80486DX2-66/SMART-open-study
1
0
Fork 0
mirror of https://github.com/bsdhw/SMART.git synced 2025-05-31 16:21:41 +05:30
Code Issues Activity
Files
master
SMART-open-study/HDD/WDC/WD30/WD30EFRX-68EUZN0/7DCE5E6BEE63
Andrey Ponomarenko f8d5dc7417 Update of reports (new: 129, modified: 0)
2020-06-22 15:26:52 +03:00

344 lines
18 KiB
Plaintext
Raw Permalink Blame History

smartctl 7.0 2018-12-30 r4883 [FreeBSD 11.3-RELEASE-p7 amd64] (local build)
Copyright (C) 2002-18, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Model Family: Western Digital Red
Device Model: WDC WD30EFRX-68EUZN0
Serial Number: --
LU WWN Device Id: 5 0014ee ...
Firmware Version: 82.00A82
User Capacity: 3,000,592,982,016 bytes [3.00 TB]
Sector Sizes: 512 bytes logical, 4096 bytes physical
Rotation Rate: 5400 rpm
Device is: In smartctl database [for details use: -P show]
ATA Version is: ACS-2 (minor revision not indicated)
SATA Version is: SATA 3.0, 6.0 Gb/s (current: 6.0 Gb/s)
Local Time is: Fri Jun 5 11:15:55 2020 EDT
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
AAM feature is: Unavailable
APM feature is: Unavailable
Rd look-ahead is: Enabled
Write cache is: Enabled
DSN feature is: Unavailable
ATA Security is: Disabled, NOT FROZEN [SEC1]
Wt Cache Reorder: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x00) Offline data collection activity
was never started.
Auto Offline Data Collection: Disabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: (38400) seconds.
Offline data collection
capabilities: (0x7b) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 2) minutes.
Extended self-test routine
recommended polling time: ( 385) minutes.
Conveyance self-test routine
recommended polling time: ( 5) minutes.
SCT capabilities: (0x703d) SCT Status supported.
SCT Error Recovery Control supported.
SCT Feature Control supported.
SCT Data Table supported.
SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE
1 Raw_Read_Error_Rate POSR-K 200 200 051 - 92
3 Spin_Up_Time POS--K 191 180 021 - 5433
4 Start_Stop_Count -O--CK 100 100 000 - 34
5 Reallocated_Sector_Ct PO--CK 200 200 140 - 0
7 Seek_Error_Rate -OSR-K 200 200 000 - 0
9 Power_On_Hours -O--CK 032 032 000 - 49960
10 Spin_Retry_Count -O--CK 100 253 000 - 0
11 Calibration_Retry_Count -O--CK 100 253 000 - 0
12 Power_Cycle_Count -O--CK 100 100 000 - 34
192 Power-Off_Retract_Count -O--CK 200 200 000 - 33
193 Load_Cycle_Count -O--CK 199 199 000 - 5136
194 Temperature_Celsius -O---K 119 114 000 - 31
196 Reallocated_Event_Count -O--CK 200 200 000 - 0
197 Current_Pending_Sector -O--CK 200 200 000 - 0
198 Offline_Uncorrectable ----CK 100 253 000 - 0
199 UDMA_CRC_Error_Count -O--CK 200 200 000 - 0
200 Multi_Zone_Error_Rate ---R-- 200 200 000 - 0
||||||_ K auto-keep
|||||__ C event count
||||___ R error rate
|||____ S speed/performance
||_____ O updated online
|______ P prefailure warning
General Purpose Log Directory Version 1
SMART Log Directory Version 1 [multi-sector log support]
Address Access R/W Size Description
0x00 GPL,SL R/O 1 Log Directory
0x01 SL R/O 1 Summary SMART error log
0x02 SL R/O 5 Comprehensive SMART error log
