80486DX2-66/SMART-open-study
1
0
Fork 0
mirror of https://github.com/bsdhw/SMART.git synced 2025-05-31 16:21:41 +05:30
Code Issues Activity
Files
master
SMART-open-study/HDD/WDC/WD30/WD30EFRX-68EUZN0/ACCD391B379E
Andrey Ponomarenko 51569f7bd1 Update of reports (new: 1098, modified: 0)
2020-11-03 14:43:05 +03:00

371 lines
19 KiB
Plaintext
Raw Permalink Blame History

smartctl 7.1 2019-12-30 r5022 [FreeBSD 12.1-RELEASE amd64] (local build)
Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Model Family: Western Digital Red
Device Model: WDC WD30EFRX-68EUZN0
Serial Number: --
LU WWN Device Id: 5 0014ee ...
Firmware Version: 82.00A82
User Capacity: 3,000,592,982,016 bytes [3.00 TB]
Sector Sizes: 512 bytes logical, 4096 bytes physical
Rotation Rate: 5400 rpm
Device is: In smartctl database [for details use: -P show]
ATA Version is: ACS-2 (minor revision not indicated)
SATA Version is: SATA 3.0, 6.0 Gb/s (current: 6.0 Gb/s)
Local Time is: Fri Oct 30 19:03:58 2020 CDT
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
AAM feature is: Unavailable
APM feature is: Unavailable
Rd look-ahead is: Enabled
Write cache is: Enabled
DSN feature is: Unavailable
ATA Security is: Disabled, frozen [SEC2]
Wt Cache Reorder: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x00) Offline data collection activity
was never started.
Auto Offline Data Collection: Disabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: (40680) seconds.
Offline data collection
capabilities: (0x7b) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 2) minutes.
Extended self-test routine
recommended polling time: ( 408) minutes.
Conveyance self-test routine
recommended polling time: ( 5) minutes.
SCT capabilities: (0x703d) SCT Status supported.
SCT Error Recovery Control supported.
SCT Feature Control supported.
SCT Data Table supported.
SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE
1 Raw_Read_Error_Rate POSR-K 200 200 051 - 0
3 Spin_Up_Time POS--K 190 182 021 - 5500
4 Start_Stop_Count -O--CK 100 100 000 - 121
5 Reallocated_Sector_Ct PO--CK 200 200 140 - 0
7 Seek_Error_Rate -OSR-K 200 200 000 - 0
9 Power_On_Hours -O--CK 084 084 000 - 12068
10 Spin_Retry_Count -O--CK 100 100 000 - 0
11 Calibration_Retry_Count -O--CK 100 100 000 - 0
12 Power_Cycle_Count -O--CK 100 100 000 - 121
192 Power-Off_Retract_Count -O--CK 200 200 000 - 93
193 Load_Cycle_Count -O--CK 200 200 000 - 1176
194 Temperature_Celsius -O---K 120 107 000 - 30
196 Reallocated_Event_Count -O--CK 200 200 000 - 0
197 Current_Pending_Sector -O--CK 200 200 000 - 0
198 Offline_Uncorrectable ----CK 100 253 000 - 0
199 UDMA_CRC_Error_Count -O--CK 200 200 000 - 0
200 Multi_Zone_Error_Rate ---R-- 200 200 000 - 0
||||||_ K auto-keep
|||||__ C event count
||||___ R error rate
|||____ S speed/performance
||_____ O updated online
|______ P prefailure warning
General Purpose Log Directory Version 1
SMART Log Directory Version 1 [multi-sector log support]
Address Access R/W Size Description
0x00 GPL,SL R/O 1 Log Directory
0x01 SL R/O 1 Summary SMART error log
0x02 SL R/O 5 Comprehensive SMART error log
0x03 GPL R/O 6 Ext. Comprehensive SMART error log
0x04 GPL,SL R/O 8 Device Statistics log
0x06 SL R/O 1 SMART self-test log
0x07 GPL R/O 1 Extended self-test log
0x09 SL R/W 1 Selective self-test log
0x0c GPL R/O 2048 Pending Defects log
