80486DX2-66/SMART-open-study
1
0
Fork 0
mirror of https://github.com/bsdhw/SMART.git synced 2025-05-31 16:21:41 +05:30
Code Issues Activity
Files
master
SMART-open-study/HDD/WDC/WD5000/WD5000AAKX-603CA0/6428E6533973
Andrey Ponomarenko 06d1e49c98 Update of reports (new: 3633, modified: 0)
2023-02-14 01:25:13 +03:00

341 lines
17 KiB
Plaintext
Raw Permalink Blame History

smartctl 7.3 2022-02-28 r5338 [FreeBSD 12.3-RELEASE-p6 amd64] (local build)
Copyright (C) 2002-22, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Model Family: Western Digital Blue
Device Model: WDC WD5000AAKX-603CA0
Serial Number: --
LU WWN Device Id: 5 0014ee ...
Firmware Version: 18.01H18
User Capacity: 500,107,862,016 bytes [500 GB]
Sector Size: 512 bytes logical/physical
Rotation Rate: 7200 rpm
Form Factor: 3.5 inches
Device is: In smartctl database 7.3/5319
ATA Version is: ATA8-ACS (minor revision not indicated)
SATA Version is: SATA 3.0, 6.0 Gb/s (current: 6.0 Gb/s)
Local Time is: Tue Nov 29 21:12:44 2022 CET
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
AAM feature is: Unavailable
APM feature is: Unavailable
Rd look-ahead is: Enabled
Write cache is: Enabled
DSN feature is: Unavailable
ATA Security is: Disabled, frozen [SEC2]
Wt Cache Reorder: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
See vendor-specific Attribute list for marginal Attributes.
General SMART Values:
Offline data collection status: (0x82) Offline data collection activity
was completed without error.
Auto Offline Data Collection: Enabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: ( 9000) seconds.
Offline data collection
capabilities: (0x5b) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
No Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 2) minutes.
Extended self-test routine
recommended polling time: ( 91) minutes.
SCT capabilities: (0x303f) SCT Status supported.
SCT Error Recovery Control supported.
SCT Feature Control supported.
SCT Data Table supported.
SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE
1 Raw_Read_Error_Rate POSR-K 200 200 051 - 0
3 Spin_Up_Time POS--K 143 141 021 - 3833
4 Start_Stop_Count -O--CK 097 097 000 - 3215
5 Reallocated_Sector_Ct PO--CK 200 200 140 - 0
7 Seek_Error_Rate POSR-K 200 200 051 - 0
9 Power_On_Hours -O--CK 048 048 000 - 38382
10 Spin_Retry_Count PO--CK 100 100 051 - 0
11 Calibration_Retry_Count -O--CK 100 100 000 - 0
12 Power_Cycle_Count -O--CK 097 097 000 - 3205
184 End-to-End_Error PO--CK 100 100 097 - 0
187 Reported_Uncorrect -O--CK 100 095 000 - 12
188 Command_Timeout -O--CK 100 098 000 - 4295032928
190 Airflow_Temperature_Cel -O---K 051 038 040 Past 49 (Min/Max 37/55 #263)
192 Power-Off_Retract_Count -O--CK 200 200 000 - 41
193 Load_Cycle_Count -O--CK 199 199 000 - 3173
196 Reallocated_Event_Count -O--CK 200 200 000 - 0
197 Current_Pending_Sector -O--CK 200 200 000 - 0
198 Offline_Uncorrectable ----CK 200 200 000 - 1
199 UDMA_CRC_Error_Count -O--CK 200 200 000 - 0
200 Multi_Zone_Error_Rate ---R-- 200 200 000 - 0
||||||_ K auto-keep
|||||__ C event count
||||___ R error rate
|||____ S speed/performance
