80486DX2-66/SMART-open-study
1
0
Fork 0
mirror of https://github.com/bsdhw/SMART.git synced 2025-05-31 16:21:41 +05:30
Code Issues Activity
Files
master
SMART-open-study/HDD/WDC/WD30/WD30EFRX-68EUZN0/DC59A2C620AC
Andrey Ponomarenko 51569f7bd1 Update of reports (new: 1098, modified: 0)
2020-11-03 14:43:05 +03:00

372 lines
19 KiB
Plaintext
Raw Permalink Blame History

smartctl 7.1 2019-12-30 r5022 [FreeBSD 12.1-RELEASE amd64] (local build)
Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Model Family: Western Digital Red
Device Model: WDC WD30EFRX-68EUZN0
Serial Number: --
LU WWN Device Id: 5 0014ee ...
Firmware Version: 82.00A82
User Capacity: 3,000,592,982,016 bytes [3.00 TB]
Sector Sizes: 512 bytes logical, 4096 bytes physical
Rotation Rate: 5400 rpm
Device is: In smartctl database [for details use: -P show]
ATA Version is: ACS-2 (minor revision not indicated)
SATA Version is: SATA 3.0, 6.0 Gb/s (current: 6.0 Gb/s)
Local Time is: Fri Oct 30 19:03:56 2020 CDT
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
AAM feature is: Unavailable
APM feature is: Unavailable
Rd look-ahead is: Enabled
Write cache is: Enabled
DSN feature is: Unavailable
ATA Security is: Disabled, frozen [SEC2]
Wt Cache Reorder: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x00) Offline data collection activity
was never started.
Auto Offline Data Collection: Disabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: (39120) seconds.
Offline data collection
capabilities: (0x7b) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 2) minutes.
Extended self-test routine
recommended polling time: ( 393) minutes.
Conveyance self-test routine
recommended polling time: ( 5) minutes.
SCT capabilities: (0x703d) SCT Status supported.
SCT Error Recovery Control supported.
SCT Feature Control supported.
SCT Data Table supported.
SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE
1 Raw_Read_Error_Rate POSR-K 200 200 051 - 0
3 Spin_Up_Time POS--K 186 177 021 - 5666
4 Start_Stop_Count -O--CK 100 100 000 - 122
5 Reallocated_Sector_Ct PO--CK 200 200 140 - 0
7 Seek_Error_Rate -OSR-K 200 200 000 - 0
9 Power_On_Hours -O--CK 084 084 000 - 12066
10 Spin_Retry_Count -O--CK 100 100 000 - 0
11 Calibration_Retry_Count -O--CK 100 100 000 - 0
12 Power_Cycle_Count -O--CK 100 100 000 - 122
192 Power-Off_Retract_Count -O--CK 200 200 000 - 92
193 Load_Cycle_Count -O--CK 200 200 000 - 1182
194 Temperature_Celsius -O---K 119 106 000 - 31
196 Reallocated_Event_Count -O--CK 200 200 000 - 0
197 Current_Pending_Sector -O--CK 200 200 000 - 0
198 Offline_Uncorrectable ----CK 100 253 000 - 0
199 UDMA_CRC_Error_Count -O--CK 200 200 000 - 0
200 Multi_Zone_Error_Rate ---R-- 200 200 000 - 0
||||||_ K auto-keep
|||||__ C event count
||||___ R error rate
|||____ S speed/performance
||_____ O updated online
|______ P prefailure warning
General Purpose Log Directory Version 1
SMART Log Directory Version 1 [multi-sector log support]
Address Access R/W Size Description
0x00 GPL,SL R/O 1 Log Directory
0x01 SL R/O 1 Summary SMART error log
0x02 SL R/O 5 Comprehensive SMART error log
0x03 GPL R/O 6 Ext. Comprehensive SMART error log
0x04 GPL,SL R/O 8 Device Statistics log
0x06 SL R/O 1 SMART self-test log
0x07 GPL R/O 1 Extended self-test log
0x09 SL R/W 1 Selective self-test log
0x0c GPL R/O 2048 Pending Defects log
0x10 GPL R/O 1 NCQ Command Error log
