80486DX2-66/SMART-open-study
1
0
Fork 0
mirror of https://github.com/bsdhw/SMART.git synced 2025-05-31 16:21:41 +05:30
Code Issues Activity
Files
master
SMART-open-study/HDD/WDC/WD60/WD60EFRX-68L0BN1/01FA8438879B
Andrey Ponomarenko 51569f7bd1 Update of reports (new: 1098, modified: 0)
2020-11-03 14:43:05 +03:00

347 lines
18 KiB
Plaintext
Raw Permalink Blame History

smartctl 7.0 2018-12-30 r4883 [FreeBSD 11.3-RELEASE-p7 amd64] (local build)
Copyright (C) 2002-18, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Model Family: Western Digital Red
Device Model: WDC WD60EFRX-68L0BN1
Serial Number: --
LU WWN Device Id: 5 0014ee ...
Firmware Version: 82.00A82
User Capacity: 6,001,175,126,016 bytes [6.00 TB]
Sector Sizes: 512 bytes logical, 4096 bytes physical
Rotation Rate: 5700 rpm
Device is: In smartctl database [for details use: -P show]
ATA Version is: ACS-2, ACS-3 T13/2161-D revision 3b
SATA Version is: SATA 3.1, 6.0 Gb/s (current: 3.0 Gb/s)
Local Time is: Thu Oct 29 15:56:16 2020 CET
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
AAM feature is: Unavailable
APM feature is: Unavailable
Rd look-ahead is: Enabled
Write cache is: Enabled
DSN feature is: Unavailable
ATA Security is: Disabled, NOT FROZEN [SEC1]
Wt Cache Reorder: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x00) Offline data collection activity
was never started.
Auto Offline Data Collection: Disabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: ( 6164) seconds.
Offline data collection
capabilities: (0x7b) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 2) minutes.
Extended self-test routine
recommended polling time: ( 715) minutes.
Conveyance self-test routine
recommended polling time: ( 5) minutes.
SCT capabilities: (0x303d) SCT Status supported.
SCT Error Recovery Control supported.
SCT Feature Control supported.
SCT Data Table supported.
SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE
1 Raw_Read_Error_Rate POSR-K 200 200 051 - 0
3 Spin_Up_Time POS--K 197 197 021 - 9108
4 Start_Stop_Count -O--CK 100 100 000 - 44
5 Reallocated_Sector_Ct PO--CK 200 200 140 - 0
7 Seek_Error_Rate -OSR-K 200 200 000 - 0
9 Power_On_Hours -O--CK 065 065 000 - 25977
10 Spin_Retry_Count -O--CK 100 253 000 - 0
11 Calibration_Retry_Count -O--CK 100 253 000 - 0
12 Power_Cycle_Count -O--CK 100 100 000 - 44
192 Power-Off_Retract_Count -O--CK 200 200 000 - 42
193 Load_Cycle_Count -O--CK 200 200 000 - 915
194 Temperature_Celsius -O---K 121 113 000 - 31
196 Reallocated_Event_Count -O--CK 200 200 000 - 0
197 Current_Pending_Sector -O--CK 200 200 000 - 0
198 Offline_Uncorrectable ----CK 100 253 000 - 0
199 UDMA_CRC_Error_Count -O--CK 200 200 000 - 40
200 Multi_Zone_Error_Rate ---R-- 200 200 000 - 0
||||||_ K auto-keep
|||||__ C event count
||||___ R error rate
|||____ S speed/performance
||_____ O updated online
|______ P prefailure warning
General Purpose Log Directory Version 1
SMART Log Directory Version 1 [multi-sector log support]
Address Access R/W Size Description
0x00 GPL,SL R/O 1 Log Directory
0x01 SL R/O 1 Summary SMART error log
0x02 SL R/O 5 Comprehensive SMART error log
0x03 GPL R/O 6 Ext. Comprehensive SMART error log
0x06 SL R/O 1 SMART self-test log
0x07 GPL R/O 1 Extended self-test log
0x09 SL R/W 1 Selective self-test log
0x10 GPL R/O 1 NCQ Command Error log
0x11 GPL R/O 1 SATA Phy Event Counters log
0x21 GPL R/O 1 Write stream error log
0x22 GPL R/O 1 Read stream error log
0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log
0x80-0x9f GPL,SL R/W 16 Host vendor specific log
0xa0-0xa7 GPL,SL VS 16 Device vendor specific log
0xa8-0xb6 GPL,SL VS 1 Device vendor specific log
0xb7 GPL,SL VS 54 Device vendor specific log
0xbd GPL,SL VS 1 Device vendor specific log
0xc0 GPL,SL VS 1 Device vendor specific log
0xc1 GPL VS 93 Device vendor specific log
0xe0 GPL,SL R/W 1 SCT Command/Status
0xe1 GPL,SL R/W 1 SCT Data Transfer
SMART Extended Comprehensive Error Log Version: 1 (6 sectors)
Device Error Count: 12
CR = Command Register
FEATR = Features Register
COUNT = Count (was: Sector Count) Register
LBA_48 = Upper bytes of LBA High/Mid/Low Registers ] ATA-8
LH = LBA High (was: Cylinder High) Register ] LBA
LM = LBA Mid (was: Cylinder Low) Register ] Register
LL = LBA Low (was: Sector Number) Register ]
DV = Device (was: Device/Head) Register
DC = Device Control Register
ER = Error register
ST = Status register
Powered_Up_Time is measured from power on, and printed as
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
SS=sec, and sss=millisec. It "wraps" after 49.710 days.
