80486DX2-66/SMART-open-study
1
0
Fork 0
mirror of https://github.com/bsdhw/SMART.git synced 2025-05-31 16:21:41 +05:30
Code Issues Activity
Files
master
SMART-open-study/HDD/WDC/WD3200/WD3200AAJS-22B4A0/603A754C9069
Andrey Ponomarenko d96e63400c Update of reports (new: 3084, modified: 0)
2021-05-18 23:01:35 +03:00

315 lines
16 KiB
Plaintext
Raw Permalink Blame History

smartctl 7.2 2020-12-30 r5155 [FreeBSD 12.2-RELEASE-p3 amd64] (local build)
Copyright (C) 2002-20, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Model Family: Western Digital Caviar Blue Serial ATA
Device Model: WDC WD3200AAJS-22B4A0
Serial Number: --
LU WWN Device Id: 5 0014ee ...
Firmware Version: 01.03A01
User Capacity: 320,072,933,376 bytes [320 GB]
Sector Size: 512 bytes logical/physical
Device is: In smartctl database [for details use: -P show]
ATA Version is: ATA8-ACS (minor revision not indicated)
SATA Version is: SATA 2.5, 3.0 Gb/s
Local Time is: Wed Feb 24 19:21:22 2021 GMT
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
AAM level is: 254 (maximum performance), recommended: 128
APM feature is: Unavailable
Rd look-ahead is: Enabled
Write cache is: Enabled
DSN feature is: Unavailable
ATA Security is: Disabled, frozen [SEC2]
Wt Cache Reorder: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x82) Offline data collection activity
was completed without error.
Auto Offline Data Collection: Enabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: ( 6000) seconds.
Offline data collection
capabilities: (0x7b) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 2) minutes.
Extended self-test routine
recommended polling time: ( 73) minutes.
Conveyance self-test routine
recommended polling time: ( 5) minutes.
SCT capabilities: (0x303f) SCT Status supported.
SCT Error Recovery Control supported.
SCT Feature Control supported.
SCT Data Table supported.
SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE
1 Raw_Read_Error_Rate POSR-K 200 200 051 - 34
3 Spin_Up_Time POS--K 152 149 021 - 3375
4 Start_Stop_Count -O--CK 092 092 000 - 8928
5 Reallocated_Sector_Ct PO--CK 200 200 140 - 0
7 Seek_Error_Rate -OSR-K 200 200 000 - 0
9 Power_On_Hours -O--CK 053 053 000 - 34783
10 Spin_Retry_Count -O--CK 100 100 000 - 0
11 Calibration_Retry_Count -O--CK 100 100 000 - 0
12 Power_Cycle_Count -O--CK 092 092 000 - 8767
192 Power-Off_Retract_Count -O--CK 200 200 000 - 492
193 Load_Cycle_Count -O--CK 198 198 000 - 8928
194 Temperature_Celsius -O---K 096 088 000 - 47
196 Reallocated_Event_Count -O--CK 200 200 000 - 0
197 Current_Pending_Sector -O--CK 200 200 000 - 0
198 Offline_Uncorrectable ----CK 200 200 000 - 0
199 UDMA_CRC_Error_Count -O--CK 200 200 000 - 37
200 Multi_Zone_Error_Rate ---R-- 200 200 000 - 0
||||||_ K auto-keep
|||||__ C event count
||||___ R error rate
|||____ S speed/performance
||_____ O updated online
|______ P prefailure warning
General Purpose Log Directory Version 1
SMART Log Directory Version 1 [multi-sector log support]
Address Access R/W Size Description
0x00 GPL,SL R/O 1 Log Directory
0x01 SL R/O 1 Summary SMART error log
0x02 SL R/O 5 Comprehensive SMART error log
0x03 GPL R/O 6 Ext. Comprehensive SMART error log
0x06 SL R/O 1 SMART self-test log
0x07 GPL R/O 1 Extended self-test log
0x09 SL R/W 1 Selective self-test log
0x10 GPL R/O 1 NCQ Command Error log
0x11 GPL R/O 1 SATA Phy Event Counters log
0x80-0x9f GPL,SL R/W 16 Host vendor specific log
0xa0-0xa7 GPL,SL VS 16 Device vendor specific log
0xa8-0xb7 GPL,SL VS 1 Device vendor specific log
0xc0 GPL,SL VS 1 Device vendor specific log
0xc1 GPL VS 24 Device vendor specific log
0xe0 GPL,SL R/W 1 SCT Command/Status
0xe1 GPL,SL R/W 1 SCT Data Transfer
SMART Extended Comprehensive Error Log Version: 1 (6 sectors)
Device Error Count: 80 (device log contains only the most recent 24 errors)
CR = Command Register
FEATR = Features Register
COUNT = Count (was: Sector Count) Register
LBA_48 = Upper bytes of LBA High/Mid/Low Registers ] ATA-8
LH = LBA High (was: Cylinder High) Register ] LBA
LM = LBA Mid (was: Cylinder Low) Register ] Register
LL = LBA Low (was: Sector Number) Register ]
DV = Device (was: Device/Head) Register
DC = Device Control Register
ER = Error register
ST = Status register
Powered_Up_Time is measured from power on, and printed as
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
SS=sec, and sss=millisec. It "wraps" after 49.710 days.