0x03 GPL R/O 6 Ext. Comprehensive SMART error log
0x06 SL R/O 1 SMART self-test log
0x07 GPL R/O 1 Extended self-test log
0x09 SL R/W 1 Selective self-test log
0x10 GPL R/O 1 NCQ Command Error log
0x11 GPL R/O 1 SATA Phy Event Counters log
0x21 GPL R/O 1 Write stream error log
0x22 GPL R/O 1 Read stream error log
0x80-0x9f GPL,SL R/W 16 Host vendor specific log
0xa0-0xa7 GPL,SL VS 16 Device vendor specific log
0xa8-0xb7 GPL,SL VS 1 Device vendor specific log
0xbd GPL,SL VS 1 Device vendor specific log
0xc0 GPL,SL VS 1 Device vendor specific log
0xc1 GPL VS 93 Device vendor specific log
0xe0 GPL,SL R/W 1 SCT Command/Status
0xe1 GPL,SL R/W 1 SCT Data Transfer
SMART Extended Comprehensive Error Log Version: 1 (6 sectors)
Device Error Count: 88 (device log contains only the most recent 24 errors)
CR = Command Register
FEATR = Features Register
COUNT = Count (was: Sector Count) Register
LBA_48 = Upper bytes of LBA High/Mid/Low Registers ] ATA-8
LH = LBA High (was: Cylinder High) Register ] LBA
LM = LBA Mid (was: Cylinder Low) Register ] Register
LL = LBA Low (was: Sector Number) Register ]
DV = Device (was: Device/Head) Register
DC = Device Control Register
ER = Error register
ST = Status register
Powered_Up_Time is measured from power on, and printed as
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
SS=sec, and sss=millisec. It "wraps" after 49.710 days.
Error 88 [15] occurred at disk power-on lifetime: 20162 hours (840 days + 2 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
40 -- 51 08 e9 00 01 5d 50 9a c7 40 00 Error: UNC at LBA = 0x15d509ac7 = 5860530887
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
42 00 00 08 e9 00 01 5d 50 9a c7 40 00 7d+18:48:33.566 READ VERIFY SECTOR(S) EXT
42 00 00 00 01 00 01 5d 50 57 27 40 00 7d+18:48:33.514 READ VERIFY SECTOR(S) EXT
61 00 01 00 00 00 01 5d 50 57 27 40 00 7d+18:48:33.513 WRITE FPDMA QUEUED
42 00 00 00 17 00 01 5d 50 57 69 40 00 7d+18:48:33.456 READ VERIFY SECTOR(S) EXT
61 00 17 00 00 00 01 5d 50 57 69 40 00 7d+18:48:33.456 WRITE FPDMA QUEUED
Error 87 [14] occurred at disk power-on lifetime: 20162 hours (840 days + 2 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
40 -- 51 08 ea 00 01 5d 50 9a c6 40 00 Error: UNC at LBA = 0x15d509ac6 = 5860530886
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
42 00 00 08 ea 00 01 5d 50 9a c6 40 00 7d+18:48:32.567 READ VERIFY SECTOR(S) EXT
42 00 00 00 01 00 01 5d 50 57 27 40 00 7d+18:48:32.515 READ VERIFY SECTOR(S) EXT
61 00 01 00 00 00 01 5d 50 57 27 40 00 7d+18:48:32.514 WRITE FPDMA QUEUED
42 00 00 00 17 00 01 5d 50 57 69 40 00 7d+18:48:32.446 READ VERIFY SECTOR(S) EXT
61 00 17 00 00 00 01 5d 50 57 69 40 00 7d+18:48:32.446 WRITE FPDMA QUEUED
Error 86 [13] occurred at disk power-on lifetime: 20162 hours (840 days + 2 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
40 -- 51 08 eb 00 01 5d 50 9a c5 40 00 Error: UNC at LBA = 0x15d509ac5 = 5860530885
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
42 00 00 08 eb 00 01 5d 50 9a c5 40 00 7d+18:48:31.601 READ VERIFY SECTOR(S) EXT
42 00 00 00 01 00 01 5d 50 57 27 40 00 7d+18:48:31.549 READ VERIFY SECTOR(S) EXT
