80486DX2-66/SMART-open-study
1
0
Fork 0
mirror of https://github.com/bsdhw/SMART.git synced 2025-05-31 16:21:41 +05:30
Code Issues Activity
Files
master
SMART-open-study/HDD/WDC/WD5000/WD5000AAKS-22A7B2/E87CF99F84B2
Andrey Ponomarenko 43e2303314 Update of reports (new: 0, modified: 538)
2025-01-05 03:27:12 +03:00

318 lines
16 KiB
Plaintext
Raw Permalink Blame History

smartctl 7.4 2023-08-01 r5530 [FreeBSD 14.1-RELEASE-p6 amd64] (local build)
Copyright (C) 2002-23, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Model Family: Western Digital Caviar Blue (SATA)
Device Model: WDC WD5000AAKS-22A7B2
Serial Number: --
LU WWN Device Id: 5 0014ee ...
Firmware Version: 01.03B01
User Capacity: 500,103,634,432 bytes [500 GB]
Sector Size: 512 bytes logical/physical
Device is: In smartctl database 7.3/5528
ATA Version is: ATA8-ACS (minor revision not indicated)
SATA Version is: SATA 2.5, 3.0 Gb/s
Local Time is: Fri Dec 20 09:44:15 2024 CST
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
AAM feature is: Disabled
APM feature is: Unavailable
Rd look-ahead is: Enabled
Write cache is: Enabled
DSN feature is: Unavailable
ATA Security is: Disabled, NOT FROZEN [SEC1]
Wt Cache Reorder: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x82) Offline data collection activity
was completed without error.
Auto Offline Data Collection: Enabled.
Self-test execution status: ( 121) The previous self-test completed having
the read element of the test failed.
Total time to complete Offline
data collection: (10800) seconds.
Offline data collection
capabilities: (0x7b) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 2) minutes.
Extended self-test routine
recommended polling time: ( 127) minutes.
Conveyance self-test routine
recommended polling time: ( 5) minutes.
SCT capabilities: (0x303f) SCT Status supported.
SCT Error Recovery Control supported.
SCT Feature Control supported.
SCT Data Table supported.
SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE
1 Raw_Read_Error_Rate POSR-K 200 200 051 - 0
3 Spin_Up_Time POS--K 160 154 021 - 4958
4 Start_Stop_Count -O--CK 092 092 000 - 8122
5 Reallocated_Sector_Ct PO--CK 200 200 140 - 0
7 Seek_Error_Rate -OSR-K 100 253 000 - 0
9 Power_On_Hours -O--CK 061 061 000 - 29065
10 Spin_Retry_Count -O--CK 100 100 000 - 0
11 Calibration_Retry_Count -O--CK 100 100 000 - 0
12 Power_Cycle_Count -O--CK 098 098 000 - 2236
192 Power-Off_Retract_Count -O--CK 200 200 000 - 561
193 Load_Cycle_Count -O--CK 198 198 000 - 8118
194 Temperature_Celsius -O---K 115 092 000 - 32
196 Reallocated_Event_Count -O--CK 200 200 000 - 0
197 Current_Pending_Sector -O--CK 200 200 000 - 1
198 Offline_Uncorrectable ----CK 200 200 000 - 1
199 UDMA_CRC_Error_Count -O--CK 200 200 000 - 821
200 Multi_Zone_Error_Rate ---R-- 200 200 000 - 0
||||||_ K auto-keep
|||||__ C event count
||||___ R error rate
|||____ S speed/performance
||_____ O updated online
|______ P prefailure warning
General Purpose Log Directory Version 1
SMART Log Directory Version 1 [multi-sector log support]
Address Access R/W Size Description
0x00 GPL,SL R/O 1 Log Directory
0x01 SL R/O 1 Summary SMART error log
0x02 SL R/O 5 Comprehensive SMART error log
0x03 GPL R/O 6 Ext. Comprehensive SMART error log
0x06 SL R/O 1 SMART self-test log
0x07 GPL R/O 1 Extended self-test log
0x09 SL R/W 1 Selective self-test log
0x10 GPL R/O 1 NCQ Command Error log
0x11 GPL R/O 1 SATA Phy Event Counters log
0x80-0x9f GPL,SL R/W 16 Host vendor specific log
0xa0-0xa7 GPL,SL VS 16 Device vendor specific log
0xa8-0xb7 GPL,SL VS 1 Device vendor specific log
0xc0 GPL,SL VS 1 Device vendor specific log
0xc1 GPL VS 24 Device vendor specific log
0xe0 GPL,SL R/W 1 SCT Command/Status
0xe1 GPL,SL R/W 1 SCT Data Transfer
SMART Extended Comprehensive Error Log Version: 1 (6 sectors)
Device Error Count: 67 (device log contains only the most recent 24 errors)
CR = Command Register
FEATR = Features Register
COUNT = Count (was: Sector Count) Register
LBA_48 = Upper bytes of LBA High/Mid/Low Registers ] ATA-8
LH = LBA High (was: Cylinder High) Register ] LBA
LM = LBA Mid (was: Cylinder Low) Register ] Register
LL = LBA Low (was: Sector Number) Register ]
DV = Device (was: Device/Head) Register
DC = Device Control Register
ER = Error register
ST = Status register
Powered_Up_Time is measured from power on, and printed as
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
SS=sec, and sss=millisec. It "wraps" after 49.710 days.
