80486DX2-66/SMART-open-study
1
0
Fork 0
mirror of https://github.com/bsdhw/SMART.git synced 2025-05-31 16:21:41 +05:30
Code Issues Activity
Files
master
SMART-open-study/HDD/WDC/WD40/WD40EFAX-68JH4N1/E829D330D737
Andrey Ponomarenko 2a811b67c1 Update of reports (new: 6895, modified: 16)
2025-01-05 01:57:11 +03:00

382 lines
19 KiB
Plaintext
Raw Permalink Blame History

smartctl 7.4 2023-08-01 r5530 [FreeBSD 14.1-RELEASE-p3 amd64] (local build)
Copyright (C) 2002-23, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Model Family: Western Digital Red (SMR)
Device Model: WDC WD40EFAX-68JH4N1
Serial Number: --
LU WWN Device Id: 5 0014ee ...
Firmware Version: 83.00A83
User Capacity: 4,000,787,030,016 bytes [4.00 TB]
Sector Sizes: 512 bytes logical, 4096 bytes physical
Rotation Rate: 5400 rpm
Form Factor: 3.5 inches
TRIM Command: Available, deterministic, zeroed
Device is: In smartctl database 7.3/5528
ATA Version is: ACS-3 T13/2161-D revision 5
SATA Version is: SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s)
Local Time is: Sun Nov 24 11:32:48 2024 GMT
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
AAM feature is: Unavailable
APM feature is: Unavailable
Rd look-ahead is: Enabled
Write cache is: Enabled
DSN feature is: Unavailable
ATA Security is: Disabled, frozen [SEC2]
Wt Cache Reorder: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x00) Offline data collection activity
was never started.
Auto Offline Data Collection: Disabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: (46844) seconds.
Offline data collection
capabilities: (0x7b) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 2) minutes.
Extended self-test routine
recommended polling time: ( 504) minutes.
Conveyance self-test routine
recommended polling time: ( 2) minutes.
SCT capabilities: (0x3039) SCT Status supported.
SCT Error Recovery Control supported.
SCT Feature Control supported.
SCT Data Table supported.
SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE
1 Raw_Read_Error_Rate POSR-K 200 200 051 - 0
3 Spin_Up_Time POS--K 202 202 021 - 2883
4 Start_Stop_Count -O--CK 100 100 000 - 59
5 Reallocated_Sector_Ct PO--CK 200 200 140 - 0
7 Seek_Error_Rate -OSR-K 200 200 000 - 0
9 Power_On_Hours -O--CK 056 056 000 - 32798
10 Spin_Retry_Count -O--CK 100 253 000 - 0
11 Calibration_Retry_Count -O--CK 100 253 000 - 0
12 Power_Cycle_Count -O--CK 100 100 000 - 39
192 Power-Off_Retract_Count -O--CK 200 200 000 - 4
193 Load_Cycle_Count -O--CK 200 200 000 - 86
194 Temperature_Celsius -O---K 118 106 000 - 29
196 Reallocated_Event_Count -O--CK 200 200 000 - 0
197 Current_Pending_Sector -O--CK 200 200 000 - 0
198 Offline_Uncorrectable ----CK 100 253 000 - 0
199 UDMA_CRC_Error_Count -O--CK 200 200 000 - 0
200 Multi_Zone_Error_Rate ---R-- 100 253 000 - 0
||||||_ K auto-keep
|||||__ C event count
||||___ R error rate
|||____ S speed/performance
||_____ O updated online
|______ P prefailure warning
General Purpose Log Directory Version 1
SMART Log Directory Version 1 [multi-sector log support]
Address Access R/W Size Description
0x00 GPL,SL R/O 1 Log Directory
0x01 SL R/O 1 Summary SMART error log
0x02 SL R/O 5 Comprehensive SMART error log
0x03 GPL R/O 6 Ext. Comprehensive SMART error log
0x04 GPL R/O 256 Device Statistics log
0x04 SL R/O 8 Device Statistics log
0x06 SL R/O 1 SMART self-test log
0x07 GPL R/O 1 Extended self-test log
0x09 SL R/W 1 Selective self-test log
0x0c GPL R/O 2048 Pending Defects log
0x10 GPL R/O 1 NCQ Command Error log
0x11 GPL R/O 1 SATA Phy Event Counters log
0x24 GPL R/O 294 Current Device Internal Status Data log
0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log
0x80-0x9f GPL,SL R/W 16 Host vendor specific log
0xa0-0xa7 GPL,SL VS 16 Device vendor specific log
0xa8-0xb6 GPL,SL VS 1 Device vendor specific log
0xb7 GPL,SL VS 78 Device vendor specific log
0xb9 GPL,SL VS 4 Device vendor specific log
0xbd GPL,SL VS 1 Device vendor specific log
0xc0 GPL,SL VS 1 Device vendor specific log
0xc1 GPL VS 93 Device vendor specific log
0xe0 GPL,SL R/W 1 SCT Command/Status
0xe1 GPL,SL R/W 1 SCT Data Transfer
SMART Extended Comprehensive Error Log Version: 1 (6 sectors)
Device Error Count: 14
CR = Command Register
FEATR = Features Register
COUNT = Count (was: Sector Count) Register
LBA_48 = Upper bytes of LBA High/Mid/Low Registers ] ATA-8
LH = LBA High (was: Cylinder High) Register ] LBA
LM = LBA Mid (was: Cylinder Low) Register ] Register
LL = LBA Low (was: Sector Number) Register ]
DV = Device (was: Device/Head) Register
DC = Device Control Register
ER = Error register
ST = Status register
Powered_Up_Time is measured from power on, and printed as
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
SS=sec, and sss=millisec. It "wraps" after 49.710 days.
