mirror of
https://github.com/bsdhw/SMART.git
synced 2025-05-31 16:21:41 +05:30
193 lines
9.0 KiB
Plaintext
193 lines
9.0 KiB
Plaintext
smartctl 7.1 2019-12-30 r5022 [FreeBSD 12.1-RELEASE-p5 amd64] (local build)
|
|
Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org
|
|
|
|
=== START OF INFORMATION SECTION ===
|
|
Model Family: Samsung based SSDs
|
|
Device Model: SAMSUNG MZ7TE256HMHP-000H1
|
|
Serial Number: --
|
|
LU WWN Device Id: 5 002538 ...
|
|
Firmware Version: EXT09H0Q
|
|
User Capacity: 256,060,514,304 bytes [256 GB]
|
|
Sector Size: 512 bytes logical/physical
|
|
Rotation Rate: Solid State Device
|
|
Device is: In smartctl database [for details use: -P show]
|
|
ATA Version is: ACS-2, ATA8-ACS T13/1699-D revision 4c
|
|
SATA Version is: SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s)
|
|
Local Time is: Wed May 27 18:26:48 2020 CEST
|
|
SMART support is: Available - device has SMART capability.
|
|
SMART support is: Enabled
|
|
AAM feature is: Unavailable
|
|
APM feature is: Unavailable
|
|
Rd look-ahead is: Enabled
|
|
Write cache is: Enabled
|
|
DSN feature is: Unavailable
|
|
ATA Security is: Disabled, NOT FROZEN [SEC1]
|
|
Unexpected SCT status 0x0001 (action_code=4, function_code=2)
|
|
Wt Cache Reorder: Unknown (SCT Feature Control command failed)
|
|
|
|
=== START OF READ SMART DATA SECTION ===
|
|
SMART overall-health self-assessment test result: PASSED
|
|
|
|
General SMART Values:
|
|
Offline data collection status: (0x02) Offline data collection activity
|
|
was completed without error.
|
|
Auto Offline Data Collection: Disabled.
|
|
Self-test execution status: ( 0) The previous self-test routine completed
|
|
without error or no self-test has ever
|
|
been run.
|
|
Total time to complete Offline
|
|
data collection: ( 1680) seconds.
|
|
Offline data collection
|
|
capabilities: (0x53) SMART execute Offline immediate.
|
|
Auto Offline data collection on/off support.
|
|
Suspend Offline collection upon new
|
|
command.
|
|
No Offline surface scan supported.
|
|
Self-test supported.
|
|
No Conveyance Self-test supported.
|
|
Selective Self-test supported.
|
|
SMART capabilities: (0x0003) Saves SMART data before entering
|
|
power-saving mode.
|
|
Supports SMART auto save timer.
|
|
Error logging capability: (0x01) Error logging supported.
|
|
General Purpose Logging supported.
|
|
Short self-test routine
|
|
recommended polling time: ( 2) minutes.
|
|
Extended self-test routine
|
|
recommended polling time: ( 28) minutes.
|
|
SCT capabilities: (0x003d) SCT Status supported.
|
|
SCT Error Recovery Control supported.
|
|
SCT Feature Control supported.
|
|
SCT Data Table supported.
|
|
|
|
SMART Attributes Data Structure revision number: 1
|
|
Vendor Specific SMART Attributes with Thresholds:
|
|
ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE
|
|
1 Raw_Read_Error_Rate POSR-K 100 100 002 - 0
|
|
5 Reallocated_Sector_Ct PO--CK 100 100 010 - 0
|
|
9 Power_On_Hours -O--CK 080 080 001 - 13079
|
|
11 Unknown_SSD_Attribute -O---K 099 099 001 - 118
|
|
12 Power_Cycle_Count -O--CK 098 098 001 - 1326
|
|
170 Unused_Rsvd_Blk_Ct_Chip PO--C- 099 099 010 - 2209
|
|
171 Program_Fail_Count_Chip -O---K 100 100 010 - 0
|
|
172 Erase_Fail_Count_Chip -O--CK 100 100 010 - 0
|
|
173 Wear_Leveling_Count PO--C- 096 096 005 - 744357912
|
|
174 Unexpect_Power_Loss_Ct -O--CK 099 099 001 - 118
|
|
183 Runtime_Bad_Block -O--CK 099 099 001 - 22
|
|
184 End-to-End_Error PO--CK 100 100 097 - 0
|
|
187 Uncorrectable_Error_Cnt -O--CK 100 100 000 - 0
|
|
188 Command_Timeout -O--CK 100 100 000 - 0
|
|
190 Airflow_Temperature_Cel -O---K 072 072 001 - 28 (Min/Max 25/28)
|
|
196 Reallocated_Event_Count -O--CK 100 100 001 - 0
|
|
198 Offline_Uncorrectable ----CK 100 100 001 - 0
|
|
199 CRC_Error_Count -O---K 100 100 001 - 0
|
|
||||||_ K auto-keep
|
|
|||||__ C event count
|
|
||||___ R error rate
|
|
|||____ S speed/performance
|
|
||_____ O updated online
|
|
|______ P prefailure warning
|
|
|
|
General Purpose Log Directory Version 1
|
|
SMART Log Directory Version 1 [multi-sector log support]
|
|
Address Access R/W Size Description
|
|
0x00 GPL,SL R/O 1 Log Directory
|
|
0x01 SL R/O 1 Summary SMART error log
|
|
0x02 SL R/O 1 Comprehensive SMART error log
|
|
0x03 GPL R/O 1 Ext. Comprehensive SMART error log
|
|
0x04 GPL,SL R/O 8 Device Statistics log
|
|
0x06 SL R/O 1 SMART self-test log
|
|
0x07 GPL R/O 1 Extended self-test log
|
|
0x09 SL R/W 1 Selective self-test log
|
|
0x10 GPL R/O 1 NCQ Command Error log
|
|
0x11 GPL R/O 1 SATA Phy Event Counters log
|
|
0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log
|
|
0x80-0x9f GPL,SL R/W 16 Host vendor specific log
|
|
0xb6 GPL VS 127 Device vendor specific log
|
|
0xe0 GPL,SL R/W 1 SCT Command/Status
|
|
0xe1 GPL,SL R/W 1 SCT Data Transfer
|
|
|
|
SMART Extended Comprehensive Error Log Version: 1 (1 sectors)
|
|
No Errors Logged
|
|
|
|
SMART Extended Self-test Log Version: 1 (1 sectors)
|
|
Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
|
|
# 1 Short offline Completed without error 00% 2 -
|
|
|
|
Warning! SMART Selective Self-Test Log Structure error: invalid SMART checksum.
