80486DX2-66/SMART-open-study
1
0
Fork 0
mirror of https://github.com/bsdhw/SMART.git synced 2025-05-31 16:21:41 +05:30
Code Issues Activity
Files
master
SMART-open-study/HDD/WDC/WD40/WD40EFRX-68N32N0/15B68A87DA28
Andrey Ponomarenko 8c515ea896 Update of reports (new: 35, modified: 3308)
2025-01-05 02:37:11 +03:00

372 lines
19 KiB
Plaintext
Raw Permalink Blame History

smartctl 7.3 2022-02-28 r5338 [FreeBSD 13.1-RELEASE amd64] (local build)
Copyright (C) 2002-22, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Model Family: Western Digital Red
Device Model: WDC WD40EFRX-68N32N0
Serial Number: --
LU WWN Device Id: 5 0014ee ...
Firmware Version: 82.00A82
User Capacity: 4,000,787,030,016 bytes [4.00 TB]
Sector Sizes: 512 bytes logical, 4096 bytes physical
Rotation Rate: 5400 rpm
Form Factor: 3.5 inches
Device is: In smartctl database 7.3/5319
ATA Version is: ACS-3 T13/2161-D revision 5
SATA Version is: SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s)
Local Time is: Tue Sep 19 13:04:17 2023 EDT
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
AAM feature is: Unavailable
APM feature is: Unavailable
Rd look-ahead is: Enabled
Write cache is: Enabled
DSN feature is: Unavailable
ATA Security is: Disabled, frozen [SEC2]
Wt Cache Reorder: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x00) Offline data collection activity
was never started.
Auto Offline Data Collection: Disabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: (45600) seconds.
Offline data collection
capabilities: (0x7b) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 2) minutes.
Extended self-test routine
recommended polling time: ( 483) minutes.
Conveyance self-test routine
recommended polling time: ( 5) minutes.
SCT capabilities: (0x303d) SCT Status supported.
SCT Error Recovery Control supported.
SCT Feature Control supported.
SCT Data Table supported.
SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE
1 Raw_Read_Error_Rate POSR-K 200 200 051 - 0
3 Spin_Up_Time POS--K 162 161 021 - 6891
4 Start_Stop_Count -O--CK 098 098 000 - 2756
5 Reallocated_Sector_Ct PO--CK 200 200 140 - 0
7 Seek_Error_Rate -OSR-K 200 200 000 - 0
9 Power_On_Hours -O--CK 030 030 000 - 51258
10 Spin_Retry_Count -O--CK 100 100 000 - 0
11 Calibration_Retry_Count -O--CK 100 100 000 - 0
12 Power_Cycle_Count -O--CK 100 100 000 - 323
192 Power-Off_Retract_Count -O--CK 200 200 000 - 166
193 Load_Cycle_Count -O--CK 199 199 000 - 5517
194 Temperature_Celsius -O---K 120 096 000 - 30
196 Reallocated_Event_Count -O--CK 200 200 000 - 0
197 Current_Pending_Sector -O--CK 200 200 000 - 0
198 Offline_Uncorrectable ----CK 100 253 000 - 0
199 UDMA_CRC_Error_Count -O--CK 200 198 000 - 22
200 Multi_Zone_Error_Rate ---R-- 100 253 000 - 0
||||||_ K auto-keep
|||||__ C event count
||||___ R error rate
|||____ S speed/performance
||_____ O updated online
|______ P prefailure warning
General Purpose Log Directory Version 1
SMART Log Directory Version 1 [multi-sector log support]
Address Access R/W Size Description
0x00 GPL,SL R/O 1 Log Directory
0x01 SL R/O 1 Summary SMART error log
0x02 SL R/O 5 Comprehensive SMART error log
0x03 GPL R/O 6 Ext. Comprehensive SMART error log
0x04 GPL,SL R/O 8 Device Statistics log
0x06 SL R/O 1 SMART self-test log
0x07 GPL R/O 1 Extended self-test log
0x09 SL R/W 1 Selective self-test log
0x10 GPL R/O 1 NCQ Command Error log
0x11 GPL R/O 1 SATA Phy Event Counters log
0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log
0x80-0x9f GPL,SL R/W 16 Host vendor specific log
0xa0-0xa7 GPL,SL VS 16 Device vendor specific log
0xa8-0xb6 GPL,SL VS 1 Device vendor specific log
0xb7 GPL,SL VS 56 Device vendor specific log
0xbd GPL,SL VS 1 Device vendor specific log
0xc0 GPL,SL VS 1 Device vendor specific log
0xc1 GPL VS 93 Device vendor specific log
0xe0 GPL,SL R/W 1 SCT Command/Status
0xe1 GPL,SL R/W 1 SCT Data Transfer
SMART Extended Comprehensive Error Log Version: 1 (6 sectors)
Device Error Count: 13
CR = Command Register
FEATR = Features Register
COUNT = Count (was: Sector Count) Register
LBA_48 = Upper bytes of LBA High/Mid/Low Registers ] ATA-8
LH = LBA High (was: Cylinder High) Register ] LBA
LM = LBA Mid (was: Cylinder Low) Register ] Register
LL = LBA Low (was: Sector Number) Register ]
DV = Device (was: Device/Head) Register
DC = Device Control Register
ER = Error register
ST = Status register
Powered_Up_Time is measured from power on, and printed as
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
SS=sec, and sss=millisec. It "wraps" after 49.710 days.