0x10 GPL R/O 1 NCQ Command Error log
0x11 GPL R/O 1 SATA Phy Event Counters log
0x21 GPL R/O 1 Write stream error log
0x22 GPL R/O 1 Read stream error log
0x80-0x9f GPL,SL R/W 16 Host vendor specific log
0xa0-0xa7 GPL,SL VS 16 Device vendor specific log
0xa8-0xb7 GPL,SL VS 1 Device vendor specific log
0xbd GPL,SL VS 1 Device vendor specific log
0xc0 GPL,SL VS 1 Device vendor specific log
0xc1 GPL VS 93 Device vendor specific log
0xe0 GPL,SL R/W 1 SCT Command/Status
0xe1 GPL,SL R/W 1 SCT Data Transfer
SMART Extended Comprehensive Error Log Version: 1 (6 sectors)
Device Error Count: 11
CR = Command Register
FEATR = Features Register
COUNT = Count (was: Sector Count) Register
LBA_48 = Upper bytes of LBA High/Mid/Low Registers ] ATA-8
LH = LBA High (was: Cylinder High) Register ] LBA
LM = LBA Mid (was: Cylinder Low) Register ] Register
LL = LBA Low (was: Sector Number) Register ]
DV = Device (was: Device/Head) Register
DC = Device Control Register
ER = Error register
ST = Status register
Powered_Up_Time is measured from power on, and printed as
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
SS=sec, and sss=millisec. It "wraps" after 49.710 days.
Error 11 [10] occurred at disk power-on lifetime: 11288 hours (470 days + 8 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
40 -- 51 00 00 00 00 00 00 08 00 40 00 Error: UNC at LBA = 0x00000800 = 2048
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
60 01 00 00 00 00 00 00 00 08 00 40 08 00:02:51.089 READ FPDMA QUEUED
60 01 00 00 f8 00 00 00 00 00 00 40 08 00:02:51.089 READ FPDMA QUEUED
60 00 08 00 98 00 00 08 00 29 48 40 08 00:02:43.329 READ FPDMA QUEUED
60 00 08 00 f0 00 00 08 00 29 d0 40 08 00:02:43.318 READ FPDMA QUEUED
60 00 08 00 90 00 00 08 00 29 38 40 08 00:02:43.309 READ FPDMA QUEUED
Error 10 [9] occurred at disk power-on lifetime: 11245 hours (468 days + 13 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
40 -- 51 00 00 00 00 00 00 08 00 40 00 Error: UNC at LBA = 0x00000800 = 2048
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
60 01 00 00 78 00 00 00 00 08 00 40 08 00:01:35.930 READ FPDMA QUEUED
60 01 00 00 70 00 00 00 00 00 00 40 08 00:01:35.930 READ FPDMA QUEUED
60 00 08 00 98 00 00 04 01 00 c8 40 08 00:01:28.117 READ FPDMA QUEUED
60 00 08 00 68 00 00 08 00 29 d0 40 08 00:01:28.116 READ FPDMA QUEUED
60 00 08 00 60 00 00 08 00 29 c8 40 08 00:01:28.113 READ FPDMA QUEUED
Error 9 [8] occurred at disk power-on lifetime: 10233 hours (426 days + 9 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
10 -- 51 00 00 00 01 36 16 d6 68 40 00 Error: IDNF at LBA = 0x13616d668 = 5202433640
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
61 01 00 00 00 00 01 36 16 d6 68 40 00 00:14:17.632 WRITE FPDMA QUEUED
61 01 00 00 08 00 01 36 16 d4 68 40 00 00:14:08.975 WRITE FPDMA QUEUED
61 01 00 00 00 00 01 36 16 d3 68 40 00 00:14:08.975 WRITE FPDMA QUEUED
61 00 08 00 00 00 01 36 11 c3 08 40 00 00:14:08.975 WRITE FPDMA QUEUED
61 00 08 00 08 00 01 3e 14 5b 88 40 00 00:14:08.974 WRITE FPDMA QUEUED
Error 8 [7] occurred at disk power-on lifetime: 10211 hours (425 days + 11 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
10 -- 51 00 00 00 01 24 11 c1 40 00 00 Error: IDNF at LBA = 0x12411c140 = 4900110656
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