|
|
SMART Selective self-test log data structure revision number 1
|
|
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
|
|
1 0 0 Completed [00% left] (4294967295-4295032830)
|
|
2 0 0 Not_testing
|
|
3 0 0 Not_testing
|
|
4 0 0 Not_testing
|
|
5 0 0 Not_testing
|
|
Selective self-test flags (0x0):
|
|
After scanning selected spans, do NOT read-scan remainder of disk.
|
|
If Selective self-test is pending on power-up, resume after 0 minute delay.
|
|
|
|
SCT Status Version: 3
|
|
SCT Version (vendor specific): 1 (0x0001)
|
|
Device State: Active (0)
|
|
Current Temperature: 28 Celsius
|
|
Power Cycle Min/Max Temperature: ?/ ? Celsius
|
|
Lifetime Min/Max Temperature: ?/ ? Celsius
|
|
Under/Over Temperature Limit Count: 0/78423
|
|
|
|
SCT Temperature History Version: 2
|
|
Temperature Sampling Period: 10 minutes
|
|
Temperature Logging Interval: 10 minutes
|
|
Min/Max recommended Temperature: ?/ ? Celsius
|
|
Min/Max Temperature Limit: ?/ ? Celsius
|
|
Temperature History Size (Index): 128 (2)
|
|
|
|
SCT Error Recovery Control:
|
|
Read: Disabled
|
|
Write: Disabled
|
|
|
|
Device Statistics (GP Log 0x04)
|
|
Page Offset Size Value Flags Description
|
|
0x01 ===== = = === == General Statistics (rev 2) ==
|
|
0x01 0x008 4 1326 --- Lifetime Power-On Resets
|
|
0x01 0x010 4 0 --- Power-on Hours
|
|
0x01 0x018 6 20267715188 --- Logical Sectors Written
|
|
0x01 0x020 6 400833241 --- Number of Write Commands
|
|
0x01 0x028 6 11956720617 --- Logical Sectors Read
|
|
0x01 0x030 6 227263211 --- Number of Read Commands
|
|
0x04 ===== = = === == General Errors Statistics (rev 1) ==
|
|
0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors
|
|
0x04 0x010 4 4930 --- Resets Between Cmd Acceptance and Completion
|
|
0x06 ===== = = === == Transport Statistics (rev 1) ==
|
|
0x06 0x008 4 0 --- Number of Hardware Resets
|
|
0x06 0x010 4 0 --- Number of ASR Events
|
|
0x06 0x018 4 0 --- Number of Interface CRC Errors
|
|
0x07 ===== = = === == Solid State Device Statistics (rev 1) ==
|
|
0x07 0x008 1 0 N-- Percentage Used Endurance Indicator
|
|
|||_ C monitored condition met
|
|
||__ D supports DSN
|
|
|___ N normalized value
|
|
|
|
Pending Defects log (GP Log 0x0c) not supported
|
|
|
|
SATA Phy Event Counters (GP Log 0x11)
|
|
ID Size Value Description
|
|
0x0001 2 0 Command failed due to ICRC error
|
|
0x0002 2 0 R_ERR response for data FIS
|
|
0x0003 2 0 R_ERR response for device-to-host data FIS
|
|
0x0004 2 0 R_ERR response for host-to-device data FIS
|
|
0x0005 2 0 R_ERR response for non-data FIS
|
|
0x0006 2 0 R_ERR response for device-to-host non-data FIS
|
|
0x0007 2 0 R_ERR response for host-to-device non-data FIS
|
|
0x0008 2 0 Device-to-host non-data FIS retries
|
|
0x0009 2 3 Transition from drive PhyRdy to drive PhyNRdy
|
|
0x000a 2 3 Device-to-host register FISes sent due to a COMRESET
|
|
0x000b 2 0 CRC errors within host-to-device FIS
|
|
0x000d 2 0 Non-CRC errors within host-to-device FIS
|
|
0x000f 2 0 R_ERR response for host-to-device data FIS, CRC
|
|
0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC
|
|
0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC
|
|
0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC
|
|
|
|
|
|
|