Error 13 [12] occurred at disk power-on lifetime: 440 hours (18 days + 8 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
10 -- 51 00 10 00 00 60 e7 40 b0 40 00 Error: IDNF 16 sectors at LBA = 0x60e740b0 = 1625768112
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
35 00 00 00 80 00 00 60 e7 02 b0 40 00 08:31:07.660 WRITE DMA EXT
35 00 00 00 80 00 00 60 e7 02 30 40 00 08:31:07.657 WRITE DMA EXT
35 00 00 00 80 00 00 60 e7 01 b0 40 00 08:31:07.654 WRITE DMA EXT
35 00 00 00 80 00 00 60 e7 01 30 40 00 08:31:07.650 WRITE DMA EXT
35 00 00 00 80 00 00 60 e7 00 b0 40 00 08:31:07.638 WRITE DMA EXT
Error 12 [11] occurred at disk power-on lifetime: 13 hours (0 days + 13 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
10 -- 51 00 80 00 00 34 b3 4b 40 40 00 Error: IDNF 128 sectors at LBA = 0x34b34b40 = 884165440
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
35 00 00 00 80 00 00 34 b3 24 c0 40 00 00:55:34.274 WRITE DMA EXT
35 00 00 00 80 00 00 34 b3 24 40 40 00 00:55:34.271 WRITE DMA EXT
35 00 00 00 80 00 00 34 b3 23 c0 40 00 00:55:34.265 WRITE DMA EXT
35 00 00 00 80 00 00 34 b3 23 40 40 00 00:55:34.261 WRITE DMA EXT
35 00 00 00 80 00 00 34 b3 22 c0 40 00 00:55:34.247 WRITE DMA EXT
Error 11 [10] occurred at disk power-on lifetime: 12 hours (0 days + 12 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
10 -- 51 00 10 00 00 28 9d 45 d8 40 00 Error: IDNF 16 sectors at LBA = 0x289d45d8 = 681395672
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
35 00 00 00 80 00 00 28 9c f7 d8 40 00 00:56:53.266 WRITE DMA EXT
35 00 00 00 80 00 00 28 9c f7 58 40 00 00:56:53.263 WRITE DMA EXT
35 00 00 00 80 00 00 28 9c f6 d8 40 00 00:56:53.246 WRITE DMA EXT
35 00 00 00 80 00 00 28 9c f6 58 40 00 00:56:53.243 WRITE DMA EXT
35 00 00 00 80 00 00 28 9c f5 d8 40 00 00:56:53.239 WRITE DMA EXT
Error 10 [9] occurred at disk power-on lifetime: 11 hours (0 days + 11 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
10 -- 51 00 10 00 00 11 c4 cc b0 40 00 Error: IDNF 16 sectors at LBA = 0x11c4ccb0 = 298110128
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
35 00 00 00 80 00 00 11 c4 a4 b0 40 00 07:40:50.136 WRITE DMA EXT
35 00 00 00 80 00 00 11 c4 a4 30 40 00 07:40:50.133 WRITE DMA EXT
35 00 00 00 80 00 00 11 c4 a3 b0 40 00 07:40:50.130 WRITE DMA EXT
35 00 00 00 80 00 00 11 c4 a3 30 40 00 07:40:50.127 WRITE DMA EXT
35 00 00 00 80 00 00 11 c4 a2 b0 40 00 07:40:50.124 WRITE DMA EXT
Error 9 [8] occurred at disk power-on lifetime: 3 hours (0 days + 3 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
10 -- 51 00 10 00 00 02 d4 7a 70 40 00 Error: IDNF 16 sectors at LBA = 0x02d47a70 = 47479408
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
35 00 00 00 80 00 00 02 d4 5b f0 40 00 00:40:20.829 WRITE DMA EXT
35 00 00 00 80 00 00 02 d4 5b 70 40 00 00:40:20.826 WRITE DMA EXT
35 00 00 00 80 00 00 02 d4 5a f0 40 00 00:40:20.823 WRITE DMA EXT