61 00 18 00 00 00 01 24 11 c1 40 40 00 01:33:55.730 WRITE FPDMA QUEUED
ea 00 00 00 00 00 00 00 00 00 00 40 00 01:33:52.069 FLUSH CACHE EXT
61 00 08 00 18 00 01 5d 50 a1 20 40 00 01:33:52.068 WRITE FPDMA QUEUED
61 00 08 00 10 00 01 5d 50 9f 20 40 00 01:33:52.068 WRITE FPDMA QUEUED
61 00 08 00 08 00 00 00 10 0b 20 40 00 01:33:52.068 WRITE FPDMA QUEUED
Error 7 [6] occurred at disk power-on lifetime: 10211 hours (425 days + 11 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
10 -- 51 00 00 00 01 36 13 55 58 00 00 Error: IDNF at LBA = 0x136135558 = 5202203992
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
61 00 08 00 00 00 01 36 13 55 58 40 00 01:33:09.440 WRITE FPDMA QUEUED
ea 00 00 00 00 00 00 00 00 00 00 40 00 01:33:05.188 FLUSH CACHE EXT
61 00 08 00 18 00 01 5d 50 a1 d8 40 00 01:33:05.188 WRITE FPDMA QUEUED
61 00 08 00 10 00 01 5d 50 9f d8 40 00 01:33:05.188 WRITE FPDMA QUEUED
61 00 08 00 08 00 00 00 10 0b d8 40 00 01:33:05.188 WRITE FPDMA QUEUED
Error 6 [5] occurred at disk power-on lifetime: 10211 hours (425 days + 11 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
10 -- 51 00 00 00 01 24 10 93 70 00 00 Error: IDNF at LBA = 0x124109370 = 4900033392
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
61 00 10 00 00 00 01 24 10 93 70 40 00 01:17:26.746 WRITE FPDMA QUEUED
ea 00 00 00 00 00 00 00 00 00 00 40 00 01:17:23.647 FLUSH CACHE EXT
61 00 08 00 18 00 01 5d 50 a1 18 40 00 01:17:23.646 WRITE FPDMA QUEUED
61 00 08 00 10 00 01 5d 50 9f 18 40 00 01:17:23.646 WRITE FPDMA QUEUED
61 00 08 00 08 00 00 00 10 0b 18 40 00 01:17:23.646 WRITE FPDMA QUEUED
Error 5 [4] occurred at disk power-on lifetime: 10211 hours (425 days + 11 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
10 -- 51 00 00 00 01 32 11 bd e0 00 00 Error: IDNF at LBA = 0x13211bde0 = 5134990816
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
61 00 08 00 00 00 01 32 11 bd e0 40 00 01:16:41.223 WRITE FPDMA QUEUED
ea 00 00 00 00 00 00 00 00 00 00 40 00 01:16:36.233 FLUSH CACHE EXT
61 00 08 00 18 00 01 5d 50 a1 e0 40 00 01:16:36.233 WRITE FPDMA QUEUED
61 00 08 00 10 00 01 5d 50 9f e0 40 00 01:16:36.233 WRITE FPDMA QUEUED
61 00 08 00 08 00 00 00 10 0b e0 40 00 01:16:36.233 WRITE FPDMA QUEUED
Error 4 [3] occurred at disk power-on lifetime: 10211 hours (425 days + 11 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
10 -- 51 00 00 00 01 24 10 7d 58 00 00 Error: IDNF at LBA = 0x124107d58 = 4900027736
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
61 00 10 00 00 00 01 24 10 7d 58 40 00 01:03:08.700 WRITE FPDMA QUEUED
ea 00 00 00 00 00 00 00 00 00 00 40 00 01:03:04.846 FLUSH CACHE EXT
61 00 08 00 18 00 01 5d 50 a1 e8 40 00 01:03:04.846 WRITE FPDMA QUEUED
61 00 08 00 10 00 01 5d 50 9f e8 40 00 01:03:04.846 WRITE FPDMA QUEUED
61 00 08 00 08 00 00 00 10 0b e8 40 00 01:03:04.846 WRITE FPDMA QUEUED
SMART Extended Self-test Log Version: 1 (1 sectors)
Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
# 1 Extended offline Completed without error 00% 10493 -
# 2 Extended offline Completed without error 00% 10232 -
# 3 Extended offline Completed without error 00% 10219 -
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
SCT Status Version: 3
SCT Version (vendor specific): 258 (0x0102)
Device State: Active (0)
Current Temperature: 30 Celsius