||_____ O updated online
|______ P prefailure warning
General Purpose Log Directory Version 1
SMART Log Directory Version 1 [multi-sector log support]
Address Access R/W Size Description
0x00 GPL,SL R/O 1 Log Directory
0x01 SL R/O 1 Summary SMART error log
0x02 SL R/O 5 Comprehensive SMART error log
0x03 GPL R/O 6 Ext. Comprehensive SMART error log
0x06 SL R/O 1 SMART self-test log
0x07 GPL R/O 1 Extended self-test log
0x09 SL R/W 1 Selective self-test log
0x10 GPL R/O 1 NCQ Command Error log
0x11 GPL R/O 1 SATA Phy Event Counters log
0x80-0x9f GPL,SL R/W 16 Host vendor specific log
0xa0-0xa7 GPL,SL VS 16 Device vendor specific log
0xa8-0xb5 GPL,SL VS 1 Device vendor specific log
0xb6 GPL VS 1 Device vendor specific log
0xb7 GPL,SL VS 1 Device vendor specific log
0xbd GPL,SL VS 1 Device vendor specific log
0xc0 GPL,SL VS 1 Device vendor specific log
0xc1 GPL VS 24 Device vendor specific log
0xe0 GPL,SL R/W 1 SCT Command/Status
0xe1 GPL,SL R/W 1 SCT Data Transfer
SMART Extended Comprehensive Error Log Version: 1 (6 sectors)
Device Error Count: 13
CR = Command Register
FEATR = Features Register
COUNT = Count (was: Sector Count) Register
LBA_48 = Upper bytes of LBA High/Mid/Low Registers ] ATA-8
LH = LBA High (was: Cylinder High) Register ] LBA
LM = LBA Mid (was: Cylinder Low) Register ] Register
LL = LBA Low (was: Sector Number) Register ]
DV = Device (was: Device/Head) Register
DC = Device Control Register
ER = Error register
ST = Status register
Powered_Up_Time is measured from power on, and printed as
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
SS=sec, and sss=millisec. It "wraps" after 49.710 days.
Error 13 [12] occurred at disk power-on lifetime: 38289 hours (1595 days + 9 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
40 -- 51 00 00 00 00 34 8c f3 62 40 00 Error: WP at LBA = 0x348cf362 = 881652578
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
61 00 08 00 68 00 00 2b 80 fc a8 40 08 4d+15:28:34.360 WRITE FPDMA QUEUED
60 01 00 00 60 00 00 34 8d 00 68 40 08 4d+15:28:34.360 READ FPDMA QUEUED
60 01 00 00 58 00 00 34 8c ff 68 40 08 4d+15:28:34.359 READ FPDMA QUEUED
60 01 00 00 50 00 00 34 8c fe 68 40 08 4d+15:28:34.359 READ FPDMA QUEUED
60 01 00 00 48 00 00 34 8c fd 68 40 08 4d+15:28:34.359 READ FPDMA QUEUED
Error 12 [11] occurred at disk power-on lifetime: 38289 hours (1595 days + 9 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
40 -- 51 00 00 00 00 34 8c f3 62 40 00 Error: WP at LBA = 0x348cf362 = 881652578
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
61 00 08 00 e0 00 00 2b 80 fc a8 40 08 4d+15:28:32.587 WRITE FPDMA QUEUED
60 01 00 00 d8 00 00 34 8d 00 68 40 08 4d+15:28:32.586 READ FPDMA QUEUED
60 01 00 00 d0 00 00 34 8c ff 68 40 08 4d+15:28:32.586 READ FPDMA QUEUED
60 01 00 00 c8 00 00 34 8c fe 68 40 08 4d+15:28:32.586 READ FPDMA QUEUED
60 01 00 00 c0 00 00 34 8c fd 68 40 08 4d+15:28:32.586 READ FPDMA QUEUED
Error 11 [10] occurred at disk power-on lifetime: 38289 hours (1595 days + 9 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
40 -- 51 00 00 00 00 34 8c f3 62 40 00 Error: WP at LBA = 0x348cf362 = 881652578