0x11 GPL R/O 1 SATA Phy Event Counters log
0x21 GPL R/O 1 Write stream error log
0x22 GPL R/O 1 Read stream error log
0x80-0x9f GPL,SL R/W 16 Host vendor specific log
0xa0-0xa7 GPL,SL VS 16 Device vendor specific log
0xa8-0xb7 GPL,SL VS 1 Device vendor specific log
0xbd GPL,SL VS 1 Device vendor specific log
0xc0 GPL,SL VS 1 Device vendor specific log
0xc1 GPL VS 93 Device vendor specific log
0xe0 GPL,SL R/W 1 SCT Command/Status
0xe1 GPL,SL R/W 1 SCT Data Transfer
SMART Extended Comprehensive Error Log Version: 1 (6 sectors)
Device Error Count: 19
CR = Command Register
FEATR = Features Register
COUNT = Count (was: Sector Count) Register
LBA_48 = Upper bytes of LBA High/Mid/Low Registers ] ATA-8
LH = LBA High (was: Cylinder High) Register ] LBA
LM = LBA Mid (was: Cylinder Low) Register ] Register
LL = LBA Low (was: Sector Number) Register ]
DV = Device (was: Device/Head) Register
DC = Device Control Register
ER = Error register
ST = Status register
Powered_Up_Time is measured from power on, and printed as
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
SS=sec, and sss=millisec. It "wraps" after 49.710 days.
Error 19 [18] occurred at disk power-on lifetime: 11287 hours (470 days + 7 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
40 -- 51 00 00 00 00 00 00 08 00 40 00 Error: UNC at LBA = 0x00000800 = 2048
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
60 01 00 00 90 00 00 00 00 08 00 40 08 00:02:50.817 READ FPDMA QUEUED
60 01 00 00 88 00 00 00 00 00 00 40 08 00:02:50.817 READ FPDMA QUEUED
60 00 08 00 d8 00 00 02 00 29 30 40 08 00:02:43.038 READ FPDMA QUEUED
60 00 08 00 c8 00 00 04 01 00 c8 40 08 00:02:43.029 READ FPDMA QUEUED
60 00 08 00 28 00 00 02 00 2a a8 40 08 00:02:43.023 READ FPDMA QUEUED
Error 18 [17] occurred at disk power-on lifetime: 11244 hours (468 days + 12 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
40 -- 51 00 00 00 00 00 00 08 00 40 00 Error: UNC at LBA = 0x00000800 = 2048
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
60 01 00 00 b8 00 00 00 00 08 00 40 08 00:01:35.676 READ FPDMA QUEUED
60 01 00 00 b0 00 00 00 00 00 00 40 08 00:01:35.676 READ FPDMA QUEUED
60 00 08 00 30 00 00 08 00 29 48 40 08 00:01:27.880 READ FPDMA QUEUED
60 00 08 00 28 00 00 08 00 29 38 40 08 00:01:27.869 READ FPDMA QUEUED
60 00 08 00 20 00 00 02 00 29 30 40 08 00:01:27.869 READ FPDMA QUEUED
Error 17 [16] occurred at disk power-on lifetime: 10485 hours (436 days + 21 hours)
When the command that caused the error occurred, the device was doing SMART Offline or Self-test.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
40 -- 51 00 00 00 00 00 00 00 00 40 00 Error: UNC at LBA = 0x00000000 = 0
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
60 01 00 00 00 00 00 00 00 00 00 40 00 12:45:27.592 READ FPDMA QUEUED
60 01 00 00 00 00 00 00 10 08 00 40 00 12:45:17.508 READ FPDMA QUEUED
60 01 00 00 08 00 00 00 00 08 00 40 00 12:45:17.508 READ FPDMA QUEUED
60 01 00 00 00 00 00 00 00 00 00 40 00 12:45:17.508 READ FPDMA QUEUED
60 01 00 00 00 00 00 00 10 08 00 40 00 12:45:17.439 READ FPDMA QUEUED
Error 16 [15] occurred at disk power-on lifetime: 10472 hours (436 days + 8 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
10 -- 51 00 00 00 01 36 20 71 08 00 00 Error: IDNF at LBA = 0x136207108 = 5203063048
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