Error 12 [11] occurred at disk power-on lifetime: 910 hours (37 days + 22 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
40 -- 51 00 00 00 02 ba a0 f1 50 40 00 Error: UNC at LBA = 0x2baa0f150 = 11721044304
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
60 00 e0 00 18 00 02 ba a0 f2 a0 40 00 05:30:22.518 READ FPDMA QUEUED
60 00 e0 00 10 00 02 ba a0 f0 a0 40 00 05:30:22.518 READ FPDMA QUEUED
60 00 e0 00 08 00 00 00 40 02 a0 40 00 05:30:22.518 READ FPDMA QUEUED
60 00 e0 00 00 00 00 00 40 00 a0 40 00 05:30:22.518 READ FPDMA QUEUED
ec 00 00 00 00 00 00 00 00 00 00 00 00 05:30:22.517 IDENTIFY DEVICE
Error 11 [10] occurred at disk power-on lifetime: 909 hours (37 days + 21 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
40 -- 51 00 00 00 00 00 00 02 80 40 00 Error: UNC at LBA = 0x00000280 = 640
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
60 01 00 00 00 00 00 00 00 02 80 40 00 04:30:58.336 READ FPDMA QUEUED
60 01 00 00 00 00 00 00 00 02 80 40 00 04:30:58.334 READ FPDMA QUEUED
60 01 00 00 00 00 00 00 40 02 80 40 00 04:30:58.332 READ FPDMA QUEUED
60 01 00 00 00 00 00 00 40 02 80 40 00 04:30:58.331 READ FPDMA QUEUED
60 01 00 00 00 00 00 00 00 01 80 40 00 04:30:58.330 READ FPDMA QUEUED
Error 10 [9] occurred at disk power-on lifetime: 909 hours (37 days + 21 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
40 -- 51 00 00 00 00 00 3f fc 80 40 00 Error: UNC at LBA = 0x003ffc80 = 4193408
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
60 01 00 00 00 00 00 00 3f fc 80 40 00 04:28:34.244 READ FPDMA QUEUED
60 01 00 00 00 00 00 00 40 03 80 40 00 04:28:34.243 READ FPDMA QUEUED
60 01 00 00 08 00 00 00 00 02 00 40 00 04:28:34.241 READ FPDMA QUEUED
60 01 00 00 00 00 00 00 40 02 80 40 00 04:28:34.241 READ FPDMA QUEUED
60 01 00 00 00 00 00 00 00 02 80 40 00 04:28:34.240 READ FPDMA QUEUED
Error 9 [8] occurred at disk power-on lifetime: 909 hours (37 days + 21 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
40 -- 51 00 00 00 00 00 40 01 00 40 00 Error: UNC at LBA = 0x00400100 = 4194560
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
60 01 00 00 00 00 00 00 40 00 80 40 00 04:27:23.212 READ FPDMA QUEUED
60 01 00 00 00 00 00 00 00 02 00 40 00 04:27:23.211 READ FPDMA QUEUED
60 01 00 00 00 00 00 00 00 01 00 40 00 04:27:23.210 READ FPDMA QUEUED
60 01 00 00 00 00 00 00 00 00 00 40 00 04:27:23.209 READ FPDMA QUEUED
ec 00 00 00 00 00 00 00 00 00 00 00 00 04:27:23.208 IDENTIFY DEVICE
Error 8 [7] occurred at disk power-on lifetime: 909 hours (37 days + 21 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
40 -- 51 00 00 00 00 00 00 01 80 40 00 Error: UNC at LBA = 0x00000180 = 384
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
60 01 00 00 00 00 00 00 00 01 80 40 00 04:25:13.635 READ FPDMA QUEUED
60 01 00 00 00 00 00 00 00 00 80 40 00 04:25:13.635 READ FPDMA QUEUED
ec 00 00 00 00 00 00 00 00 00 00 00 00 04:25:13.634 IDENTIFY DEVICE
ec 00 00 00 00 00 00 00 00 00 00 00 00 04:25:13.399 IDENTIFY DEVICE
60 01 00 00 10 00 00 00 3f ff 80 40 00 04:25:12.463 READ FPDMA QUEUED
Error 7 [6] occurred at disk power-on lifetime: 909 hours (37 days + 21 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
40 -- 51 00 00 00 00 00 3f fd e0 40 00 Error: UNC at LBA = 0x003ffde0 = 4193760
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
60 01 00 00 00 00 00 00 3f fd 80 40 00 04:07:05.476 READ FPDMA QUEUED
60 01 00 00 00 00 00 00 3f ff 80 40 00 04:07:05.474 READ FPDMA QUEUED
60 01 00 00 00 00 00 00 40 02 80 40 00 04:07:05.473 READ FPDMA QUEUED
60 01 00 00 00 00 00 00 40 02 80 40 00 04:07:05.471 READ FPDMA QUEUED
60 01 00 00 00 00 00 00 3f fc 80 40 00 04:07:05.470 READ FPDMA QUEUED
Error 6 [5] occurred at disk power-on lifetime: 907 hours (37 days + 19 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
