80486DX2-66/SMART-open-study
1
0
Fork 0
mirror of https://github.com/bsdhw/SMART.git synced 2025-05-31 16:21:41 +05:30
Code Issues Activity
Files
master
SMART-open-study/HDD/WDC/WD5000/WD5000LPLX-22ZNTT0/6FB7DE9B5E26
Andrey Ponomarenko 2a811b67c1 Update of reports (new: 6895, modified: 16)
2025-01-05 01:57:11 +03:00

338 lines
17 KiB
Plaintext
Raw Permalink Blame History

smartctl 7.3 2022-02-28 r5338 [FreeBSD 13.1-RELEASE-p8 amd64] (local build)
Copyright (C) 2002-22, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Model Family: Western Digital Black Mobile
Device Model: WDC WD5000LPLX-22ZNTT0
Serial Number: --
LU WWN Device Id: 5 0014ee ...
Firmware Version: 01.01A01
User Capacity: 500,107,862,016 bytes [500 GB]
Sector Sizes: 512 bytes logical, 4096 bytes physical
Rotation Rate: 7200 rpm
Device is: In smartctl database 7.3/5319
ATA Version is: ACS-2, ACS-3 T13/2161-D revision 3b
SATA Version is: SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s)
Local Time is: Mon Jul 3 08:24:37 2023 UTC
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
AAM feature is: Unavailable
APM level is: 128 (minimum power consumption without standby)
Rd look-ahead is: Enabled
Write cache is: Enabled
DSN feature is: Unavailable
ATA Security is: Disabled, frozen [SEC2]
Wt Cache Reorder: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x84) Offline data collection activity
was suspended by an interrupting command from host.
Auto Offline Data Collection: Enabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: ( 6780) seconds.
Offline data collection
capabilities: (0x7b) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 2) minutes.
Extended self-test routine
recommended polling time: ( 80) minutes.
Conveyance self-test routine
recommended polling time: ( 5) minutes.
SCT capabilities: (0x3035) SCT Status supported.
SCT Feature Control supported.
SCT Data Table supported.
SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE
1 Raw_Read_Error_Rate POSR-K 200 193 051 - 0
3 Spin_Up_Time POS--K 142 141 021 - 1900
4 Start_Stop_Count -O--CK 100 100 000 - 54
5 Reallocated_Sector_Ct PO--CK 200 200 140 - 0
7 Seek_Error_Rate -OSR-K 200 200 000 - 0
9 Power_On_Hours -O--CK 030 030 000 - 51707
10 Spin_Retry_Count -O--CK 100 253 000 - 0
11 Calibration_Retry_Count -O--CK 100 253 000 - 0
12 Power_Cycle_Count -O--CK 100 100 000 - 54
192 Power-Off_Retract_Count -O--CK 200 200 000 - 38
193 Load_Cycle_Count -O--CK 197 197 000 - 9795
194 Temperature_Celsius -O---K 112 095 000 - 31
196 Reallocated_Event_Count -O--CK 200 200 000 - 0
197 Current_Pending_Sector -O--CK 200 200 000 - 0
198 Offline_Uncorrectable ----CK 200 200 000 - 0
199 UDMA_CRC_Error_Count -O--CK 200 200 000 - 0
200 Multi_Zone_Error_Rate ---R-- 200 200 000 - 0
||||||_ K auto-keep
|||||__ C event count
||||___ R error rate
|||____ S speed/performance
||_____ O updated online
|______ P prefailure warning
General Purpose Log Directory Version 1
SMART Log Directory Version 1 [multi-sector log support]
Address Access R/W Size Description
0x00 GPL,SL R/O 1 Log Directory