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
61 00 08 00 58 00 00 2b 80 fc a8 40 08 4d+15:28:30.813 WRITE FPDMA QUEUED
60 01 00 00 50 00 00 34 8d 00 68 40 08 4d+15:28:30.813 READ FPDMA QUEUED
60 01 00 00 48 00 00 34 8c ff 68 40 08 4d+15:28:30.813 READ FPDMA QUEUED
60 01 00 00 40 00 00 34 8c fe 68 40 08 4d+15:28:30.813 READ FPDMA QUEUED
60 01 00 00 38 00 00 34 8c fd 68 40 08 4d+15:28:30.813 READ FPDMA QUEUED
Error 10 [9] occurred at disk power-on lifetime: 38289 hours (1595 days + 9 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
40 -- 51 00 00 00 00 34 8c f3 62 40 00 Error: UNC at LBA = 0x348cf362 = 881652578
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
60 01 00 00 c8 00 00 34 8d 00 68 40 08 4d+15:28:29.040 READ FPDMA QUEUED
60 01 00 00 c0 00 00 34 8c ff 68 40 08 4d+15:28:29.040 READ FPDMA QUEUED
60 01 00 00 b8 00 00 34 8c fe 68 40 08 4d+15:28:29.040 READ FPDMA QUEUED
60 01 00 00 b0 00 00 34 8c fd 68 40 08 4d+15:28:29.040 READ FPDMA QUEUED
60 01 00 00 a8 00 00 34 8c fc 68 40 08 4d+15:28:29.040 READ FPDMA QUEUED
Error 9 [8] occurred at disk power-on lifetime: 38289 hours (1595 days + 9 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
40 -- 51 00 00 00 00 34 8c f3 62 40 00 Error: UNC at LBA = 0x348cf362 = 881652578
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
60 01 00 00 48 00 00 34 8d 00 68 40 08 4d+15:28:27.290 READ FPDMA QUEUED
60 01 00 00 40 00 00 34 8c ff 68 40 08 4d+15:28:27.290 READ FPDMA QUEUED
60 01 00 00 38 00 00 34 8c fe 68 40 08 4d+15:28:27.289 READ FPDMA QUEUED
60 01 00 00 30 00 00 34 8c fd 68 40 08 4d+15:28:27.289 READ FPDMA QUEUED
60 01 00 00 28 00 00 34 8c fc 68 40 08 4d+15:28:27.289 READ FPDMA QUEUED
Error 8 [7] occurred at disk power-on lifetime: 37216 hours (1550 days + 16 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
40 -- 51 00 00 00 00 34 8c f3 62 40 00 Error: UNC at LBA = 0x348cf362 = 881652578
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
60 01 00 00 18 00 00 34 8d 00 68 40 08 37d+19:09:37.343 READ FPDMA QUEUED
60 01 00 00 10 00 00 34 8c ff 68 40 08 37d+19:09:37.343 READ FPDMA QUEUED
60 01 00 00 08 00 00 34 8c fe 68 40 08 37d+19:09:37.343 READ FPDMA QUEUED
60 01 00 00 00 00 00 34 8c fd 68 40 08 37d+19:09:37.342 READ FPDMA QUEUED
60 01 00 00 f8 00 00 34 8c fc 68 40 08 37d+19:09:37.342 READ FPDMA QUEUED
Error 7 [6] occurred at disk power-on lifetime: 36499 hours (1520 days + 19 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
40 -- 51 00 00 00 00 34 8c f3 62 40 00 Error: UNC at LBA = 0x348cf362 = 881652578
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
60 01 00 00 a8 00 00 34 8d 00 68 40 08 7d+20:39:20.231 READ FPDMA QUEUED
60 01 00 00 a0 00 00 34 8c ff 68 40 08 7d+20:39:20.231 READ FPDMA QUEUED
60 01 00 00 98 00 00 34 8c fe 68 40 08 7d+20:39:20.231 READ FPDMA QUEUED
60 01 00 00 90 00 00 34 8c fd 68 40 08 7d+20:39:20.231 READ FPDMA QUEUED
60 01 00 00 88 00 00 34 8c fc 68 40 08 7d+20:39:20.230 READ FPDMA QUEUED
Error 6 [5] occurred at disk power-on lifetime: 33627 hours (1401 days + 3 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
