mirror of
https://github.com/bsdhw/SMART.git
synced 2025-05-31 16:21:41 +05:30
225 lines
11 KiB
Plaintext
225 lines
11 KiB
Plaintext
smartctl 7.2 2020-12-30 r5155 [FreeBSD 13.0-STABLE amd64] (local build)
|
|
Copyright (C) 2002-20, Bruce Allen, Christian Franke, www.smartmontools.org
|
|
|
|
=== START OF INFORMATION SECTION ===
|
|
Model Family: Western Digital Red
|
|
Device Model: WDC WD30EFRX-68EUZN0
|
|
Serial Number: --
|
|
LU WWN Device Id: 5 0014ee ...
|
|
Firmware Version: 82.00A82
|
|
User Capacity: 3,000,592,982,016 bytes [3.00 TB]
|
|
Sector Sizes: 512 bytes logical, 4096 bytes physical
|
|
Rotation Rate: 5400 rpm
|
|
Device is: In smartctl database [for details use: -P show]
|
|
ATA Version is: ACS-2 (minor revision not indicated)
|
|
SATA Version is: SATA 3.0, 6.0 Gb/s (current: 6.0 Gb/s)
|
|
Local Time is: Wed Oct 6 12:30:32 2021 UTC
|
|
SMART support is: Available - device has SMART capability.
|
|
SMART support is: Enabled
|
|
AAM feature is: Unavailable
|
|
APM feature is: Unavailable
|
|
Rd look-ahead is: Enabled
|
|
Write cache is: Enabled
|
|
DSN feature is: Unavailable
|
|
ATA Security is: Disabled, NOT FROZEN [SEC1]
|
|
Wt Cache Reorder: Enabled
|
|
|
|
=== START OF READ SMART DATA SECTION ===
|
|
SMART overall-health self-assessment test result: PASSED
|
|
|
|
General SMART Values:
|
|
Offline data collection status: (0x85) Offline data collection activity
|
|
was aborted by an interrupting command from host.
|
|
Auto Offline Data Collection: Enabled.
|
|
Self-test execution status: ( 0) The previous self-test routine completed
|
|
without error or no self-test has ever
|
|
been run.
|
|
Total time to complete Offline
|
|
data collection: (41040) seconds.
|
|
Offline data collection
|
|
capabilities: (0x7b) SMART execute Offline immediate.
|
|
Auto Offline data collection on/off support.
|
|
Suspend Offline collection upon new
|
|
command.
|
|
Offline surface scan supported.
|
|
Self-test supported.
|
|
Conveyance Self-test supported.
|
|
Selective Self-test supported.
|
|
SMART capabilities: (0x0003) Saves SMART data before entering
|
|
power-saving mode.
|
|
Supports SMART auto save timer.
|
|
Error logging capability: (0x01) Error logging supported.
|
|
General Purpose Logging supported.
|
|
Short self-test routine
|
|
recommended polling time: ( 2) minutes.
|
|
Extended self-test routine
|
|
recommended polling time: ( 412) minutes.
|
|
Conveyance self-test routine
|
|
recommended polling time: ( 5) minutes.
|
|
SCT capabilities: (0x703d) SCT Status supported.
|
|
SCT Error Recovery Control supported.
|
|
SCT Feature Control supported.
|
|
SCT Data Table supported.