61 00 08 00 00 00 01 36 20 71 08 40 00 00:33:50.608 WRITE FPDMA QUEUED
ea 00 00 00 00 00 00 00 00 00 00 40 00 00:33:46.617 FLUSH CACHE EXT
61 00 08 00 18 00 01 5d 50 a1 50 40 00 00:33:46.617 WRITE FPDMA QUEUED
61 00 08 00 10 00 01 5d 50 9f 50 40 00 00:33:46.617 WRITE FPDMA QUEUED
61 00 08 00 08 00 00 00 10 0b 50 40 00 00:33:46.617 WRITE FPDMA QUEUED
Error 15 [14] occurred at disk power-on lifetime: 10233 hours (426 days + 9 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
10 -- 51 00 00 00 00 de 19 dc d8 40 00 Error: IDNF at LBA = 0xde19dcd8 = 3726236888
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
61 07 b0 00 00 00 00 de 19 dc d8 40 00 00:21:23.702 WRITE FPDMA QUEUED
61 07 d0 00 08 00 00 de 19 d5 08 40 00 00:21:23.700 WRITE FPDMA QUEUED
61 01 00 00 00 00 00 de 19 5f 18 40 00 00:21:23.699 WRITE FPDMA QUEUED
61 01 00 00 10 00 00 de 19 5b f0 40 00 00:21:23.698 WRITE FPDMA QUEUED
61 02 00 00 08 00 00 de 19 59 80 40 00 00:21:23.698 WRITE FPDMA QUEUED
Error 14 [13] occurred at disk power-on lifetime: 10232 hours (426 days + 8 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
10 -- 51 00 00 00 01 24 14 65 78 40 00 Error: IDNF at LBA = 0x124146578 = 4900283768
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
61 07 d0 00 08 00 01 24 14 65 78 40 00 00:17:08.913 WRITE FPDMA QUEUED
61 07 80 00 00 00 01 24 14 5d f8 40 00 00:17:08.911 WRITE FPDMA QUEUED
61 07 b0 00 08 00 01 24 14 56 48 40 00 00:17:08.908 WRITE FPDMA QUEUED
61 04 d0 00 00 00 01 24 14 51 00 40 00 00:17:08.901 WRITE FPDMA QUEUED
61 07 c8 00 08 00 01 24 14 49 38 40 00 00:17:08.890 WRITE FPDMA QUEUED
Error 13 [12] occurred at disk power-on lifetime: 10232 hours (426 days + 8 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
10 -- 51 00 00 00 01 36 17 6a 78 40 00 Error: IDNF at LBA = 0x136176a78 = 5202471544
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
61 08 00 00 00 00 01 36 17 6a 78 40 00 00:14:31.510 WRITE FPDMA QUEUED
61 08 00 00 08 00 01 36 17 62 78 40 00 00:14:31.485 WRITE FPDMA QUEUED
61 08 00 00 00 00 01 36 17 5a 78 40 00 00:14:31.484 WRITE FPDMA QUEUED
61 08 00 00 08 00 01 36 17 52 78 40 00 00:14:31.481 WRITE FPDMA QUEUED
61 08 00 00 00 00 01 36 17 4a 78 40 00 00:14:31.479 WRITE FPDMA QUEUED
Error 12 [11] occurred at disk power-on lifetime: 10232 hours (426 days + 8 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
40 -- 51 00 00 00 00 cc 25 96 a8 40 00 Error: WP at LBA = 0xcc2596a8 = 3425015464
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
61 08 00 00 10 00 01 36 16 63 e8 40 00 00:14:07.616 WRITE FPDMA QUEUED
61 08 00 00 10 00 01 36 16 5b e8 40 00 00:14:07.613 WRITE FPDMA QUEUED
61 08 00 00 10 00 01 36 16 53 e8 40 00 00:14:07.611 WRITE FPDMA QUEUED
61 05 00 00 10 00 01 36 16 47 d0 40 00 00:14:07.609 WRITE FPDMA QUEUED
61 01 00 00 10 00 01 36 16 3e c8 40 00 00:14:07.608 WRITE FPDMA QUEUED
SMART Extended Self-test Log Version: 1 (1 sectors)
Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
# 1 Extended offline Completed without error 00% 10492 -
# 2 Extended offline Completed without error 00% 10229 -
# 3 Extended offline Interrupted (host reset) 90% 10211 -
# 4 Short offline Completed without error 00% 10211 -
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
SCT Status Version: 3
SCT Version (vendor specific): 258 (0x0102)
Device State: Active (0)