61 00 01 00 00 00 01 5d 50 57 27 40 00 7d+18:48:31.549 WRITE FPDMA QUEUED
42 00 00 00 17 00 01 5d 50 57 69 40 00 7d+18:48:31.480 READ VERIFY SECTOR(S) EXT
61 00 17 00 00 00 01 5d 50 57 69 40 00 7d+18:48:31.480 WRITE FPDMA QUEUED
Error 85 [12] occurred at disk power-on lifetime: 20162 hours (840 days + 2 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
40 -- 51 08 ec 00 01 5d 50 9a c4 40 00 Error: UNC at LBA = 0x15d509ac4 = 5860530884
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
42 00 00 08 ec 00 01 5d 50 9a c4 40 00 7d+18:48:30.534 READ VERIFY SECTOR(S) EXT
42 00 00 00 01 00 01 5d 50 57 27 40 00 7d+18:48:30.499 READ VERIFY SECTOR(S) EXT
61 00 01 00 00 00 01 5d 50 57 27 40 00 7d+18:48:30.499 WRITE FPDMA QUEUED
42 00 00 00 17 00 01 5d 50 57 69 40 00 7d+18:48:30.470 READ VERIFY SECTOR(S) EXT
61 00 17 00 00 00 01 5d 50 57 69 40 00 7d+18:48:30.470 WRITE FPDMA QUEUED
Error 84 [11] occurred at disk power-on lifetime: 20162 hours (840 days + 2 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
40 -- 51 08 ed 00 01 5d 50 9a c3 40 00 Error: UNC at LBA = 0x15d509ac3 = 5860530883
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
42 00 00 08 ed 00 01 5d 50 9a c3 40 00 7d+18:48:29.628 READ VERIFY SECTOR(S) EXT
42 00 00 00 01 00 01 5d 50 57 27 40 00 7d+18:48:29.576 READ VERIFY SECTOR(S) EXT
61 00 01 00 00 00 01 5d 50 57 27 40 00 7d+18:48:29.576 WRITE FPDMA QUEUED
42 00 00 00 17 00 01 5d 50 57 69 40 00 7d+18:48:29.515 READ VERIFY SECTOR(S) EXT
61 00 17 00 00 00 01 5d 50 57 69 40 00 7d+18:48:29.515 WRITE FPDMA QUEUED
Error 83 [10] occurred at disk power-on lifetime: 20162 hours (840 days + 2 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
40 -- 51 08 ee 00 01 5d 50 9a c2 40 00 Error: UNC at LBA = 0x15d509ac2 = 5860530882
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
42 00 00 08 ee 00 01 5d 50 9a c2 40 00 7d+18:48:28.628 READ VERIFY SECTOR(S) EXT
42 00 00 00 01 00 01 5d 50 57 27 40 00 7d+18:48:28.536 READ VERIFY SECTOR(S) EXT
61 00 01 00 00 00 01 5d 50 57 27 40 00 7d+18:48:28.535 WRITE FPDMA QUEUED
42 00 00 00 17 00 01 5d 50 57 69 40 00 7d+18:48:28.505 READ VERIFY SECTOR(S) EXT
61 00 17 00 00 00 01 5d 50 57 69 40 00 7d+18:48:28.505 WRITE FPDMA QUEUED
Error 82 [9] occurred at disk power-on lifetime: 20162 hours (840 days + 2 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
40 -- 51 08 ef 00 01 5d 50 9a c1 40 00 Error: UNC at LBA = 0x15d509ac1 = 5860530881
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
42 00 00 08 ef 00 01 5d 50 9a c1 40 00 7d+18:48:27.596 READ VERIFY SECTOR(S) EXT
42 00 00 00 01 00 01 5d 50 57 27 40 00 7d+18:48:27.514 READ VERIFY SECTOR(S) EXT
61 00 01 00 00 00 01 5d 50 57 27 40 00 7d+18:48:27.513 WRITE FPDMA QUEUED
42 00 00 00 17 00 01 5d 50 57 69 40 00 7d+18:48:27.484 READ VERIFY SECTOR(S) EXT
61 00 17 00 00 00 01 5d 50 57 69 40 00 7d+18:48:27.484 WRITE FPDMA QUEUED
Error 81 [8] occurred at disk power-on lifetime: 20162 hours (840 days + 2 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
40 -- 51 0f 78 00 01 5d 50 9a c0 40 00 Error: UNC at LBA = 0x15d509ac0 = 5860530880
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