|
|
|
|
SMART Attributes Data Structure revision number: 16
|
|
Vendor Specific SMART Attributes with Thresholds:
|
|
ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE
|
|
1 Raw_Read_Error_Rate POSR-K 200 200 051 - 0
|
|
3 Spin_Up_Time POS--K 177 175 021 - 6133
|
|
4 Start_Stop_Count -O--CK 100 100 000 - 60
|
|
5 Reallocated_Sector_Ct PO--CK 200 200 140 - 0
|
|
7 Seek_Error_Rate -OSR-K 200 200 000 - 0
|
|
9 Power_On_Hours -O--CK 070 070 000 - 22268
|
|
10 Spin_Retry_Count -O--CK 100 253 000 - 0
|
|
11 Calibration_Retry_Count -O--CK 100 253 000 - 0
|
|
12 Power_Cycle_Count -O--CK 100 100 000 - 60
|
|
192 Power-Off_Retract_Count -O--CK 200 200 000 - 58
|
|
193 Load_Cycle_Count -O--CK 190 190 000 - 30021
|
|
194 Temperature_Celsius -O---K 121 112 000 - 29
|
|
196 Reallocated_Event_Count -O--CK 200 200 000 - 0
|
|
197 Current_Pending_Sector -O--CK 200 200 000 - 0
|
|
198 Offline_Uncorrectable ----CK 200 200 000 - 0
|
|
199 UDMA_CRC_Error_Count -O--CK 200 200 000 - 0
|
|
200 Multi_Zone_Error_Rate ---R-- 200 200 000 - 0
|
|
||||||_ K auto-keep
|
|
|||||__ C event count
|
|
||||___ R error rate
|
|
|||____ S speed/performance
|
|
||_____ O updated online
|
|
|______ P prefailure warning
|
|
|
|
General Purpose Log Directory Version 1
|
|
SMART Log Directory Version 1 [multi-sector log support]
|
|
Address Access R/W Size Description
|
|
0x00 GPL,SL R/O 1 Log Directory
|
|
0x01 SL R/O 1 Summary SMART error log
|
|
0x02 SL R/O 5 Comprehensive SMART error log
|
|
0x03 GPL R/O 6 Ext. Comprehensive SMART error log
|
|
0x06 SL R/O 1 SMART self-test log
|
|
0x07 GPL R/O 1 Extended self-test log
|
|
0x09 SL R/W 1 Selective self-test log
|
|
0x10 GPL R/O 1 NCQ Command Error log
|
|
0x11 GPL R/O 1 SATA Phy Event Counters log
|
|
0x21 GPL R/O 1 Write stream error log
|
|
0x22 GPL R/O 1 Read stream error log
|
|
0x80-0x9f GPL,SL R/W 16 Host vendor specific log
|
|
0xa0-0xa7 GPL,SL VS 16 Device vendor specific log
|
|
0xa8-0xb7 GPL,SL VS 1 Device vendor specific log
|
|
0xbd GPL,SL VS 1 Device vendor specific log
|
|
0xc0 GPL,SL VS 1 Device vendor specific log
|
|
0xc1 GPL VS 93 Device vendor specific log
|
|
0xe0 GPL,SL R/W 1 SCT Command/Status
|
|
0xe1 GPL,SL R/W 1 SCT Data Transfer
|
|
|
|
SMART Extended Comprehensive Error Log Version: 1 (6 sectors)
|
|
Device Error Count: 1
|
|
CR = Command Register
|
|
FEATR = Features Register
|
|
COUNT = Count (was: Sector Count) Register
|
|
LBA_48 = Upper bytes of LBA High/Mid/Low Registers ] ATA-8
|
|
LH = LBA High (was: Cylinder High) Register ] LBA
|
|
LM = LBA Mid (was: Cylinder Low) Register ] Register
|
|
LL = LBA Low (was: Sector Number) Register ]
|
|
DV = Device (was: Device/Head) Register
|
|
DC = Device Control Register
|
|
ER = Error register
|
|
ST = Status register
|
|
Powered_Up_Time is measured from power on, and printed as
|
|
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
|
|
SS=sec, and sss=millisec. It "wraps" after 49.710 days.
|
|
|
|
Error 1 [0] occurred at disk power-on lifetime: 12628 hours (526 days + 4 hours)
|
|
When the command that caused the error occurred, the device was active or idle.