0x01 SL R/O 1 Summary SMART error log
0x02 SL R/O 5 Comprehensive SMART error log
0x03 GPL R/O 6 Ext. Comprehensive SMART error log
0x06 SL R/O 1 SMART self-test log
0x07 GPL R/O 1 Extended self-test log
0x09 SL R/W 1 Selective self-test log
0x10 GPL R/O 1 NCQ Command Error log
0x11 GPL R/O 1 SATA Phy Event Counters log
0x80-0x9f GPL,SL R/W 16 Host vendor specific log
0xa0-0xa7 GPL,SL VS 16 Device vendor specific log
0xa8-0xb6 GPL,SL VS 1 Device vendor specific log
0xb7 GPL,SL VS 37 Device vendor specific log
0xbd GPL,SL VS 1 Device vendor specific log
0xc0 GPL,SL VS 1 Device vendor specific log
0xc1 GPL VS 93 Device vendor specific log
0xe0 GPL,SL R/W 1 SCT Command/Status
0xe1 GPL,SL R/W 1 SCT Data Transfer
SMART Extended Comprehensive Error Log Version: 1 (6 sectors)
Device Error Count: 365 (device log contains only the most recent 24 errors)
CR = Command Register
FEATR = Features Register
COUNT = Count (was: Sector Count) Register
LBA_48 = Upper bytes of LBA High/Mid/Low Registers ] ATA-8
LH = LBA High (was: Cylinder High) Register ] LBA
LM = LBA Mid (was: Cylinder Low) Register ] Register
LL = LBA Low (was: Sector Number) Register ]
DV = Device (was: Device/Head) Register
DC = Device Control Register
ER = Error register
ST = Status register
Powered_Up_Time is measured from power on, and printed as
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
SS=sec, and sss=millisec. It "wraps" after 49.710 days.
Error 365 [4] occurred at disk power-on lifetime: 35383 hours (1474 days + 7 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
40 -- 51 00 00 00 00 2a f8 5a 80 40 00 Error: UNC at LBA = 0x2af85a80 = 720919168
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
60 00 40 00 10 00 00 2a c5 67 a8 40 08 1d+22:40:01.794 READ FPDMA QUEUED
60 00 40 00 08 00 00 2a c5 61 28 40 08 1d+22:40:01.794 READ FPDMA QUEUED
60 00 40 00 00 00 00 2a c4 53 a8 40 08 1d+22:40:01.794 READ FPDMA QUEUED
60 00 40 00 f8 00 00 2a c4 9d a8 40 08 1d+22:40:01.794 READ FPDMA QUEUED
60 00 40 00 f0 00 00 2a c4 b8 a8 40 08 1d+22:40:01.794 READ FPDMA QUEUED
Error 364 [3] occurred at disk power-on lifetime: 35383 hours (1474 days + 7 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
40 -- 51 00 00 00 00 2a f8 5a 80 40 00 Error: WP at LBA = 0x2af85a80 = 720919168
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
61 00 40 00 d0 00 00 2a c4 dd a8 40 08 1d+22:39:58.705 WRITE FPDMA QUEUED
61 00 40 00 c8 00 00 2a c4 dd 28 40 08 1d+22:39:58.700 WRITE FPDMA QUEUED
61 00 40 00 c0 00 00 2a c5 53 a8 40 08 1d+22:39:58.681 WRITE FPDMA QUEUED
61 00 40 00 b8 00 00 2a c5 8c a8 40 08 1d+22:39:58.681 WRITE FPDMA QUEUED
60 00 40 00 b0 00 00 2a c5 67 a8 40 08 1d+22:39:58.681 READ FPDMA QUEUED
Error 363 [2] occurred at disk power-on lifetime: 35383 hours (1474 days + 7 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
40 -- 51 00 00 00 00 2a f8 5a 80 40 00 Error: UNC at LBA = 0x2af85a80 = 720919168
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
60 00 40 00 38 00 00 2a c5 61 28 40 08 1d+22:39:55.624 READ FPDMA QUEUED
