80486DX2-66/SMART-open-study
1
0
Fork 0
mirror of https://github.com/bsdhw/SMART.git synced 2025-05-31 16:21:41 +05:30
Code Issues Activity
Files
master
SMART-open-study/HDD/WDC/WD5000/WD5000AVCS-632DY1/84DDD1DB8C60
Andrey Ponomarenko d96e63400c Update of reports (new: 3084, modified: 0)
2021-05-18 23:01:35 +03:00

315 lines
16 KiB
Plaintext
Raw Permalink Blame History

smartctl 7.1 2019-12-30 r5022 [FreeBSD 12.1-RELEASE amd64] (local build)
Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Model Family: Western Digital AV-GP
Device Model: WDC WD5000AVCS-632DY1
Serial Number: --
LU WWN Device Id: 5 0014ee ...
Firmware Version: 01.00A01
User Capacity: 500,107,862,016 bytes [500 GB]
Sector Size: 512 bytes logical/physical
Device is: In smartctl database [for details use: -P show]
ATA Version is: ATA8-ACS (minor revision not indicated)
SATA Version is: SATA 2.6, 3.0 Gb/s
Local Time is: Wed Feb 10 13:02:58 2021 EST
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
AAM level is: 128 (quiet), recommended: 128
APM feature is: Unavailable
Rd look-ahead is: Enabled
Write cache is: Enabled
DSN feature is: Unavailable
ATA Security is: Disabled, frozen [SEC2]
Wt Cache Reorder: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x00) Offline data collection activity
was never started.
Auto Offline Data Collection: Disabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: (12000) seconds.
Offline data collection
capabilities: (0x7b) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 2) minutes.
Extended self-test routine
recommended polling time: ( 140) minutes.
Conveyance self-test routine
recommended polling time: ( 5) minutes.
SCT capabilities: (0x3037) SCT Status supported.
SCT Feature Control supported.
SCT Data Table supported.
SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE
1 Raw_Read_Error_Rate POSR-K 200 200 051 - 557
3 Spin_Up_Time POS--K 188 186 021 - 3566
4 Start_Stop_Count -O--CK 098 098 000 - 2188
5 Reallocated_Sector_Ct PO--CK 200 200 140 - 0
7 Seek_Error_Rate -OSR-K 100 253 000 - 0
9 Power_On_Hours -O--CK 056 056 000 - 32501
10 Spin_Retry_Count -O--CK 100 100 000 - 0
11 Calibration_Retry_Count -O--CK 100 100 000 - 0
12 Power_Cycle_Count -O--CK 099 099 000 - 1775
192 Power-Off_Retract_Count -O--CK 200 200 000 - 598
193 Load_Cycle_Count -O--CK 200 200 000 - 1589
194 Temperature_Celsius -O---K 109 093 000 - 34
196 Reallocated_Event_Count -O--CK 200 200 000 - 0
197 Current_Pending_Sector -O--CK 200 200 000 - 0
198 Offline_Uncorrectable ----CK 100 253 000 - 0
199 UDMA_CRC_Error_Count -O--CK 200 200 000 - 10875
200 Multi_Zone_Error_Rate ---R-- 100 253 000 - 0
||||||_ K auto-keep
|||||__ C event count
||||___ R error rate
|||____ S speed/performance
||_____ O updated online
|______ P prefailure warning
General Purpose Log Directory Version 1
SMART Log Directory Version 1 [multi-sector log support]
Address Access R/W Size Description
0x00 GPL,SL R/O 1 Log Directory
0x01 SL R/O 1 Summary SMART error log
0x02 SL R/O 5 Comprehensive SMART error log
0x03 GPL R/O 6 Ext. Comprehensive SMART error log
0x06 SL R/O 1 SMART self-test log
0x07 GPL R/O 1 Extended self-test log
0x09 SL R/W 1 Selective self-test log
0x10 GPL R/O 1 NCQ Command Error log
0x11 GPL R/O 1 SATA Phy Event Counters log
0x21 GPL R/O 1 Write stream error log
0x22 GPL R/O 1 Read stream error log
0x80-0x9f GPL,SL R/W 16 Host vendor specific log
0xa0-0xa7 GPL,SL VS 16 Device vendor specific log
0xa8-0xb7 GPL,SL VS 1 Device vendor specific log
0xbd GPL,SL VS 1 Device vendor specific log
0xc0 GPL,SL VS 1 Device vendor specific log
0xc1 GPL VS 24 Device vendor specific log
0xe0 GPL,SL R/W 1 SCT Command/Status
0xe1 GPL,SL R/W 1 SCT Data Transfer
SMART Extended Comprehensive Error Log Version: 1 (6 sectors)
Device Error Count: 631 (device log contains only the most recent 24 errors)
CR = Command Register
FEATR = Features Register
COUNT = Count (was: Sector Count) Register
LBA_48 = Upper bytes of LBA High/Mid/Low Registers ] ATA-8
LH = LBA High (was: Cylinder High) Register ] LBA
LM = LBA Mid (was: Cylinder Low) Register ] Register
LL = LBA Low (was: Sector Number) Register ]
DV = Device (was: Device/Head) Register
DC = Device Control Register
ER = Error register
ST = Status register
Powered_Up_Time is measured from power on, and printed as
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
SS=sec, and sss=millisec. It "wraps" after 49.710 days.