35 00 00 00 80 00 00 02 d4 5a 70 40 00 00:40:20.819 WRITE DMA EXT
35 00 00 00 80 00 00 02 d4 59 f0 40 00 00:40:20.809 WRITE DMA EXT
Error 8 [7] occurred at disk power-on lifetime: 2 hours (0 days + 2 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
10 -- 51 00 10 00 00 00 00 02 10 40 00 Error: IDNF 16 sectors at LBA = 0x00000210 = 528
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
35 00 00 00 10 00 00 00 00 02 10 40 00 00:20:56.188 WRITE DMA EXT
25 00 00 00 10 00 01 d1 c0 bc 10 40 00 00:20:56.185 READ DMA EXT
25 00 00 00 10 00 01 d1 c0 ba 10 40 00 00:20:56.161 READ DMA EXT
25 00 00 00 10 00 00 00 00 02 10 40 00 00:20:56.127 READ DMA EXT
35 00 00 00 80 00 01 d1 c0 bc 20 40 00 00:20:49.135 WRITE DMA EXT
Error 7 [6] occurred at disk power-on lifetime: 2 hours (0 days + 2 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
10 -- 51 00 80 00 01 d1 c0 bc 20 40 00 Error: IDNF 128 sectors at LBA = 0x1d1c0bc20 = 7814036512
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
35 00 00 00 80 00 01 d1 c0 bc 20 40 00 00:20:49.135 WRITE DMA EXT
35 00 00 00 80 00 01 d1 c0 bc 20 40 00 00:20:48.913 WRITE DMA EXT
35 00 00 00 10 00 01 d1 c0 bc 10 40 00 00:20:48.912 WRITE DMA EXT
35 00 00 00 80 00 01 d1 c0 bb 80 40 00 00:20:48.911 WRITE DMA EXT
35 00 00 00 80 00 01 d1 c0 bb 00 40 00 00:20:48.909 WRITE DMA EXT
Error 6 [5] occurred at disk power-on lifetime: 1 hours (0 days + 1 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
10 -- 51 00 80 00 00 00 00 03 80 40 00 Error: IDNF 128 sectors at LBA = 0x00000380 = 896
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
35 00 00 00 80 00 00 00 00 03 80 40 00 00:06:12.366 WRITE DMA EXT
35 00 00 00 80 00 00 00 00 03 80 40 00 00:06:12.162 WRITE DMA EXT
35 00 00 00 80 00 00 00 00 03 00 40 00 00:06:12.160 WRITE DMA EXT
35 00 00 00 60 00 00 00 00 02 a0 40 00 00:06:12.159 WRITE DMA EXT
35 00 00 00 80 00 00 00 00 02 20 40 00 00:06:12.157 WRITE DMA EXT
SMART Extended Self-test Log Version: 1 (1 sectors)
Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
# 1 Conveyance offline Completed without error 00% 15255 -
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
SCT Status Version: 3
SCT Version (vendor specific): 258 (0x0102)
Device State: Active (0)
Current Temperature: 30 Celsius
Power Cycle Min/Max Temperature: 28/34 Celsius
Lifetime Min/Max Temperature: 10/54 Celsius
Under/Over Temperature Limit Count: 0/0
Vendor specific:
01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
SCT Temperature History Version: 2
Temperature Sampling Period: 1 minute
Temperature Logging Interval: 1 minute
Min/Max recommended Temperature: 0/65 Celsius
Min/Max Temperature Limit: -41/85 Celsius
Temperature History Size (Index): 478 (430)
SCT Error Recovery Control:
Read: 70 (7.0 seconds)
Write: 70 (7.0 seconds)
Device Statistics (GP Log 0x04)
Page Offset Size Value Flags Description
0x01 ===== = = === == General Statistics (rev 1) ==