Error 80 [7] occurred at disk power-on lifetime: 28378 hours (1182 days + 10 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
40 -- 51 00 08 00 0f 95 00 3a d0 e0 00 Error: UNC 8 sectors at LBA = 0xf95003ad0 = 66924329680
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
25 00 00 00 08 00 00 0f 3a 95 d0 e0 00 03:42:00.759 READ DMA EXT
35 00 00 00 08 00 00 0e b3 7c 38 e0 00 03:42:00.759 WRITE DMA EXT
25 00 00 00 08 00 00 0d 4f 8d 00 e0 00 03:42:00.746 READ DMA EXT
25 00 00 00 10 00 00 0a 00 c1 00 e0 00 03:42:00.743 READ DMA EXT
25 00 00 00 40 00 00 09 fa 06 88 e0 00 03:42:00.722 READ DMA EXT
Error 79 [6] occurred at disk power-on lifetime: 28378 hours (1182 days + 10 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
40 -- 51 00 40 00 0f 95 00 3a d0 e0 00 Error: UNC 64 sectors at LBA = 0xf95003ad0 = 66924329680
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
25 00 00 00 40 00 00 0f 3a 95 d0 e0 00 03:41:57.602 READ DMA EXT
25 00 00 00 10 00 00 0d 7d c2 28 e0 00 03:41:57.588 READ DMA EXT
25 00 00 00 40 00 00 00 3b c4 20 e0 00 03:41:57.571 READ DMA EXT
25 00 00 00 40 00 00 0f 3a 8e 90 e0 00 03:41:57.561 READ DMA EXT
25 00 00 00 10 00 00 0c 41 ae 20 e0 00 03:41:57.546 READ DMA EXT
Error 78 [5] occurred at disk power-on lifetime: 27120 hours (1130 days + 0 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
40 -- 51 00 08 00 0f 95 00 3a d0 e0 00 Error: UNC 8 sectors at LBA = 0xf95003ad0 = 66924329680
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
25 00 00 00 08 00 00 0f 3a 95 d0 e0 00 03:10:55.450 READ DMA EXT
25 00 00 00 27 00 00 02 aa 7e f8 e0 00 03:10:55.443 READ DMA EXT
25 00 00 00 40 00 00 00 d9 b0 e2 e0 00 03:10:55.429 READ DMA EXT
25 00 00 00 02 00 00 06 64 b4 58 e0 00 03:10:55.416 READ DMA EXT
25 00 00 00 08 00 00 02 aa 7e f0 e0 00 03:10:55.402 READ DMA EXT
Error 77 [4] occurred at disk power-on lifetime: 27120 hours (1130 days + 0 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
40 -- 51 00 60 00 0f 95 00 3a 80 e0 00 Error: UNC 96 sectors at LBA = 0xf95003a80 = 66924329600
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
25 00 00 00 60 00 00 0f 3a 95 80 e0 00 03:10:51.637 READ DMA EXT
25 00 00 00 08 00 00 08 be f8 40 e0 00 03:10:51.620 READ DMA EXT
35 00 00 00 20 00 00 07 d3 b4 e0 e0 00 03:10:51.619 WRITE DMA EXT
25 00 00 00 29 00 00 02 aa 7e 10 e0 00 03:10:51.611 READ DMA EXT
35 00 00 00 40 00 00 01 20 b9 50 e0 00 03:10:51.611 WRITE DMA EXT
Error 76 [3] occurred at disk power-on lifetime: 26658 hours (1110 days + 18 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
40 -- 51 00 08 00 0f 95 00 3a d0 e0 00 Error: UNC 8 sectors at LBA = 0xf95003ad0 = 66924329680
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
25 00 00 00 08 00 00 0f 3a 95 d0 e0 00 00:27:02.581 READ DMA EXT
35 00 00 00 08 00 00 0b 25 7b 28 e0 00 00:27:02.581 WRITE DMA EXT
35 00 00 00 08 00 00 00 03 6b 70 e0 00 00:27:02.581 WRITE DMA EXT
ea 00 00 00 00 25 6c 47 00 00 00 e0 00 00:27:02.556 FLUSH CACHE EXT
35 00 00 00 08 00 00 0b 25 6c 40 e0 00 00:27:02.556 WRITE DMA EXT
Error 75 [2] occurred at disk power-on lifetime: 26658 hours (1110 days + 18 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