Power Cycle Min/Max Temperature: 26/34 Celsius
Lifetime Min/Max Temperature: 2/43 Celsius
Under/Over Temperature Limit Count: 0/0
Vendor specific:
01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
SCT Temperature History Version: 2
Temperature Sampling Period: 1 minute
Temperature Logging Interval: 1 minute
Min/Max recommended Temperature: 0/60 Celsius
Min/Max Temperature Limit: -41/85 Celsius
Temperature History Size (Index): 478 (274)
SCT Error Recovery Control:
Read: 70 (7.0 seconds)
Write: 70 (7.0 seconds)
Device Statistics (GP Log 0x04)
Page Offset Size Value Flags Description
0x01 ===== = = === == General Statistics (rev 2) ==
0x01 0x008 4 121 --- Lifetime Power-On Resets
0x01 0x010 4 12068 --- Power-on Hours
0x01 0x018 6 43138942247 --- Logical Sectors Written
0x01 0x020 6 735989561 --- Number of Write Commands
0x01 0x028 6 47285106676 --- Logical Sectors Read
0x01 0x030 6 70587702 --- Number of Read Commands
0x03 ===== = = === == Rotating Media Statistics (rev 1) ==
0x03 0x008 4 11790 --- Spindle Motor Power-on Hours
0x03 0x010 4 11367 --- Head Flying Hours
0x03 0x018 4 1270 --- Head Load Events
0x03 0x020 4 0 --- Number of Reallocated Logical Sectors
0x03 0x028 4 56 --- Read Recovery Attempts
0x03 0x030 4 0 --- Number of Mechanical Start Failures
0x04 ===== = = === == General Errors Statistics (rev 1) ==
0x04 0x008 4 10 --- Number of Reported Uncorrectable Errors
0x04 0x010 4 917518 --- Resets Between Cmd Acceptance and Completion
0x05 ===== = = === == Temperature Statistics (rev 1) ==
0x05 0x008 1 30 --- Current Temperature
0x05 0x010 1 26 --- Average Short Term Temperature
0x05 0x018 1 29 --- Average Long Term Temperature
0x05 0x020 1 42 --- Highest Temperature
0x05 0x028 1 21 --- Lowest Temperature
0x05 0x030 1 39 --- Highest Average Short Term Temperature
0x05 0x038 1 24 --- Lowest Average Short Term Temperature
0x05 0x040 1 31 --- Highest Average Long Term Temperature
0x05 0x048 1 28 --- Lowest Average Long Term Temperature
0x05 0x050 4 0 --- Time in Over-Temperature
0x05 0x058 1 60 --- Specified Maximum Operating Temperature
0x05 0x060 4 0 --- Time in Under-Temperature
0x05 0x068 1 0 --- Specified Minimum Operating Temperature
0x06 ===== = = === == Transport Statistics (rev 1) ==
0x06 0x008 4 761 --- Number of Hardware Resets
0x06 0x010 4 426365 --- Number of ASR Events
0x06 0x018 4 1 --- Number of Interface CRC Errors
|||_ C monitored condition met
||__ D supports DSN
|___ N normalized value
Pending Defects log (GP Log 0x0c)
No Defects Logged
SATA Phy Event Counters (GP Log 0x11)
ID Size Value Description
0x0001 2 0 Command failed due to ICRC error
0x0002 2 0 R_ERR response for data FIS
0x0003 2 0 R_ERR response for device-to-host data FIS
0x0004 2 0 R_ERR response for host-to-device data FIS
0x0005 2 0 R_ERR response for non-data FIS
0x0006 2 0 R_ERR response for device-to-host non-data FIS
0x0007 2 0 R_ERR response for host-to-device non-data FIS
0x0008 2 0 Device-to-host non-data FIS retries
0x0009 2 3 Transition from drive PhyRdy to drive PhyNRdy
0x000a 2 4 Device-to-host register FISes sent due to a COMRESET
0x000b 2 0 CRC errors within host-to-device FIS
0x000f 2 0 R_ERR response for host-to-device data FIS, CRC
0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC
0x8000 4 535880 Vendor specific
View Git Blame Copy Permalink