Error 631 [6] occurred at disk power-on lifetime: 31192 hours (1299 days + 16 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
40 -- 51 00 80 00 00 06 56 6e 9a e0 00 Error: UNC 128 sectors at LBA = 0x06566e9a = 106327706
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
25 00 00 00 80 00 00 06 56 6e 80 e0 00 01:32:19.074 READ DMA EXT
25 00 00 00 80 00 00 06 56 6e 00 e0 00 01:32:19.048 READ DMA EXT
25 00 00 00 08 00 00 00 63 ed 58 e0 00 01:32:19.047 READ DMA EXT
25 00 00 00 10 00 00 00 63 ec d0 e0 00 01:32:19.029 READ DMA EXT
25 00 00 00 08 00 00 01 67 ae e0 e0 00 01:32:19.029 READ DMA EXT
Error 630 [5] occurred at disk power-on lifetime: 31191 hours (1299 days + 15 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
40 -- 51 00 80 00 00 06 56 6e 9a e0 00 Error: UNC 128 sectors at LBA = 0x06566e9a = 106327706
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
25 00 00 00 80 00 00 06 56 6e 80 e0 00 00:53:54.489 READ DMA EXT
25 00 00 00 80 00 00 06 56 6e 00 e0 00 00:53:54.469 READ DMA EXT
25 00 00 00 08 00 00 07 c5 c7 f0 e0 00 00:53:54.469 READ DMA EXT
25 00 00 00 08 00 00 07 c5 c7 e0 e0 00 00:53:54.469 READ DMA EXT
25 00 00 00 08 00 00 07 c5 c7 90 e0 00 00:53:54.441 READ DMA EXT
Error 629 [4] occurred at disk power-on lifetime: 31191 hours (1299 days + 15 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
40 -- 51 01 00 00 00 06 56 6e 9a e0 00 Error: UNC 256 sectors at LBA = 0x06566e9a = 106327706
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
25 00 00 01 00 00 00 06 56 6e 00 e0 00 00:50:05.368 READ DMA EXT
35 00 00 00 08 00 00 00 00 7d 50 e0 00 00:50:05.368 WRITE DMA EXT
25 00 00 00 04 00 00 07 c5 c5 0c e0 00 00:50:05.367 READ DMA EXT
35 00 00 00 04 00 00 07 c5 c5 0c e0 00 00:50:05.367 WRITE DMA EXT
25 00 00 00 3d 00 00 00 00 13 f9 e0 00 00:50:05.367 READ DMA EXT
Error 628 [3] occurred at disk power-on lifetime: 31191 hours (1299 days + 15 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
40 -- 51 01 00 00 00 06 56 6e 9a e0 00 Error: UNC 256 sectors at LBA = 0x06566e9a = 106327706
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
25 00 00 01 00 00 00 06 56 6e 00 e0 00 00:50:02.665 READ DMA EXT
25 00 00 00 05 00 00 00 00 09 18 e0 00 00:50:02.665 READ DMA EXT
25 00 00 00 02 00 00 06 56 6e e8 e0 00 00:50:02.644 READ DMA EXT
25 00 00 00 09 00 00 00 00 35 18 e0 00 00:50:02.630 READ DMA EXT
25 00 00 01 00 00 00 06 56 6e 00 e0 00 00:49:59.977 READ DMA EXT
Error 627 [2] occurred at disk power-on lifetime: 31191 hours (1299 days + 15 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
40 -- 51 01 00 00 00 06 56 6e 9a e0 00 Error: UNC 256 sectors at LBA = 0x06566e9a = 106327706
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
25 00 00 01 00 00 00 06 56 6e 00 e0 00 00:49:59.977 READ DMA EXT
25 00 00 00 04 00 00 00 00 8d 40 e0 00 00:49:59.971 READ DMA EXT
25 00 00 00 0c 00 00 06 56 6c e2 e0 00 00:49:59.971 READ DMA EXT
35 00 00 00 0c 00 00 06 56 6c e2 e0 00 00:49:59.971 WRITE DMA EXT
25 00 00 00 02 00 00 06 50 f1 aa e0 00 00:49:59.970 READ DMA EXT
Error 626 [1] occurred at disk power-on lifetime: 31191 hours (1299 days + 15 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