Error 14 [13] occurred at disk power-on lifetime: 24350 hours (1014 days + 14 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
10 -- 51 00 08 00 00 6c bb fc 48 e0 00 Error: IDNF 8 sectors at LBA = 0x6cbbfc48 = 1824259144
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
35 00 03 00 08 00 00 6c bb fc 48 e0 00 11d+14:38:55.985 WRITE DMA EXT
35 00 03 00 08 00 00 6c bb fc 30 e0 00 11d+14:38:55.977 WRITE DMA EXT
35 00 03 00 08 00 00 6c bb fc 18 e0 00 11d+14:38:55.975 WRITE DMA EXT
35 00 03 00 10 00 00 6c bb fc 00 e0 00 11d+14:38:55.974 WRITE DMA EXT
25 00 03 00 08 00 00 f0 ca 94 88 e0 00 11d+14:38:55.973 READ DMA EXT
Error 13 [12] occurred at disk power-on lifetime: 24350 hours (1014 days + 14 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
10 -- 51 00 10 00 00 6c ba 8f c8 e0 00 Error: IDNF 16 sectors at LBA = 0x6cba8fc8 = 1824165832
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
35 00 03 00 10 00 00 6c ba 8f c8 e0 00 11d+14:38:20.864 WRITE DMA EXT
25 00 03 00 08 00 00 f0 ca 90 50 e0 00 11d+14:38:20.863 READ DMA EXT
35 00 03 00 08 00 00 6c ba 8f b0 e0 00 11d+14:38:20.857 WRITE DMA EXT
35 00 03 00 08 00 00 6c ba 8f 98 e0 00 11d+14:38:20.855 WRITE DMA EXT
35 00 03 00 08 00 00 6c ba 8f 80 e0 00 11d+14:38:20.854 WRITE DMA EXT
Error 12 [11] occurred at disk power-on lifetime: 24350 hours (1014 days + 14 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
10 -- 51 00 08 00 00 6c b9 15 c8 e0 00 Error: IDNF 8 sectors at LBA = 0x6cb915c8 = 1824069064
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
35 00 03 00 08 00 00 6c b9 15 c8 e0 00 11d+14:37:49.616 WRITE DMA EXT
35 00 03 00 08 00 00 6c b9 15 b0 e0 00 11d+14:37:49.615 WRITE DMA EXT
35 00 03 00 08 00 00 6c b9 15 98 e0 00 11d+14:37:49.613 WRITE DMA EXT
35 00 03 00 10 00 00 6c b9 15 80 e0 00 11d+14:37:49.602 WRITE DMA EXT
35 00 03 00 08 00 00 6c b9 15 68 e0 00 11d+14:37:49.589 WRITE DMA EXT
Error 11 [10] occurred at disk power-on lifetime: 24350 hours (1014 days + 14 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
10 -- 51 00 08 00 00 6c b7 a3 00 e0 00 Error: IDNF 8 sectors at LBA = 0x6cb7a300 = 1823974144
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
35 00 03 00 08 00 00 6c b7 a3 00 e0 00 11d+14:37:05.250 WRITE DMA EXT
35 00 03 00 08 00 00 6c b7 a2 e8 e0 00 11d+14:37:05.244 WRITE DMA EXT
35 00 03 00 08 00 00 6c b7 a2 d0 e0 00 11d+14:37:05.243 WRITE DMA EXT
35 00 03 00 10 00 00 6c b7 a2 b8 e0 00 11d+14:37:05.241 WRITE DMA EXT
35 00 03 00 08 00 00 6c b7 a2 a0 e0 00 11d+14:37:05.238 WRITE DMA EXT
Error 10 [9] occurred at disk power-on lifetime: 24350 hours (1014 days + 14 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
10 -- 51 00 08 00 00 6c b6 66 68 e0 00 Error: IDNF 8 sectors at LBA = 0x6cb66668 = 1823893096
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
35 00 03 00 08 00 00 6c b6 66 68 e0 00 11d+14:36:35.822 WRITE DMA EXT
35 00 03 00 08 00 00 6c b6 66 50 e0 00 11d+14:36:35.815 WRITE DMA EXT
35 00 03 00 08 00 00 6c b6 66 38 e0 00 11d+14:36:35.813 WRITE DMA EXT