40 -- 51 00 00 00 00 00 00 00 e0 40 00 Error: UNC at LBA = 0x000000e0 = 224
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
60 01 00 00 00 00 00 00 00 00 80 40 00 02:40:16.417 READ FPDMA QUEUED
ec 00 00 00 00 00 00 00 00 00 00 00 00 02:40:16.416 IDENTIFY DEVICE
60 01 00 00 10 00 02 ba a0 f3 80 40 00 02:40:15.546 READ FPDMA QUEUED
60 01 00 00 08 00 00 00 3f ff 80 40 00 02:40:15.546 READ FPDMA QUEUED
60 01 00 00 00 00 02 ba a0 f3 80 40 00 02:40:15.546 READ FPDMA QUEUED
Error 5 [4] occurred at disk power-on lifetime: 907 hours (37 days + 19 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
40 -- 51 00 00 00 02 ba a0 f1 70 40 00 Error: UNC at LBA = 0x2baa0f170 = 11721044336
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
60 01 00 00 00 00 02 ba a0 f0 80 40 00 02:28:41.406 READ FPDMA QUEUED
60 01 00 00 00 00 00 00 3f fc 80 40 00 02:28:41.405 READ FPDMA QUEUED
60 01 00 00 00 00 02 ba a0 f1 80 40 00 02:28:41.404 READ FPDMA QUEUED
60 01 00 00 00 00 02 ba a0 f1 00 40 00 02:28:41.402 READ FPDMA QUEUED
60 01 00 00 00 00 00 00 40 03 80 40 00 02:28:41.401 READ FPDMA QUEUED
SMART Extended Self-test Log Version: 1 (1 sectors)
Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
# 1 Short offline Completed without error 00% 25888 -
# 2 Short offline Completed without error 00% 25887 -
# 3 Short offline Completed without error 00% 25886 -
# 4 Short offline Completed without error 00% 25885 -
# 5 Short offline Completed without error 00% 25884 -
# 6 Short offline Completed without error 00% 25884 -
# 7 Short offline Completed without error 00% 25882 -
# 8 Short offline Completed without error 00% 25881 -
# 9 Short offline Completed without error 00% 25881 -
#10 Short offline Completed without error 00% 25880 -
#11 Short offline Completed without error 00% 25879 -
#12 Short offline Completed without error 00% 25878 -
#13 Short offline Completed without error 00% 25876 -
#14 Short offline Completed without error 00% 25876 -
#15 Short offline Completed without error 00% 25875 -
#16 Short offline Completed without error 00% 25874 -
#17 Short offline Completed without error 00% 25872 -
#18 Short offline Completed without error 00% 25869 -
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
SCT Status Version: 3
SCT Version (vendor specific): 258 (0x0102)
Device State: Active (0)
Current Temperature: 31 Celsius
Power Cycle Min/Max Temperature: 30/39 Celsius
Lifetime Min/Max Temperature: 17/39 Celsius
Under/Over Temperature Limit Count: 0/0
Vendor specific:
01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
SCT Temperature History Version: 2
Temperature Sampling Period: 1 minute
Temperature Logging Interval: 1 minute
Min/Max recommended Temperature: 0/60 Celsius
Min/Max Temperature Limit: -41/85 Celsius
Temperature History Size (Index): 478 (154)
SCT Error Recovery Control:
Read: 70 (7.0 seconds)
Write: 70 (7.0 seconds)
Device Statistics (GP/SMART Log 0x04) not supported
Pending Defects log (GP Log 0x0c) not supported
SATA Phy Event Counters (GP Log 0x11)
ID Size Value Description
0x0001 2 0 Command failed due to ICRC error
0x0002 2 0 R_ERR response for data FIS
0x0003 2 0 R_ERR response for device-to-host data FIS
0x0004 2 0 R_ERR response for host-to-device data FIS
0x0005 2 0 R_ERR response for non-data FIS
0x0006 2 0 R_ERR response for device-to-host non-data FIS
0x0007 2 0 R_ERR response for host-to-device non-data FIS
0x0008 2 0 Device-to-host non-data FIS retries
0x0009 2 1 Transition from drive PhyRdy to drive PhyNRdy
0x000a 2 3 Device-to-host register FISes sent due to a COMRESET
0x000b 2 0 CRC errors within host-to-device FIS
0x000d 2 0 Non-CRC errors within host-to-device FIS
0x000f 2 0 R_ERR response for host-to-device data FIS, CRC
0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC
0x8000 4 14786565 Vendor specific
View Git Blame Copy Permalink