40 -- 51 01 00 00 00 06 56 6e 9a e0 00 Error: UNC 256 sectors at LBA = 0x06566e9a = 106327706
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
25 00 00 01 00 00 00 06 56 6e 00 e0 00 00:49:57.436 READ DMA EXT
ea 00 00 00 00 56 6c ed 00 00 00 e0 00 00:49:57.407 FLUSH CACHE EXT
25 00 00 00 0c 00 00 06 56 6c e2 e0 00 00:49:57.407 READ DMA EXT
35 00 00 00 08 00 00 00 00 7d 40 e0 00 00:49:57.407 WRITE DMA EXT
35 00 00 00 0c 00 00 06 56 6c e2 e0 00 00:49:57.407 WRITE DMA EXT
Error 625 [0] occurred at disk power-on lifetime: 31191 hours (1299 days + 15 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
40 -- 51 01 00 00 00 06 56 6e 9a e0 00 Error: UNC 256 sectors at LBA = 0x06566e9a = 106327706
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
25 00 00 01 00 00 00 06 56 6e 00 e0 00 00:49:54.202 READ DMA EXT
25 00 00 00 08 00 00 00 00 7d 58 e0 00 00:49:54.201 READ DMA EXT
25 00 00 00 02 00 00 06 56 6e dc e0 00 00:49:54.190 READ DMA EXT
25 00 00 00 08 00 00 00 00 7d 48 e0 00 00:49:54.190 READ DMA EXT
25 00 00 01 00 00 00 06 56 6e 00 e0 00 00:49:51.730 READ DMA EXT
Error 624 [23] occurred at disk power-on lifetime: 31191 hours (1299 days + 15 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
40 -- 51 01 00 00 00 06 56 6e 9a e0 00 Error: UNC 256 sectors at LBA = 0x06566e9a = 106327706
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
25 00 00 01 00 00 00 06 56 6e 00 e0 00 00:49:51.730 READ DMA EXT
25 00 00 00 08 00 00 00 00 7d 40 e0 00 00:49:51.718 READ DMA EXT
25 00 00 00 0c 00 00 06 56 6c e2 e0 00 00:49:51.717 READ DMA EXT
25 00 00 00 08 00 00 00 00 08 10 e0 00 00:49:51.717 READ DMA EXT
35 00 00 00 0c 00 00 06 56 6c e2 e0 00 00:49:51.717 WRITE DMA EXT
SMART Extended Self-test Log Version: 1 (1 sectors)
Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
# 1 Short offline Completed without error 00% 16 -
# 2 Short offline Completed without error 00% 0 -
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
SCT Status Version: 3
SCT Version (vendor specific): 258 (0x0102)
Device State: Active (0)
Current Temperature: 34 Celsius
Power Cycle Min/Max Temperature: 30/35 Celsius
Lifetime Min/Max Temperature: 0/50 Celsius
Under/Over Temperature Limit Count: 0/0
SCT Temperature History Version: 2
Temperature Sampling Period: 1 minute
Temperature Logging Interval: 1 minute
Min/Max recommended Temperature: 0/60 Celsius
Min/Max Temperature Limit: -41/85 Celsius
Temperature History Size (Index): 478 (380)
SCT Error Recovery Control command not supported
Device Statistics (GP/SMART Log 0x04) not supported
Pending Defects log (GP Log 0x0c) not supported
SATA Phy Event Counters (GP Log 0x11)
ID Size Value Description
0x0001 2 0 Command failed due to ICRC error
0x0002 2 0 R_ERR response for data FIS
0x0003 2 0 R_ERR response for device-to-host data FIS
0x0004 2 0 R_ERR response for host-to-device data FIS
0x0005 2 0 R_ERR response for non-data FIS
0x0006 2 0 R_ERR response for device-to-host non-data FIS
0x0007 2 0 R_ERR response for host-to-device non-data FIS
0x000a 2 15 Device-to-host register FISes sent due to a COMRESET
0x000b 2 0 CRC errors within host-to-device FIS
0x8000 4 10539 Vendor specific
View Git Blame Copy Permalink