35 00 03 00 10 00 00 6c b6 66 20 e0 00 11d+14:36:35.811 WRITE DMA EXT
25 00 03 00 08 00 01 44 ab 31 d8 e0 00 11d+14:36:35.811 READ DMA EXT
Error 9 [8] occurred at disk power-on lifetime: 24350 hours (1014 days + 14 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
10 -- 51 00 58 00 00 9a dc 4b 90 e0 00 Error: IDNF 88 sectors at LBA = 0x9adc4b90 = 2598128528
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
35 00 03 00 58 00 00 9a dc 4b 90 e0 00 11d+14:32:41.308 WRITE DMA EXT
35 00 03 00 08 00 00 6c ac d2 78 e0 00 11d+14:32:41.306 WRITE DMA EXT
35 00 03 00 08 00 00 63 58 3d 58 e0 00 11d+14:32:41.300 WRITE DMA EXT
35 00 03 03 20 00 00 10 be cb c0 e0 00 11d+14:32:41.297 WRITE DMA EXT
35 00 03 01 40 00 00 85 9e c6 b0 e0 00 11d+14:32:41.294 WRITE DMA EXT
Error 8 [7] occurred at disk power-on lifetime: 24350 hours (1014 days + 14 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
10 -- 51 00 10 00 01 d1 c0 b4 10 e0 00 Error: IDNF 16 sectors at LBA = 0x1d1c0b410 = 7814034448
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
35 00 03 00 10 00 01 d1 c0 b4 10 e0 00 11d+14:32:18.213 WRITE DMA EXT
35 00 03 00 10 00 00 00 00 0a 10 e0 00 11d+14:32:17.542 WRITE DMA EXT
25 00 03 00 10 00 01 d1 c0 b6 10 e0 00 11d+14:32:16.830 READ DMA EXT
25 00 03 00 10 00 01 d1 c0 b4 10 e0 00 11d+14:32:16.809 READ DMA EXT
25 00 03 00 10 00 00 00 00 0a 10 e0 00 11d+14:32:16.797 READ DMA EXT
Error 7 [6] occurred at disk power-on lifetime: 24350 hours (1014 days + 14 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
10 -- 51 00 08 00 00 6c ab 90 a0 e0 00 Error: IDNF 8 sectors at LBA = 0x6cab90a0 = 1823183008
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
35 00 03 00 08 00 00 6c ab 90 a0 e0 00 11d+14:32:09.212 WRITE DMA EXT
35 00 03 00 10 00 00 6c ab 90 88 e0 00 11d+14:32:09.207 WRITE DMA EXT
25 00 03 00 08 00 01 1e ee 28 00 e0 00 11d+14:32:09.206 READ DMA EXT
35 00 03 00 08 00 00 6c ab 90 70 e0 00 11d+14:32:09.205 WRITE DMA EXT
35 00 03 00 08 00 00 6c ab 90 58 e0 00 11d+14:32:09.203 WRITE DMA EXT
SMART Extended Self-test Log Version: 1 (1 sectors)
Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
# 1 Short offline Completed without error 00% 9711 -
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
SCT Status Version: 3
SCT Version (vendor specific): 258 (0x0102)
Device State: Active (0)
Current Temperature: 29 Celsius
Power Cycle Min/Max Temperature: 23/34 Celsius
Lifetime Min/Max Temperature: 15/41 Celsius
Under/Over Temperature Limit Count: 0/0
Vendor specific:
01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
SCT Temperature History Version: 2
Temperature Sampling Period: 1 minute
Temperature Logging Interval: 1 minute
Min/Max recommended Temperature: 0/65 Celsius
Min/Max Temperature Limit: -41/85 Celsius
Temperature History Size (Index): 478 (451)
SCT Error Recovery Control:
Read: 70 (7.0 seconds)
Write: 70 (7.0 seconds)
Device Statistics (GP Log 0x04)
Page Offset Size Value Flags Description
0x01 ===== = = === == General Statistics (rev 1) ==
0x01 0x008 4 39 --- Lifetime Power-On Resets
