34.232 SMART READ LOG
Error 3444 [11] occurred at disk power-on lifetime: 24842 hours (1035 days + 2 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
04 -- 51 00 01 00 00 00 00 00 00 40 00 Error: ABRT at LBA = 0x00000000 = 0
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
60 00 01 00 00 00 00 00 00 00 00 40 08 3d+11:01:02.274 READ FPDMA QUEUED
b0 00 d5 00 01 00 00 00 c2 4f 01 40 00 3d+10:57:34.233 SMART READ LOG
b0 00 d5 00 01 00 00 00 c2 4f 06 40 00 3d+10:57:34.232 SMART READ LOG
b0 00 d0 00 01 00 00 00 c2 4f 00 40 00 3d+10:57:34.229 SMART READ DATA
b0 00 da 00 00 00 00 00 c2 4f 00 40 00 3d+10:57:30.457 SMART RETURN STATUS
Error 3443 [10] occurred at disk power-on lifetime: 24780 hours (1032 days + 12 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
40 -- 51 02 00 00 00 28 bf 54 f8 40 00 Error: UNC at LBA = 0x28bf54f8 = 683627768
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
60 02 00 00 08 00 00 28 bf 54 00 40 08 20:33:26.593 READ FPDMA QUEUED
2f 00 00 00 01 00 00 00 00 00 10 40 08 20:33:26.592 READ LOG EXT
60 02 00 00 f8 00 00 28 bf 54 00 40 08 20:33:24.228 READ FPDMA QUEUED
2f 00 00 00 01 00 00 00 00 00 10 40 08 20:33:24.228 READ LOG EXT
60 02 00 00 e8 00 00 28 bf 54 00 40 08 20:33:21.864 READ FPDMA QUEUED
Error 3442 [9] occurred at disk power-on lifetime: 24780 hours (1032 days + 12 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
40 -- 51 02 00 00 00 28 bf 54 f8 40 00 Error: UNC at LBA = 0x28bf54f8 = 683627768
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
60 02 00 00 f8 00 00 28 bf 54 00 40 08 20:33:24.228 READ FPDMA QUEUED
2f 00 00 00 01 00 00 00 00 00 10 40 08 20:33:24.228 READ LOG EXT
60 02 00 00 e8 00 00 28 bf 54 00 40 08 20:33:21.864 READ FPDMA QUEUED
2f 00 00 00 01 00 00 00 00 00 10 40 08 20:33:21.864 READ LOG EXT
60 02 00 00 d8 00 00 28 bf 54 00 40 08 20:33:19.489 READ FPDMA QUEUED
Error 3441 [8] occurred at disk power-on lifetime: 24780 hours (1032 days + 12 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
40 -- 51 02 00 00 00 28 bf 54 f8 40 00 Error: UNC at LBA = 0x28bf54f8 = 683627768
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
60 02 00 00 e8 00 00 28 bf 54 00 40 08 20:33:21.864 READ FPDMA QUEUED
2f 00 00 00 01 00 00 00 00 00 10 40 08 20:33:21.864 READ LOG EXT
60 02 00 00 d8 00 00 28 bf 54 00 40 08 20:33:19.489 READ FPDMA QUEUED
2f 00 00 00 01 00 00 00 00 00 10 40 08 20:33:19.489 READ LOG EXT
60 02 00 00 c8 00 00 28 bf 54 00 40 08 20:33:17.131 READ FPDMA QUEUED
SMART Extended Self-test Log Version: 1 (1 sectors)
Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
# 1 Extended captive Interrupted (host reset) 90% 24811 -
# 2 Extended offline Completed: servo/seek failure 90% 24811 4294967295
# 3 Extended offline Completed: read failure 90% 24775 6046936
# 4 Extended offline Completed without error 00% 18264 -
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
SCT Status Version: 3
SCT Version (vendor specific): 258 (0x0102)
Device State: Active (0)
Current Temperature: 42 Celsius
Power Cycle Min/Max Temperature: 22/44 Celsius
Lifetime Min/Max Temperature: 22/55 Celsius
Under/Over Temperature Limit Count: 0/0
SCT Temperature History Version: 2
Temperature Sampling Period: 1 minute
Temperature Logging Interval: 1 minute
Min/Max recommended Temperature: 0/60 Celsius
Min/Max Temperature Limit: -41/85 Celsius
Temperature History Size (Index): 478 (7)
SCT Error Recovery Control:
Read: 70 (7.0 seconds)
Write: 70 (7.0 seconds)
Device Statistics (GP/SMART Log 0x04) not supported
Pending Defects log (GP Log 0x0c) not supported
SATA Phy Event Counters (GP Log 0x11)
ID Size Value Description
0x0001 2 0 Command failed due to ICRC error
0x0002 2 0 R_ERR response for data FIS
0x0003 2 0 R_ERR response for device-to-host data FIS
0x0004 2 0 R_ERR response for host-to-device data FIS
0x0005 2 0 R_ERR response for non-data FIS
0x0006 2 0 R_ERR response for device-to-host non-data FIS
0x0007 2 0 R_ERR response for host-to-device non-data FIS
0x000a 2 9 Device-to-host register FISes sent due to a COMRESET
0x000b 2 0 CRC errors within host-to-device FIS
0x8000 4 320076 Vendor specific
View Git Blame Copy Permalink