42 00 00 0f 78 00 01 5d 50 94 38 40 00 7d+18:48:19.537 READ VERIFY SECTOR(S) EXT
42 00 00 00 01 00 01 5d 50 57 27 40 00 7d+18:48:19.517 READ VERIFY SECTOR(S) EXT
61 00 01 00 00 00 01 5d 50 57 27 40 00 7d+18:48:19.436 WRITE FPDMA QUEUED
42 00 00 00 17 00 01 5d 50 57 69 40 00 7d+18:48:19.370 READ VERIFY SECTOR(S) EXT
61 00 17 00 00 00 01 5d 50 57 69 40 00 7d+18:48:19.370 WRITE FPDMA QUEUED
SMART Extended Self-test Log Version: 1 (1 sectors)
Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
# 1 Extended offline Completed without error 00% 49850 -
# 2 Extended offline Completed without error 00% 49669 -
# 3 Extended offline Completed without error 00% 49501 -
# 4 Extended offline Completed without error 00% 49335 -
# 5 Extended offline Completed without error 00% 49166 -
# 6 Extended offline Completed without error 00% 49006 -
# 7 Extended offline Completed without error 00% 48832 -
# 8 Extended offline Completed without error 00% 48664 -
# 9 Extended offline Completed without error 00% 48496 -
#10 Extended offline Completed without error 00% 48328 -
#11 Extended offline Completed without error 00% 48161 -
#12 Extended offline Completed without error 00% 48001 -
#13 Extended offline Completed without error 00% 47826 -
#14 Extended offline Completed without error 00% 47658 -
#15 Extended offline Completed without error 00% 47490 -
#16 Extended offline Completed without error 00% 47322 -
#17 Extended offline Completed without error 00% 47154 -
#18 Extended offline Completed without error 00% 46996 -
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
SCT Status Version: 3
SCT Version (vendor specific): 258 (0x0102)
Device State: Active (0)
Current Temperature: 31 Celsius
Power Cycle Min/Max Temperature: 29/34 Celsius
Lifetime Min/Max Temperature: 2/36 Celsius
Under/Over Temperature Limit Count: 0/0
Vendor specific:
01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
SCT Temperature History Version: 2
Temperature Sampling Period: 1 minute
Temperature Logging Interval: 1 minute
Min/Max recommended Temperature: 0/60 Celsius
Min/Max Temperature Limit: -41/85 Celsius
Temperature History Size (Index): 478 (305)
SCT Error Recovery Control:
Read: 70 (7.0 seconds)
Write: 70 (7.0 seconds)
Device Statistics (GP/SMART Log 0x04) not supported
Pending Defects log (GP Log 0x0c) not supported
SATA Phy Event Counters (GP Log 0x11)
ID Size Value Description
0x0001 2 0 Command failed due to ICRC error
0x0002 2 0 R_ERR response for data FIS
0x0003 2 0 R_ERR response for device-to-host data FIS
0x0004 2 0 R_ERR response for host-to-device data FIS
0x0005 2 0 R_ERR response for non-data FIS
0x0006 2 0 R_ERR response for device-to-host non-data FIS
0x0007 2 0 R_ERR response for host-to-device non-data FIS
0x0008 2 0 Device-to-host non-data FIS retries
0x0009 2 0 Transition from drive PhyRdy to drive PhyNRdy
0x000a 2 1 Device-to-host register FISes sent due to a COMRESET
0x000b 2 0 CRC errors within host-to-device FIS
0x000f 2 0 R_ERR response for host-to-device data FIS, CRC
0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC
0x8000 4 3690730 Vendor specific
View Git Blame Copy Permalink