80486DX2-66/SMART-open-study
1
0
Fork 0
mirror of https://github.com/bsdhw/SMART.git synced 2025-05-31 16:21:41 +05:30
Code Issues Activity
Files
master
SMART-open-study/HDD/WDC/WD5000/WD5000AAKS-08V0A0/9FC9372A3606
Andrey Ponomarenko b1c41e7edc Update of reports (new: 3637, modified: 0)
2022-03-18 23:39:11 +03:00

315 lines
16 KiB
Plaintext
Raw Permalink Blame History

smartctl 7.2 2020-12-30 r5155 [FreeBSD 12.2-RELEASE amd64] (local build)
Copyright (C) 2002-20, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Model Family: Western Digital Caviar Blue (SATA)
Device Model: WDC WD5000AAKS-08V0A0
Serial Number: --
LU WWN Device Id: 5 0014ee ...
Firmware Version: 05.01D05
User Capacity: 500,107,862,016 bytes [500 GB]
Sector Size: 512 bytes logical/physical
Rotation Rate: 7200 rpm
Device is: In smartctl database [for details use: -P show]
ATA Version is: ATA8-ACS (minor revision not indicated)
SATA Version is: SATA 2.6, 3.0 Gb/s
Local Time is: Sun Nov 7 13:56:31 2021 EST
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
AAM level is: 128 (quiet), recommended: 128
APM feature is: Unavailable
Rd look-ahead is: Enabled
Write cache is: Enabled
DSN feature is: Unavailable
ATA Security is: Disabled, frozen [SEC2]
Wt Cache Reorder: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x84) Offline data collection activity
was suspended by an interrupting command from host.
Auto Offline Data Collection: Enabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: ( 7980) seconds.
Offline data collection
capabilities: (0x7b) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 2) minutes.
Extended self-test routine
recommended polling time: ( 95) minutes.
Conveyance self-test routine
recommended polling time: ( 5) minutes.
SCT capabilities: (0x3037) SCT Status supported.
SCT Feature Control supported.
SCT Data Table supported.
SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE
1 Raw_Read_Error_Rate POSR-K 200 200 051 - 215
3 Spin_Up_Time POS--K 151 141 021 - 3408
4 Start_Stop_Count -O--CK 097 097 000 - 3631
5 Reallocated_Sector_Ct PO--CK 200 200 140 - 0
7 Seek_Error_Rate -OSR-K 100 253 000 - 0
9 Power_On_Hours -O--CK 084 084 000 - 11756
10 Spin_Retry_Count -O--CK 100 100 000 - 0
11 Calibration_Retry_Count -O--CK 100 100 000 - 0
12 Power_Cycle_Count -O--CK 097 097 000 - 3521
192 Power-Off_Retract_Count -O--CK 199 199 000 - 762
193 Load_Cycle_Count -O--CK 200 200 000 - 2868
194 Temperature_Celsius -O---K 096 082 000 - 47
196 Reallocated_Event_Count -O--CK 200 200 000 - 0
197 Current_Pending_Sector -O--CK 200 200 000 - 3
198 Offline_Uncorrectable ----CK 200 200 000 - 3
199 UDMA_CRC_Error_Count -O--CK 200 200 000 - 11239
200 Multi_Zone_Error_Rate ---R-- 200 200 000 - 2
||||||_ K auto-keep
|||||__ C event count
||||___ R error rate
|||____ S speed/performance
||_____ O updated online
|______ P prefailure warning
General Purpose Log Directory Version 1
SMART Log Directory Version 1 [multi-sector log support]
Address Access R/W Size Description
0x00 GPL,SL R/O 1 Log Directory
0x01 SL R/O 1 Summary SMART error log
0x02 SL R/O 5 Comprehensive SMART error log
0x03 GPL R/O 6 Ext. Comprehensive SMART error log
0x06 SL R/O 1 SMART self-test log
0x07 GPL R/O 1 Extended self-test log
0x09 SL R/W 1 Selective self-test log
0x10 GPL R/O 1 NCQ Command Error log
0x11 GPL R/O 1 SATA Phy Event Counters log
0x80-0x9f GPL,SL R/W 16 Host vendor specific log
0xa0-0xa7 GPL,SL VS 16 Device vendor specific log
0xa8-0xb5 GPL,SL VS 1 Device vendor specific log
0xb6 GPL VS 1 Device vendor specific log
0xb7 GPL,SL VS 1 Device vendor specific log
0xc0 GPL,SL VS 1 Device vendor specific log
0xc1 GPL VS 24 Device vendor specific log
0xe0 GPL,SL R/W 1 SCT Command/Status
0xe1 GPL,SL R/W 1 SCT Data Transfer
SMART Extended Comprehensive Error Log Version: 1 (6 sectors)
Device Error Count: 455 (device log contains only the most recent 24 errors)
CR = Command Register
FEATR = Features Register
COUNT = Count (was: Sector Count) Register
LBA_48 = Upper bytes of LBA High/Mid/Low Registers ] ATA-8
LH = LBA High (was: Cylinder High) Register ] LBA
LM = LBA Mid (was: Cylinder Low) Register ] Register
LL = LBA Low (was: Sector Number) Register ]
DV = Device (was: Device/Head) Register
DC = Device Control Register
ER = Error register
ST = Status register
Powered_Up_Time is measured from power on, and printed as
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
SS=sec, and sss=millisec. It "wraps" after 49.710 days.