Error 67 [18] occurred at disk power-on lifetime: 14545 hours (606 days + 1 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
40 -- 51 00 01 00 00 77 00 18 a5 e0 00 Error: UNC 1 sectors at LBA = 0x770018a5 = 1996495013
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
25 00 00 00 01 00 00 00 18 77 a5 e0 00 01:42:56.362 READ DMA EXT
25 00 00 00 01 00 00 00 18 77 a4 e0 00 01:42:56.362 READ DMA EXT
25 00 00 00 01 00 00 00 18 77 a3 e0 00 01:42:56.361 READ DMA EXT
25 00 00 00 01 00 00 00 18 77 a2 e0 00 01:42:56.361 READ DMA EXT
25 00 00 00 01 00 00 00 18 77 a3 e0 00 01:42:56.361 READ DMA EXT
Error 66 [17] occurred at disk power-on lifetime: 14545 hours (606 days + 1 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
40 -- 51 00 80 00 00 77 00 18 44 e0 00 Error: UNC 128 sectors at LBA = 0x77001844 = 1996494916
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
25 00 00 00 80 00 00 00 18 77 44 e0 00 01:42:53.758 READ DMA EXT
25 00 00 00 80 00 00 00 18 76 c4 e0 00 01:42:53.705 READ DMA EXT
25 00 00 00 80 00 00 00 18 76 44 e0 00 01:42:53.692 READ DMA EXT
25 00 00 00 80 00 00 00 18 75 c4 e0 00 01:42:53.571 READ DMA EXT
25 00 00 00 80 00 00 00 18 75 44 e0 00 01:42:53.561 READ DMA EXT
Error 65 [16] occurred at disk power-on lifetime: 14544 hours (606 days + 0 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
40 -- 51 00 01 00 00 77 00 18 a5 e0 00 Error: UNC 1 sectors at LBA = 0x770018a5 = 1996495013
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
25 00 00 00 01 00 00 00 18 77 a5 e0 00 00:54:18.721 READ DMA EXT
25 00 00 00 01 00 00 00 18 77 a4 e0 00 00:54:18.721 READ DMA EXT
25 00 00 00 01 00 00 00 18 77 a3 e0 00 00:54:18.721 READ DMA EXT
25 00 00 00 01 00 00 00 18 77 a2 e0 00 00:54:18.721 READ DMA EXT
25 00 00 00 01 00 00 00 18 77 a3 e0 00 00:54:18.720 READ DMA EXT
Error 64 [15] occurred at disk power-on lifetime: 14544 hours (606 days + 0 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
40 -- 51 00 80 00 00 77 00 18 90 e0 00 Error: UNC 128 sectors at LBA = 0x77001890 = 1996494992
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
25 00 00 00 80 00 00 00 18 77 90 e0 00 00:54:15.646 READ DMA EXT
25 00 00 00 80 00 00 00 18 77 10 e0 00 00:54:15.638 READ DMA EXT
25 00 00 00 80 00 00 00 18 76 90 e0 00 00:54:15.402 READ DMA EXT
25 00 00 00 80 00 00 00 18 76 10 e0 00 00:54:15.390 READ DMA EXT
25 00 00 00 80 00 00 00 18 75 90 e0 00 00:54:15.219 READ DMA EXT
Error 63 [14] occurred at disk power-on lifetime: 14544 hours (606 days + 0 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
40 -- 51 00 01 00 00 77 00 18 a5 e0 00 Error: UNC 1 sectors at LBA = 0x770018a5 = 1996495013
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
25 00 00 00 01 00 00 00 18 77 a5 e0 00 00:39:04.044 READ DMA EXT
25 00 00 00 01 00 00 00 18 77 a4 e0 00 00:39:04.044 READ DMA EXT
25 00 00 00 02 00 00 2c d9 4e 6e e0 00 00:39:04.043 READ DMA EXT
25 00 00 00 01 00 00 00 18 77 a3 e0 00 00:39:04.043 READ DMA EXT
25 00 00 00 01 00 00 00 18 77 a2 e0 00 00:39:04.043 READ DMA EXT
Error 62 [13] occurred at disk power-on lifetime: 14544 hours (606 days + 0 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
40 -- 51 00 80 00 00 77 00 18 4c e0 00 Error: UNC 128 sectors at LBA = 0x7700184c = 1996494924
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
25 00 00 00 80 00 00 00 18 77 4c e0 00 00:39:00.974 READ DMA EXT