0x01 0x010 4 32798 --- Power-on Hours
0x01 0x018 6 140549006038 --- Logical Sectors Written
0x01 0x020 6 2454158366 --- Number of Write Commands
0x01 0x028 6 54128282309 --- Logical Sectors Read
0x01 0x030 6 660856513 --- Number of Read Commands
0x01 0x038 6 2108683008 --- Date and Time TimeStamp
0x03 ===== = = === == Rotating Media Statistics (rev 1) ==
0x03 0x008 4 32635 --- Spindle Motor Power-on Hours
0x03 0x010 4 32568 --- Head Flying Hours
0x03 0x018 4 91 --- Head Load Events
0x03 0x020 4 0 --- Number of Reallocated Logical Sectors
0x03 0x028 4 1 --- Read Recovery Attempts
0x03 0x030 4 0 --- Number of Mechanical Start Failures
0x03 0x038 4 0 --- Number of Realloc. Candidate Logical Sectors
0x03 0x040 4 4 --- Number of High Priority Unload Events
0x04 ===== = = === == General Errors Statistics (rev 1) ==
0x04 0x008 4 14 --- Number of Reported Uncorrectable Errors
0x04 0x010 4 1 --- Resets Between Cmd Acceptance and Completion
0x05 ===== = = === == Temperature Statistics (rev 1) ==
0x05 0x008 1 29 --- Current Temperature
0x05 0x010 1 29 --- Average Short Term Temperature
0x05 0x018 1 30 --- Average Long Term Temperature
0x05 0x020 1 41 --- Highest Temperature
0x05 0x028 1 21 --- Lowest Temperature
0x05 0x030 1 40 --- Highest Average Short Term Temperature
0x05 0x038 1 26 --- Lowest Average Short Term Temperature
0x05 0x040 1 37 --- Highest Average Long Term Temperature
0x05 0x048 1 27 --- Lowest Average Long Term Temperature
0x05 0x050 4 0 --- Time in Over-Temperature
0x05 0x058 1 65 --- Specified Maximum Operating Temperature
0x05 0x060 4 0 --- Time in Under-Temperature
0x05 0x068 1 0 --- Specified Minimum Operating Temperature
0x06 ===== = = === == Transport Statistics (rev 1) ==
0x06 0x008 4 219 --- Number of Hardware Resets
0x06 0x010 4 180 --- Number of ASR Events
0x06 0x018 4 0 --- Number of Interface CRC Errors
0xff ===== = = === == Vendor Specific Statistics (rev 1) ==
0xff 0x008 7 0 --- Vendor Specific
0xff 0x010 7 0 --- Vendor Specific
0xff 0x018 7 0 --- Vendor Specific
|||_ C monitored condition met
||__ D supports DSN
|___ N normalized value
Pending Defects log (GP Log 0x0c)
No Defects Logged
SATA Phy Event Counters (GP Log 0x11)
ID Size Value Description
0x0001 2 0 Command failed due to ICRC error
0x0002 2 0 R_ERR response for data FIS
0x0003 2 0 R_ERR response for device-to-host data FIS
0x0004 2 0 R_ERR response for host-to-device data FIS
0x0005 2 0 R_ERR response for non-data FIS
0x0006 2 0 R_ERR response for device-to-host non-data FIS
0x0007 2 0 R_ERR response for host-to-device non-data FIS
0x0008 2 0 Device-to-host non-data FIS retries
0x0009 2 4 Transition from drive PhyRdy to drive PhyNRdy
0x000a 2 5 Device-to-host register FISes sent due to a COMRESET
0x000b 2 0 CRC errors within host-to-device FIS
0x000d 2 0 Non-CRC errors within host-to-device FIS
0x000f 2 0 R_ERR response for host-to-device data FIS, CRC
0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC
0x8000 4 9833588 Vendor specific
View Git Blame Copy Permalink