60 00 40 00 30 00 00 2a c4 53 a8 40 08 1d+22:39:55.621 READ FPDMA QUEUED
60 00 40 00 28 00 00 2a c4 9c 28 40 08 1d+22:39:55.612 READ FPDMA QUEUED
61 00 08 00 20 00 00 2a b9 b1 c8 40 08 1d+22:39:55.606 WRITE FPDMA QUEUED
61 00 80 00 18 00 00 2b d9 79 a8 40 08 1d+22:39:55.606 WRITE FPDMA QUEUED
Error 362 [1] occurred at disk power-on lifetime: 35383 hours (1474 days + 7 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
40 -- 51 00 00 00 00 2a f8 5a 80 40 00 Error: UNC at LBA = 0x2af85a80 = 720919168
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
60 00 40 00 40 00 00 2a c5 a0 28 40 08 1d+22:39:52.506 READ FPDMA QUEUED
60 00 40 00 38 00 00 2a c4 99 a8 40 08 1d+22:39:52.500 READ FPDMA QUEUED
60 00 40 00 30 00 00 2a c3 19 a8 40 08 1d+22:39:52.493 READ FPDMA QUEUED
60 00 40 00 28 00 00 2a bf 50 a8 40 08 1d+22:39:52.485 READ FPDMA QUEUED
60 00 40 00 20 00 00 2a bf 51 a8 40 08 1d+22:39:52.482 READ FPDMA QUEUED
Error 361 [0] occurred at disk power-on lifetime: 35383 hours (1474 days + 7 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
40 -- 51 00 00 00 00 2a f8 5a 80 40 00 Error: UNC at LBA = 0x2af85a80 = 720919168
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
60 00 80 00 58 00 00 2a f8 5a 68 40 08 1d+22:39:49.380 READ FPDMA QUEUED
61 00 40 00 50 00 00 2a c7 1f 28 40 08 1d+22:39:49.380 WRITE FPDMA QUEUED
61 00 40 00 48 00 00 2a c7 1e 28 40 08 1d+22:39:49.372 WRITE FPDMA QUEUED
60 00 40 00 40 00 00 2a c7 0d a8 40 08 1d+22:39:49.372 READ FPDMA QUEUED
61 00 40 00 38 00 00 2a c5 d9 28 40 08 1d+22:39:49.365 WRITE FPDMA QUEUED
Error 360 [23] occurred at disk power-on lifetime: 35383 hours (1474 days + 7 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
40 -- 51 00 00 00 00 2a f8 5a 80 40 00 Error: WP at LBA = 0x2af85a80 = 720919168
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
61 00 40 00 f8 00 00 2b 0c b9 e8 40 08 1d+22:39:45.854 WRITE FPDMA QUEUED
61 00 80 00 f0 00 00 2b 0c b7 e8 40 08 1d+22:39:45.854 WRITE FPDMA QUEUED
61 00 40 00 e8 00 00 2b 0c c3 e8 40 08 1d+22:39:45.850 WRITE FPDMA QUEUED
61 00 40 00 e0 00 00 2b 0c c2 68 40 08 1d+22:39:45.847 WRITE FPDMA QUEUED
61 00 40 00 d8 00 00 2b 0c c1 e8 40 08 1d+22:39:45.845 WRITE FPDMA QUEUED
Error 359 [22] occurred at disk power-on lifetime: 35383 hours (1474 days + 7 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
40 -- 51 00 00 00 00 2a f8 5a 80 40 00 Error: UNC at LBA = 0x2af85a80 = 720919168
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
60 00 40 00 f8 00 00 2a c4 9b a8 40 08 1d+22:39:42.702 READ FPDMA QUEUED
60 00 40 00 f0 00 00 2a c4 e6 a8 40 08 1d+22:39:42.696 READ FPDMA QUEUED
60 00 40 00 e8 00 00 2a c4 e6 28 40 08 1d+22:39:42.696 READ FPDMA QUEUED
60 00 40 00 e0 00 00 2a c4 e7 28 40 08 1d+22:39:42.694 READ FPDMA QUEUED
60 00 40 00 d8 00 00 2a c2 f7 28 40 08 1d+22:39:42.692 READ FPDMA QUEUED
Error 358 [21] occurred at disk power-on lifetime: 35383 hours (1474 days + 7 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
40 -- 51 00 00 00 00 2a f8 5a 80 40 00 Error: UNC at LBA = 0x2af85a80 = 720919168
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
