mirror of
https://github.com/bsdhw/SMART.git
synced 2025-05-31 16:21:41 +05:30
117 lines
6.2 KiB
Plaintext
117 lines
6.2 KiB
Plaintext
smartctl 7.1 2019-12-30 r5022 [x86_64-unknown-openbsd6.8] (local build)
|
|
Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org
|
|
|
|
=== START OF INFORMATION SECTION ===
|
|
Model Family: Western Digital Blue
|
|
Device Model: WDC WD5000AAKX-603CA0
|
|
Serial Number: --
|
|
LU WWN Device Id: 5 0014ee ...
|
|
Firmware Version: 18.01H18
|
|
User Capacity: 500,107,862,016 bytes [500 GB]
|
|
Sector Size: 512 bytes logical/physical
|
|
Rotation Rate: 7200 rpm
|
|
Form Factor: 3.5 inches
|
|
Device is: In smartctl database [for details use: -P show]
|
|
ATA Version is: ATA8-ACS (minor revision not indicated)
|
|
SATA Version is: SATA 3.0, 6.0 Gb/s (current: 3.0 Gb/s)
|
|
Local Time is: Sun Oct 25 10:59:17 2020 EDT
|
|
SMART support is: Available - device has SMART capability.
|
|
SMART support is: Enabled
|
|
|
|
=== START OF READ SMART DATA SECTION ===
|
|
SMART Status not supported: Incomplete response, ATA output registers missing
|
|
SMART overall-health self-assessment test result: PASSED
|
|
Warning: This result is based on an Attribute check.
|
|
|
|
General SMART Values:
|
|
Offline data collection status: (0x82) Offline data collection activity
|
|
was completed without error.
|
|
Auto Offline Data Collection: Enabled.
|
|
Self-test execution status: ( 0) The previous self-test routine completed
|
|
without error or no self-test has ever
|
|
been run.
|
|
Total time to complete Offline
|
|
data collection: ( 7980) seconds.
|
|
Offline data collection
|
|
capabilities: (0x5b) SMART execute Offline immediate.
|
|
Auto Offline data collection on/off support.
|
|
Suspend Offline collection upon new
|
|
command.
|
|
Offline surface scan supported.
|
|
Self-test supported.
|
|
No Conveyance Self-test supported.
|
|
Selective Self-test supported.
|
|
SMART capabilities: (0x0003) Saves SMART data before entering
|
|
power-saving mode.
|
|
Supports SMART auto save timer.
|
|
Error logging capability: (0x01) Error logging supported.
|
|
General Purpose Logging supported.
|
|
Short self-test routine
|
|
recommended polling time: ( 2) minutes.
|
|
Extended self-test routine
|
|
recommended polling time: ( 81) minutes.
|
|
SCT capabilities: (0x303f) SCT Status supported.
|
|
SCT Error Recovery Control supported.
|
|
SCT Feature Control supported.
|
|
SCT Data Table supported.
|
|
|
|
SMART Attributes Data Structure revision number: 16
|
|
Vendor Specific SMART Attributes with Thresholds:
|
|
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
|
|
1 Raw_Read_Error_Rate 0x002f 200 200 051 Pre-fail Always - 1
|
|
3 Spin_Up_Time 0x0027 141 138 021 Pre-fail Always - 3933
|
|
4 Start_Stop_Count 0x0032 084 084 000 Old_age Always - 16686
|
|
5 Reallocated_Sector_Ct 0x0033 200 200 140 Pre-fail Always - 0
|
|
7 Seek_Error_Rate 0x002f 200 200 051 Pre-fail Always - 0
|
|
9 Power_On_Hours 0x0032 040 040 000 Old_age Always - 43866
|
|
10 Spin_Retry_Count 0x0033 100 100 051 Pre-fail Always - 0
|
|
11 Calibration_Retry_Count 0x0032 100 100 000 Old_age Always - 0
|
|
12 Power_Cycle_Count 0x0032 084 084 000 Old_age Always - 16291
|
|
184 End-to-End_Error 0x0033 100 100 097 Pre-fail Always - 0
|
|
187 Reported_Uncorrect 0x0032 100 100 000 Old_age Always - 0
|
|
188 Command_Timeout 0x0032 100 099 000 Old_age Always - 2
|
|
190 Airflow_Temperature_Cel 0x0022 063 047 040 Old_age Always - 37 (Min/Max 33/47)
|
|
192 Power-Off_Retract_Count 0x0032 199 199 000 Old_age Always - 790
|
|
193 Load_Cycle_Count 0x0032 195 195 000 Old_age Always - 15895
|
|
196 Reallocated_Event_Count 0x0032 200 200 000 Old_age Always - 0
|
|
197 Current_Pending_Sector 0x0032 200 200 000 Old_age Always - 0
|
|
198 Offline_Uncorrectable 0x0030 200 200 000 Old_age Offline - 0
|
|
199 UDMA_CRC_Error_Count 0x0032 200 200 000 Old_age Always - 0
|
|
200 Multi_Zone_Error_Rate 0x0008 200 200 000 Old_age Offline - 0
|
|
|
|
SMART Error Log Version: 1
|
|
No Errors Logged
|
|
|
|
SMART Self-test log structure revision number 1
|
|
Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
|
|
# 1 Short offline Completed without error 00% 38034 -
|
|
# 2 Short offline Completed without error 00% 28570 -
|
|
# 3 Short offline Completed without error 00% 25720 -
|
|
# 4 Short offline Completed without error 00% 16403 -
|
|
# 5 Short offline Completed without error 00% 11827 -
|
|
# 6 Short offline Completed without error 00% 11679 -
|
|
# 7 Short offline Completed without error 00% 11400 -
|
|
# 8 Short offline Completed without error 00% 10958 -
|
|
# 9 Short offline Completed without error 00% 10924 -
|
|
#10 Short offline Completed without error 00% 10788 -
|
|
#11 Short offline Completed without error 00% 10722 -
|
|
#12 Short offline Completed without error 00% 10667 -
|
|
#13 Short offline Completed without error 00% 10637 -
|
|
#14 Short offline Completed without error 00% 10628 -
|
|
#15 Short offline Completed without error 00% 10566 -
|
|
#16 Short offline Completed without error 00% 10531 -
|
|
#17 Short offline Interrupted (host reset) 60% 1080 -
|
|
#18 Extended offline Interrupted (host reset) 90% 1 -
|
|
|
|
SMART Selective self-test log data structure revision number 1
|
|
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
|
|
1 0 0 Not_testing
|
|
2 0 0 Not_testing
|
|
3 0 0 Not_testing
|
|
4 0 0 Not_testing
|
|
5 0 0 Not_testing
|
|
Selective self-test flags (0x0):
|
|
After scanning selected spans, do NOT read-scan remainder of disk.
|
|
If Selective self-test is pending on power-up, resume after 0 minute delay.
|
|
|