25 00 00 00 02 00 00 2c d9 4e 30 e0 00 00:39:00.916 READ DMA EXT
25 00 00 00 02 00 00 2c d9 4e 1c e0 00 00:39:00.903 READ DMA EXT
25 00 00 00 02 00 00 2c d9 4e 0a e0 00 00:39:00.889 READ DMA EXT
25 00 00 00 80 00 00 00 18 76 cc e0 00 00:39:00.889 READ DMA EXT
Error 61 [12] occurred at disk power-on lifetime: 14497 hours (604 days + 1 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
40 -- 51 00 00 00 00 77 00 18 a5 40 00 Error: UNC at LBA = 0x770018a5 = 1996495013
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
60 00 01 00 08 00 00 00 18 77 a5 40 00 02:49:52.047 READ FPDMA QUEUED
ef 00 02 00 00 00 00 00 00 00 00 00 00 02:49:52.047 SET FEATURES [Enable write cache]
60 00 01 00 08 00 00 00 18 77 a5 40 00 02:49:49.460 READ FPDMA QUEUED
ef 00 02 00 00 00 00 00 00 00 00 00 00 02:49:49.460 SET FEATURES [Enable write cache]
60 00 01 00 08 00 00 00 18 77 a5 40 00 02:49:46.717 READ FPDMA QUEUED
Error 60 [11] occurred at disk power-on lifetime: 14497 hours (604 days + 1 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
40 -- 51 00 00 00 00 77 00 18 a5 40 00 Error: UNC at LBA = 0x770018a5 = 1996495013
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
60 00 01 00 08 00 00 00 18 77 a5 40 00 02:49:49.460 READ FPDMA QUEUED
ef 00 02 00 00 00 00 00 00 00 00 00 00 02:49:49.460 SET FEATURES [Enable write cache]
60 00 01 00 08 00 00 00 18 77 a5 40 00 02:49:46.717 READ FPDMA QUEUED
ef 00 02 00 00 00 00 00 00 00 00 00 00 02:49:46.717 SET FEATURES [Enable write cache]
60 00 01 00 08 00 00 00 18 77 a5 40 00 02:49:43.974 READ FPDMA QUEUED
SMART Extended Self-test Log Version: 1 (1 sectors)
Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
# 1 Short offline Completed: read failure 90% 29065 75946638
# 2 Short offline Completed: read failure 90% 28968 75946638
# 3 Short offline Completed: read failure 10% 28784 75946638
# 4 Short offline Completed without error 00% 21874 -
# 5 Short offline Completed: read failure 90% 14554 1603493
# 6 Short offline Completed: read failure 90% 14554 1603493
# 7 Short offline Completed: read failure 90% 14554 1603493
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
SCT Status Version: 2
SCT Version (vendor specific): 258 (0x0102)
Device State: Active (0)
Current Temperature: 31 Celsius
Power Cycle Min/Max Temperature: 30/31 Celsius
Lifetime Min/Max Temperature: 31/55 Celsius
Under/Over Temperature Limit Count: 0/0
SCT Temperature History Version: 2
Temperature Sampling Period: 1 minute
Temperature Logging Interval: 1 minute
Min/Max recommended Temperature: 0/60 Celsius
Min/Max Temperature Limit: -41/85 Celsius
Temperature History Size (Index): 128 (90)
SCT Error Recovery Control:
Read: Disabled
Write: Disabled
Device Statistics (GP/SMART Log 0x04) not supported
Pending Defects log (GP Log 0x0c) not supported
SATA Phy Event Counters (GP Log 0x11)
ID Size Value Description
0x0001 2 0 Command failed due to ICRC error
0x0002 2 0 R_ERR response for data FIS
0x0003 2 0 R_ERR response for device-to-host data FIS
0x0004 2 0 R_ERR response for host-to-device data FIS
0x0005 2 0 R_ERR response for non-data FIS
0x0006 2 0 R_ERR response for device-to-host non-data FIS
0x0007 2 0 R_ERR response for host-to-device non-data FIS
0x000a 2 3 Device-to-host register FISes sent due to a COMRESET
0x8000 4 1080 Vendor specific
View Git Blame Copy Permalink