40 -- 51 00 00 00 00 34 8c f3 62 40 00 Error: WP at LBA = 0x348cf362 = 881652578
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
61 00 08 00 98 00 00 35 00 5b 20 40 08 37d+02:40:52.645 WRITE FPDMA QUEUED
60 01 00 00 90 00 00 34 8d 00 68 40 08 37d+02:40:52.645 READ FPDMA QUEUED
60 01 00 00 88 00 00 34 8c ff 68 40 08 37d+02:40:52.645 READ FPDMA QUEUED
60 01 00 00 80 00 00 34 8c fe 68 40 08 37d+02:40:52.645 READ FPDMA QUEUED
60 01 00 00 78 00 00 34 8c fd 68 40 08 37d+02:40:52.644 READ FPDMA QUEUED
SMART Extended Self-test Log Version: 1 (1 sectors)
Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
# 1 Extended offline Completed without error 00% 38335 -
# 2 Extended offline Completed: read failure 90% 38171 881652578
# 3 Extended offline Completed: read failure 90% 38100 881652578
# 4 Extended offline Completed without error 00% 38005 -
# 5 Extended offline Completed without error 00% 37838 -
# 6 Extended offline Completed: read failure 90% 37668 881652578
# 7 Extended offline Completed without error 00% 37502 -
# 8 Extended offline Completed: read failure 90% 37332 881652578
# 9 Extended offline Completed: read failure 90% 37165 881652578
#10 Extended offline Completed: read failure 10% 36998 881652578
#11 Extended offline Completed without error 00% 36831 -
#12 Extended offline Completed: read failure 90% 36662 881652578
#13 Extended offline Completed without error 00% 36497 -
#14 Extended offline Completed without error 00% 36329 -
#15 Extended offline Completed: read failure 10% 36161 881652578
#16 Extended offline Completed without error 00% 35994 -
#17 Extended offline Completed without error 00% 35826 -
#18 Extended offline Completed: read failure 10% 35658 881652578
9 of 9 failed self-tests are outdated by newer successful extended offline self-test # 1
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
SCT Status Version: 3
SCT Version (vendor specific): 258 (0x0102)
Device State: Active (0)
Current Temperature: 49 Celsius
Power Cycle Min/Max Temperature: 37/55 Celsius
Lifetime Min/Max Temperature: 0/62 Celsius
Under/Over Temperature Limit Count: 0/0
SCT Temperature History Version: 2
Temperature Sampling Period: 1 minute
Temperature Logging Interval: 1 minute
Min/Max recommended Temperature: 0/60 Celsius
Min/Max Temperature Limit: -41/85 Celsius
Temperature History Size (Index): 128 (4)
SCT Error Recovery Control:
Read: 85 (8.5 seconds)
Write: 85 (8.5 seconds)
Device Statistics (GP/SMART Log 0x04) not supported
Pending Defects log (GP Log 0x0c) not supported
SATA Phy Event Counters (GP Log 0x11)
ID Size Value Description
0x0001 2 0 Command failed due to ICRC error
0x0002 2 0 R_ERR response for data FIS
0x0003 2 0 R_ERR response for device-to-host data FIS
0x0004 2 0 R_ERR response for host-to-device data FIS
0x0005 2 0 R_ERR response for non-data FIS
0x0006 2 0 R_ERR response for device-to-host non-data FIS
0x0007 2 0 R_ERR response for host-to-device non-data FIS
0x000a 2 2 Device-to-host register FISes sent due to a COMRESET
0x000b 2 0 CRC errors within host-to-device FIS
0x8000 4 736651 Vendor specific
View Git Blame Copy Permalink