60 00 40 00 10 00 00 2a c2 f6 a8 40 08 1d+22:39:39.553 READ FPDMA QUEUED
61 00 40 00 08 00 00 2a bb 2a e8 40 08 1d+22:39:39.543 WRITE FPDMA QUEUED
61 00 40 00 00 00 00 2a bb 27 e8 40 08 1d+22:39:39.543 WRITE FPDMA QUEUED
61 00 40 00 f8 00 00 2a bb 25 28 40 08 1d+22:39:39.543 WRITE FPDMA QUEUED
61 00 40 00 e8 00 00 2a bb 22 a8 40 08 1d+22:39:39.543 WRITE FPDMA QUEUED
SMART Extended Self-test Log Version: 1 (1 sectors)
Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
# 1 Short offline Completed without error 00% 51699 -
# 2 Short offline Completed without error 00% 51675 -
# 3 Extended offline Interrupted (host reset) 10% 51653 -
# 4 Short offline Completed without error 00% 51651 -
# 5 Short offline Completed without error 00% 51627 -
# 6 Short offline Completed without error 00% 51603 -
# 7 Short offline Completed without error 00% 51579 -
# 8 Short offline Completed without error 00% 51555 -
# 9 Short offline Completed without error 00% 51531 -
#10 Short offline Completed without error 00% 51507 -
#11 Extended offline Completed without error 00% 51486 -
#12 Short offline Completed without error 00% 51483 -
#13 Short offline Completed without error 00% 51459 -
#14 Short offline Completed without error 00% 51435 -
#15 Short offline Completed without error 00% 51411 -
#16 Short offline Completed without error 00% 51387 -
#17 Short offline Completed without error 00% 51363 -
#18 Short offline Completed without error 00% 51339 -
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
SCT Status Version: 3
SCT Version (vendor specific): 258 (0x0102)
Device State: Active (0)
Current Temperature: 32 Celsius
Power Cycle Min/Max Temperature: 26/38 Celsius
Lifetime Min/Max Temperature: 26/50 Celsius
Under/Over Temperature Limit Count: 0/0
Vendor specific:
01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
SCT Temperature History Version: 2
Temperature Sampling Period: 1 minute
Temperature Logging Interval: 1 minute
Min/Max recommended Temperature: 0/60 Celsius
Min/Max Temperature Limit: -41/85 Celsius
Temperature History Size (Index): 128 (96)
SCT Error Recovery Control command not supported
Device Statistics (GP/SMART Log 0x04) not supported
Pending Defects log (GP Log 0x0c) not supported
SATA Phy Event Counters (GP Log 0x11)
ID Size Value Description
0x0001 2 0 Command failed due to ICRC error
0x0002 2 0 R_ERR response for data FIS
0x0003 2 0 R_ERR response for device-to-host data FIS
0x0004 2 0 R_ERR response for host-to-device data FIS
0x0005 2 0 R_ERR response for non-data FIS
0x0006 2 0 R_ERR response for device-to-host non-data FIS
0x0007 2 0 R_ERR response for host-to-device non-data FIS
0x0008 2 0 Device-to-host non-data FIS retries
0x0009 2 98 Transition from drive PhyRdy to drive PhyNRdy
0x000a 2 99 Device-to-host register FISes sent due to a COMRESET
0x000b 2 0 CRC errors within host-to-device FIS
0x000f 2 0 R_ERR response for host-to-device data FIS, CRC
0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC
0x8000 4 8366479 Vendor specific
View Git Blame Copy Permalink