Error 455 [22] occurred at disk power-on lifetime: 11706 hours (487 days + 18 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
40 -- 51 00 20 00 00 1c 98 e9 f8 e0 00 Error: UNC 32 sectors at LBA = 0x1c98e9f8 = 479783416
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
25 00 00 00 20 00 00 1c 98 e9 f8 e0 08 00:05:23.641 READ DMA EXT
25 00 00 00 08 00 00 1c 98 e9 f0 e0 08 00:05:23.641 READ DMA EXT
25 00 00 00 20 00 00 1c 98 e8 e8 e0 08 00:05:23.640 READ DMA EXT
25 00 00 00 08 00 00 1c 98 e8 e0 e0 08 00:05:23.640 READ DMA EXT
25 00 00 01 00 00 00 1c 98 e6 78 e0 08 00:05:23.638 READ DMA EXT
Error 454 [21] occurred at disk power-on lifetime: 11688 hours (487 days + 0 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
40 -- 51 00 08 00 00 00 da 27 32 e0 00 Error: UNC 8 sectors at LBA = 0x00da2732 = 14296882
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
c8 00 00 00 08 00 00 00 da 27 30 e0 08 00:08:31.131 READ DMA
c8 00 00 00 18 00 00 0b 62 f7 c8 eb 08 00:08:31.130 READ DMA
c8 00 00 00 00 00 00 04 7e 60 00 e4 08 00:08:31.129 READ DMA
c8 00 00 00 20 00 00 06 06 20 18 e6 08 00:08:31.113 READ DMA
ea 00 00 00 00 00 00 1c 95 4c f7 e0 08 00:08:31.097 FLUSH CACHE EXT
Error 453 [20] occurred at disk power-on lifetime: 11688 hours (487 days + 0 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
40 -- 51 00 08 00 00 00 da 27 32 e0 00 Error: UNC 8 sectors at LBA = 0x00da2732 = 14296882
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
c8 00 00 00 08 00 00 00 da 27 30 e0 08 00:08:29.175 READ DMA
c8 00 00 00 00 00 00 04 7e 5f 00 e4 08 00:08:29.172 READ DMA
27 00 00 00 00 00 00 00 00 00 00 e0 08 00:08:29.172 READ NATIVE MAX ADDRESS EXT [OBS-ACS-3]
ec 00 00 00 00 00 00 00 00 00 00 a0 08 00:08:29.170 IDENTIFY DEVICE
ef 00 03 00 45 00 00 00 00 00 00 a0 08 00:08:29.170 SET FEATURES [Set transfer mode]
Error 452 [19] occurred at disk power-on lifetime: 11688 hours (487 days + 0 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
40 -- 51 00 08 00 00 00 da 27 32 e0 00 Error: UNC 8 sectors at LBA = 0x00da2732 = 14296882
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
c8 00 00 00 08 00 00 00 da 27 30 e0 08 00:08:27.339 READ DMA
c8 00 00 00 08 00 00 00 da 27 28 e0 08 00:08:27.339 READ DMA
c8 00 00 00 08 00 00 00 da 27 20 e0 08 00:08:27.339 READ DMA
c8 00 00 00 08 00 00 00 da 27 18 e0 08 00:08:27.339 READ DMA
c8 00 00 00 08 00 00 00 da 27 10 e0 08 00:08:27.338 READ DMA
Error 451 [18] occurred at disk power-on lifetime: 11688 hours (487 days + 0 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
40 -- 51 02 00 00 00 00 da 26 00 e0 00 Error: UNC 512 sectors at LBA = 0x00da2600 = 14296576
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
25 00 00 02 00 00 00 00 da 26 00 e0 08 00:08:25.494 READ DMA EXT
25 00 00 02 00 00 00 00 da 24 00 e0 08 00:08:25.491 READ DMA EXT
25 00 00 02 00 00 00 00 da 22 00 e0 08 00:08:25.490 READ DMA EXT
25 00 00 02 00 00 00 00 da 20 00 e0 08 00:08:25.488 READ DMA EXT
25 00 00 02 00 00 00 00 da 1e 00 e0 08 00:08:25.486 READ DMA EXT
Error 450 [17] occurred at disk power-on lifetime: 7795 hours (324 days + 19 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