0x01 0x008 4 323 --- Lifetime Power-On Resets
0x01 0x010 4 51258 --- Power-on Hours
0x01 0x018 6 162966824990 --- Logical Sectors Written
0x01 0x020 6 2057631263 --- Number of Write Commands
0x01 0x028 6 296343969982 --- Logical Sectors Read
0x01 0x030 6 1309940307 --- Number of Read Commands
0x01 0x038 6 4140173568 --- Date and Time TimeStamp
0x03 ===== = = === == Rotating Media Statistics (rev 1) ==
0x03 0x008 4 49139 --- Spindle Motor Power-on Hours
0x03 0x010 4 45830 --- Head Flying Hours
0x03 0x018 4 5684 --- Head Load Events
0x03 0x020 4 0 --- Number of Reallocated Logical Sectors
0x03 0x028 4 287 --- Read Recovery Attempts
0x03 0x030 4 0 --- Number of Mechanical Start Failures
0x03 0x038 4 0 --- Number of Realloc. Candidate Logical Sectors
0x03 0x040 4 166 --- Number of High Priority Unload Events
0x04 ===== = = === == General Errors Statistics (rev 1) ==
0x04 0x008 4 13 --- Number of Reported Uncorrectable Errors
0x04 0x010 4 102 --- Resets Between Cmd Acceptance and Completion
0x05 ===== = = === == Temperature Statistics (rev 1) ==
0x05 0x008 1 30 --- Current Temperature
0x05 0x010 1 30 --- Average Short Term Temperature
0x05 0x018 1 32 --- Average Long Term Temperature
0x05 0x020 1 54 --- Highest Temperature
0x05 0x028 1 10 --- Lowest Temperature
0x05 0x030 1 51 --- Highest Average Short Term Temperature
0x05 0x038 1 11 --- Lowest Average Short Term Temperature
0x05 0x040 1 40 --- Highest Average Long Term Temperature
0x05 0x048 1 18 --- Lowest Average Long Term Temperature
0x05 0x050 4 0 --- Time in Over-Temperature
0x05 0x058 1 65 --- Specified Maximum Operating Temperature
0x05 0x060 4 0 --- Time in Under-Temperature
0x05 0x068 1 0 --- Specified Minimum Operating Temperature
0x06 ===== = = === == Transport Statistics (rev 1) ==
0x06 0x008 4 74513 --- Number of Hardware Resets
0x06 0x010 4 72713 --- Number of ASR Events
0x06 0x018 4 0 --- Number of Interface CRC Errors
|||_ C monitored condition met
||__ D supports DSN
|___ N normalized value
Pending Defects log (GP Log 0x0c) not supported
SATA Phy Event Counters (GP Log 0x11)
ID Size Value Description
0x0001 2 0 Command failed due to ICRC error
0x0002 2 0 R_ERR response for data FIS
0x0003 2 0 R_ERR response for device-to-host data FIS
0x0004 2 0 R_ERR response for host-to-device data FIS
0x0005 2 0 R_ERR response for non-data FIS
0x0006 2 0 R_ERR response for device-to-host non-data FIS
0x0007 2 0 R_ERR response for host-to-device non-data FIS
0x0008 2 0 Device-to-host non-data FIS retries
0x0009 2 104 Transition from drive PhyRdy to drive PhyNRdy
0x000a 2 105 Device-to-host register FISes sent due to a COMRESET
0x000b 2 0 CRC errors within host-to-device FIS
0x000d 2 0 Non-CRC errors within host-to-device FIS
0x000f 2 0 R_ERR response for host-to-device data FIS, CRC
0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC
0x8000 4 241477 Vendor specific
View Git Blame Copy Permalink