|
|
|
|
After command completion occurred, registers were:
|
|
ER -- ST COUNT LBA_48 LH LM LL DV DC
|
|
-- -- -- == -- == == == -- -- -- -- --
|
|
10 -- 51 00 00 00 00 05 db 66 38 40 00 Error: IDNF at LBA = 0x05db6638 = 98264632
|
|
|
|
Commands leading to the command that caused the error were:
|
|
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
|
|
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
|
|
61 01 00 00 38 00 00 05 db 6d 38 40 00 3d+04:29:16.810 WRITE FPDMA QUEUED
|
|
61 01 00 00 30 00 00 05 db 6c 38 40 00 3d+04:29:16.810 WRITE FPDMA QUEUED
|
|
61 01 00 00 28 00 00 05 db 6b 38 40 00 3d+04:29:16.810 WRITE FPDMA QUEUED
|
|
61 01 00 00 20 00 00 05 db 6a 38 40 00 3d+04:29:16.810 WRITE FPDMA QUEUED
|
|
61 01 00 00 18 00 00 05 db 69 38 40 00 3d+04:29:16.810 WRITE FPDMA QUEUED
|
|
|
|
SMART Extended Self-test Log Version: 1 (1 sectors)
|
|
Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
|
|
# 1 Short offline Completed without error 00% 22257 -
|
|
# 2 Short offline Completed without error 00% 22233 -
|
|
# 3 Short offline Completed without error 00% 22209 -
|
|
# 4 Short offline Completed without error 00% 22185 -
|
|
# 5 Extended offline Completed without error 00% 22170 -
|
|
# 6 Short offline Completed without error 00% 22161 -
|
|
# 7 Short offline Completed without error 00% 22137 -
|
|
# 8 Short offline Completed without error 00% 22113 -
|
|
# 9 Short offline Completed without error 00% 22089 -
|
|
#10 Short offline Completed without error 00% 22065 -
|
|
#11 Short offline Completed without error 00% 22041 -
|
|
#12 Short offline Completed without error 00% 22017 -
|
|
#13 Extended offline Completed without error 00% 22002 -
|
|
#14 Short offline Completed without error 00% 21993 -
|
|
#15 Short offline Completed without error 00% 21969 -
|
|
#16 Short offline Completed without error 00% 21945 -
|
|
#17 Short offline Completed without error 00% 21921 -
|
|
#18 Short offline Completed without error 00% 21898 -
|
|
|
|
SMART Selective self-test log data structure revision number 1
|
|
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
|
|
1 0 0 Not_testing
|
|
2 0 0 Not_testing
|
|
3 0 0 Not_testing
|
|
4 0 0 Not_testing
|
|
5 0 0 Not_testing
|
|
Selective self-test flags (0x0):
|
|
After scanning selected spans, do NOT read-scan remainder of disk.
|
|
If Selective self-test is pending on power-up, resume after 0 minute delay.
|
|
|
|
SCT Status Version: 3
|
|
SCT Version (vendor specific): 258 (0x0102)
|
|
Device State: Active (0)
|
|
Current Temperature: 29 Celsius
|
|
Power Cycle Min/Max Temperature: 28/36 Celsius
|
|
Lifetime Min/Max Temperature: 2/38 Celsius
|
|
Under/Over Temperature Limit Count: 0/0
|
|
Vendor specific:
|
|
01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
|
|
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
|
|
|
|
SCT Temperature History Version: 2
|
|
Temperature Sampling Period: 1 minute
|
|
Temperature Logging Interval: 1 minute
|
|
Min/Max recommended Temperature: 0/60 Celsius
|
|
Min/Max Temperature Limit: -41/85 Celsius
|
|
Temperature History Size (Index): 478 (154)
|
|
|
|
SCT Error Recovery Control:
|
|
Read: 70 (7.0 seconds)
|
|
Write: 70 (7.0 seconds)
|
|
|
|
Device Statistics (GP/SMART Log 0x04) not supported
|
|
|
|
Pending Defects log (GP Log 0x0c) not supported
|
|
|
|
SATA Phy Event Counters (GP Log 0x11)
|
|
ID Size Value Description
|
|
0x0001 2 0 Command failed due to ICRC error
|
|
0x0002 2 0 R_ERR response for data FIS
|
|
0x0003 2 0 R_ERR response for device-to-host data FIS
|
|
0x0004 2 0 R_ERR response for host-to-device data FIS
|
|
0x0005 2 0 R_ERR response for non-data FIS
|
|
0x0006 2 0 R_ERR response for device-to-host non-data FIS
|
|
0x0007 2 0 R_ERR response for host-to-device non-data FIS
|
|
0x0008 2 0 Device-to-host non-data FIS retries
|
|
0x0009 2 0 Transition from drive PhyRdy to drive PhyNRdy
|
|
0x000a 2 1 Device-to-host register FISes sent due to a COMRESET
|
|
0x000b 2 0 CRC errors within host-to-device FIS
|
|
0x000f 2 0 R_ERR response for host-to-device data FIS, CRC
|
|
0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC
|
|
0x8000 4 1562137 Vendor specific
|
|
|
|
|
|
|