40 -- 51 00 08 00 0f 95 00 3a d0 e0 00 Error: UNC 8 sectors at LBA = 0xf95003ad0 = 66924329680
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
25 00 00 00 08 00 00 0f 3a 95 d0 e0 00 00:26:58.966 READ DMA EXT
25 00 00 00 08 00 00 00 03 f3 60 e0 00 00:26:58.966 READ DMA EXT
35 00 00 00 08 00 00 00 c7 11 70 e0 00 00:26:58.927 WRITE DMA EXT
35 00 00 00 08 00 00 0b 25 44 c0 e0 00 00:26:58.910 WRITE DMA EXT
35 00 00 00 10 00 00 0b 25 44 10 e0 00 00:26:58.909 WRITE DMA EXT
Error 74 [1] occurred at disk power-on lifetime: 26658 hours (1110 days + 18 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
40 -- 51 00 08 00 0f 95 00 3a d0 e0 00 Error: UNC 8 sectors at LBA = 0xf95003ad0 = 66924329680
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
25 00 00 00 08 00 00 0f 3a 95 d0 e0 00 00:26:55.841 READ DMA EXT
35 00 00 00 08 00 00 0b ae 24 b8 e0 00 00:26:55.841 WRITE DMA EXT
25 00 00 00 40 00 00 02 52 0b b8 e0 00 00:26:55.828 READ DMA EXT
25 00 00 00 08 00 00 00 08 cf 80 e0 00 00:26:55.812 READ DMA EXT
35 00 00 00 20 00 00 0a c0 82 60 e0 00 00:26:55.812 WRITE DMA EXT
Error 73 [0] occurred at disk power-on lifetime: 26658 hours (1110 days + 18 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
40 -- 51 00 80 00 0f 95 00 3a d0 e0 00 Error: UNC 128 sectors at LBA = 0xf95003ad0 = 66924329680
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
25 00 00 00 80 00 00 0f 3a 95 d0 e0 00 00:26:52.465 READ DMA EXT
35 00 00 00 08 00 00 0b 22 f7 78 e0 00 00:26:52.465 WRITE DMA EXT
35 00 00 00 08 00 00 05 f3 6f e0 e0 00 00:26:52.464 WRITE DMA EXT
35 00 00 00 08 00 00 00 05 4d 80 e0 00 00:26:52.464 WRITE DMA EXT
ea 00 00 00 00 22 eb 4f 00 00 00 e0 00 00:26:52.377 FLUSH CACHE EXT
SMART Extended Self-test Log Version: 1 (1 sectors)
Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
# 1 Extended offline Completed without error 00% 34520 -
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
SCT Status Version: 2
SCT Version (vendor specific): 258 (0x0102)
Device State: Active (0)
Current Temperature: 47 Celsius
Power Cycle Min/Max Temperature: 23/47 Celsius
Lifetime Min/Max Temperature: 25/55 Celsius
Under/Over Temperature Limit Count: 0/0
SCT Temperature History Version: 2
Temperature Sampling Period: 1 minute
Temperature Logging Interval: 1 minute
Min/Max recommended Temperature: 0/60 Celsius
Min/Max Temperature Limit: -41/85 Celsius
Temperature History Size (Index): 128 (47)
SCT Error Recovery Control:
Read: Disabled
Write: Disabled
Device Statistics (GP/SMART Log 0x04) not supported
Pending Defects log (GP Log 0x0c) not supported
SATA Phy Event Counters (GP Log 0x11)
ID Size Value Description
0x0001 2 0 Command failed due to ICRC error
0x0002 2 0 R_ERR response for data FIS
0x0003 2 0 R_ERR response for device-to-host data FIS
0x0004 2 0 R_ERR response for host-to-device data FIS
0x0005 2 0 R_ERR response for non-data FIS
0x0006 2 0 R_ERR response for device-to-host non-data FIS
0x0007 2 0 R_ERR response for host-to-device non-data FIS
0x000a 2 1 Device-to-host register FISes sent due to a COMRESET
0x8000 4 9834 Vendor specific
View Git Blame Copy Permalink