Current Temperature: 31 Celsius
Power Cycle Min/Max Temperature: 27/35 Celsius
Lifetime Min/Max Temperature: 2/44 Celsius
Under/Over Temperature Limit Count: 0/0
Vendor specific:
01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
SCT Temperature History Version: 2
Temperature Sampling Period: 1 minute
Temperature Logging Interval: 1 minute
Min/Max recommended Temperature: 0/60 Celsius
Min/Max Temperature Limit: -41/85 Celsius
Temperature History Size (Index): 478 (254)
SCT Error Recovery Control:
Read: 70 (7.0 seconds)
Write: 70 (7.0 seconds)
Device Statistics (GP Log 0x04)
Page Offset Size Value Flags Description
0x01 ===== = = === == General Statistics (rev 2) ==
0x01 0x008 4 122 --- Lifetime Power-On Resets
0x01 0x010 4 12066 --- Power-on Hours
0x01 0x018 6 43138724687 --- Logical Sectors Written
0x01 0x020 6 737173259 --- Number of Write Commands
0x01 0x028 6 47951230455 --- Logical Sectors Read
0x01 0x030 6 87634354 --- Number of Read Commands
0x03 ===== = = === == Rotating Media Statistics (rev 1) ==
0x03 0x008 4 11789 --- Spindle Motor Power-on Hours
0x03 0x010 4 11362 --- Head Flying Hours
0x03 0x018 4 1275 --- Head Load Events
0x03 0x020 4 0 --- Number of Reallocated Logical Sectors
0x03 0x028 4 19 --- Read Recovery Attempts
0x03 0x030 4 0 --- Number of Mechanical Start Failures
0x04 ===== = = === == General Errors Statistics (rev 1) ==
0x04 0x008 4 19 --- Number of Reported Uncorrectable Errors
0x04 0x010 4 1376277 --- Resets Between Cmd Acceptance and Completion
0x05 ===== = = === == Temperature Statistics (rev 1) ==
0x05 0x008 1 30 --- Current Temperature
0x05 0x010 1 27 --- Average Short Term Temperature
0x05 0x018 1 30 --- Average Long Term Temperature
0x05 0x020 1 43 --- Highest Temperature
0x05 0x028 1 21 --- Lowest Temperature
0x05 0x030 1 40 --- Highest Average Short Term Temperature
0x05 0x038 1 23 --- Lowest Average Short Term Temperature
0x05 0x040 1 32 --- Highest Average Long Term Temperature
0x05 0x048 1 28 --- Lowest Average Long Term Temperature
0x05 0x050 4 0 --- Time in Over-Temperature
0x05 0x058 1 60 --- Specified Maximum Operating Temperature
0x05 0x060 4 0 --- Time in Under-Temperature
0x05 0x068 1 0 --- Specified Minimum Operating Temperature
0x06 ===== = = === == Transport Statistics (rev 1) ==
0x06 0x008 4 657 --- Number of Hardware Resets
0x06 0x010 4 495513 --- Number of ASR Events
0x06 0x018 4 0 --- Number of Interface CRC Errors
|||_ C monitored condition met
||__ D supports DSN
|___ N normalized value
Pending Defects log (GP Log 0x0c)
No Defects Logged
SATA Phy Event Counters (GP Log 0x11)
ID Size Value Description
0x0001 2 0 Command failed due to ICRC error
0x0002 2 0 R_ERR response for data FIS
0x0003 2 0 R_ERR response for device-to-host data FIS
0x0004 2 0 R_ERR response for host-to-device data FIS
0x0005 2 0 R_ERR response for non-data FIS
0x0006 2 0 R_ERR response for device-to-host non-data FIS
0x0007 2 0 R_ERR response for host-to-device non-data FIS
0x0008 2 0 Device-to-host non-data FIS retries
0x0009 2 3 Transition from drive PhyRdy to drive PhyNRdy
0x000a 2 4 Device-to-host register FISes sent due to a COMRESET
0x000b 2 0 CRC errors within host-to-device FIS
0x000f 2 0 R_ERR response for host-to-device data FIS, CRC
0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC
0x8000 4 535880 Vendor specific
View Git Blame Copy Permalink