40 -- 51 00 08 00 00 1b 55 10 21 e0 00 Error: UNC 8 sectors at LBA = 0x1b551021 = 458559521
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
25 00 00 00 08 00 00 1b 55 10 21 e0 08 00:33:34.440 READ DMA EXT
c8 00 00 00 a0 00 00 09 35 8f 49 e9 08 00:33:34.420 READ DMA
c8 00 00 00 00 00 00 09 35 98 31 e9 08 00:33:34.419 READ DMA
c8 00 00 00 00 00 00 09 35 ba a1 e9 08 00:33:34.394 READ DMA
c8 00 00 00 c8 00 00 09 35 8d 81 e9 08 00:33:34.393 READ DMA
Error 449 [16] occurred at disk power-on lifetime: 7795 hours (324 days + 19 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
40 -- 51 00 08 00 00 1b 55 10 21 e0 00 Error: UNC 8 sectors at LBA = 0x1b551021 = 458559521
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
25 00 00 00 08 00 00 1b 55 10 21 e0 08 00:33:32.515 READ DMA EXT
25 00 00 00 08 00 00 1b 55 10 19 e0 08 00:33:32.515 READ DMA EXT
25 00 00 00 08 00 00 1b 55 10 11 e0 08 00:33:32.515 READ DMA EXT
25 00 00 00 08 00 00 1b 55 10 09 e0 08 00:33:32.515 READ DMA EXT
c8 00 00 00 18 00 00 09 35 8c 69 e9 08 00:33:32.497 READ DMA
Error 448 [15] occurred at disk power-on lifetime: 7795 hours (324 days + 19 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
40 -- 51 00 40 00 00 1b 55 0f e9 e0 00 Error: UNC 64 sectors at LBA = 0x1b550fe9 = 458559465
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
25 00 00 00 40 00 00 1b 55 0f e9 e0 08 00:33:30.402 READ DMA EXT
25 00 00 00 88 00 00 1b 55 0f 61 e0 08 00:33:30.397 READ DMA EXT
25 00 00 00 60 00 00 1b 55 0e e9 e0 08 00:33:30.396 READ DMA EXT
25 00 00 00 20 00 00 1b 38 93 79 e0 08 00:33:30.393 READ DMA EXT
25 00 00 00 a0 00 00 1b 38 92 c1 e0 08 00:33:30.393 READ DMA EXT
SMART Extended Self-test Log Version: 1 (1 sectors)
Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
# 1 Short offline Completed without error 00% 10055 -
# 2 Short offline Completed without error 00% 10047 -
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
SCT Status Version: 2
SCT Version (vendor specific): 258 (0x0102)
Device State: Active (0)
Current Temperature: 47 Celsius
Power Cycle Min/Max Temperature: 31/47 Celsius
Lifetime Min/Max Temperature: ?/61 Celsius
Under/Over Temperature Limit Count: 0/0
SCT Temperature History Version: 2
Temperature Sampling Period: 1 minute
Temperature Logging Interval: 1 minute
Min/Max recommended Temperature: 0/60 Celsius
Min/Max Temperature Limit: -41/85 Celsius
Temperature History Size (Index): 478 (386)
SCT Error Recovery Control command not supported
Device Statistics (GP/SMART Log 0x04) not supported
Pending Defects log (GP Log 0x0c) not supported
SATA Phy Event Counters (GP Log 0x11)
ID Size Value Description
0x0001 2 0 Command failed due to ICRC error
0x0002 2 0 R_ERR response for data FIS
0x0003 2 0 R_ERR response for device-to-host data FIS
0x0004 2 0 R_ERR response for host-to-device data FIS
0x0005 2 0 R_ERR response for non-data FIS
0x0006 2 0 R_ERR response for device-to-host non-data FIS
0x0007 2 0 R_ERR response for host-to-device non-data FIS
0x000a 2 7 Device-to-host register FISes sent due to a COMRESET
0x000b 2 0 CRC errors within host-to-device FIS
0x8000 4 5650 Vendor specific
View Git Blame Copy Permalink