Commit Graph

1779 Commits

Author SHA1 Message Date
Jim Warner
e21cc13c64 misc: eliminate accumulated trailing whitespace, again
Signed-off-by: Jim Warner <james.warner@comcast.net>
2016-03-12 14:53:53 +11:00
Jim Warner
215a54f729 top: eliminate all superfluous cruft under the new API
This commit is just a cleanup of some extraneous cruft
left after the newlib migrations and summarized below:

. whack the 2nd line of what was an eliminated comment

. eliminated reference to NUM_NS and thus that need to
include the otherwise defunct 'readproc.h' header file

. reference to Frame_maxtask made properly generalized

. all former sort support #define's are now eliminated

Signed-off-by: Jim Warner <james.warner@comcast.net>
2016-03-12 14:53:36 +11:00
Jim Warner
4416863bdf top: fix data types for latest library representations
Signed-off-by: Jim Warner <james.warner@comcast.net>
2016-03-12 14:53:09 +11:00
Jim Warner
65000d7c64 library: miscellaneous tweaks for code and/or comments
Summarized below, miscellany addressed in this commit:

. deleted extraneous newline(s) for consistent spacing

Signed-off-by: Jim Warner <james.warner@comcast.net>
2016-03-12 14:52:56 +11:00
Mike Frysinger
80bdaca31d set test programs to check_PROGRAMS
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2016-03-10 22:59:28 +11:00
Mike Frysinger
69d0199672 enable transparent large file support
Historically LFS mattered only to open/read large files.  A few programs
here use open/seek, but not generally on files that are large.  However,
LFS also applies to stat which procps does in a bunch of places -- some
filesystems have 64bit inodes and attempts to do a 32bit stat will throw
an error.

Enable transparent LFS everywhere to avoid this.
2016-03-10 22:30:02 +11:00
Craig Small
03437d7dd3 A locale-independent strtod
There is a need in some utilities to have a way of accepting both
types of decimal points "." and ",". The only way seems to be to
rebuild strtod().

This new function will accept "123.456" and "123,456" as 123.456
and considers them the same number. It means we lose thousands
separator, but this is rarely used.

test scripts are added to check the function returns the proper
values. There was simpler predecessor that got stuck on negative
0 or -0.123 which these tests flushed out.

References:
2016-03-10 22:27:09 +11:00
Craig Small
61dcba87c1 watch: interpret esc[m sequence
Commit 99fa7f removed watch crashing from having the null ANSI
sequence. However it just ignored that sequence instead of fixing it.

This change correctly checks buf (not undefined endptr) and sends
the reset attribute if found.

Closes: #12
2016-03-10 22:21:13 +11:00
Craig Small
471cf4cd36 Merge branch 'master' into newlib
Conflicts:
	pgrep.c
	proc/sysinfo.c
	ps/output.c
	skill.c
	top/top.c
	top/top.h
	w.c
2015-10-28 21:09:26 +11:00
Jim Warner
94e4749be3 top: extend '=' key to include active 'locate' request
It is documented behavior that when certain other keys
are active, sorts column highlighting will temporarily
be disabled. Among those keys is the 'L' (locate/find)
provision. The equals ('=') key can be used to restore
column highlighting by resetting other keys, except 1.

When a locate/find is active, the '=' key will have no
effect on 'x' column highlighting, which still remains
disabled. Further, when 'L' is active an 'x' keystroke
is processed changing the state of column highlighting
but without any visual clue (since it's yet disabled).

So this commit just extends the '=' key to embrace 'L'
processing resets, just like other highlight disabling
keys while avoiding 'x' state changes if approproiate.

Signed-off-by: Jim Warner <james.warner@comcast.net>
2015-10-28 21:01:49 +11:00
Jim Warner
489d23a132 top: ATEOJ_RPTHSH prints hash table entries less often
We'll following the newlib <pids> approach to hashing:

. a 'PIDs at max depth:' portion of that UNREF_RPTHASH
enabled #define is now published only when the maximum
depth of hash table entry chains exceed depths of one.

Signed-off-by: Jim Warner <james.warner@comcast.net>
2015-10-28 21:01:28 +11:00
Jim Warner
e1cd74eec9 top: do not co-mingle strings/numbers under namespaces
Craig's recent commit under that newlib branch dealing
with namespace support has prompted me to review top's
handling of those fields. Currently, when such a field
is zero, top displays a dash ('-'). This will mean the
justification toggles ('j/J') will behave incorrectly.

This patch simply allows the potential zero to display
or be suppressed with the already existing '0' toggle.

Signed-off-by: Jim Warner <james.warner@comcast.net>
2015-10-28 21:01:23 +11:00
Jim Warner
c7201d52eb top: miscellaneous accumulated tweaks to code/comments
A patch containing the following miscellaneous tweaks:

. remove a function that handled former library errors
[ that function should have gone bye-bye with 3.3.11 ]
[ when those 'wchan' provisions were much simplified ]

Signed-off-by: Jim Warner <james.warner@comcast.net>
2015-10-28 21:01:16 +11:00
Jim Warner
b1f7b2a509 top: update the man document reporting bugs suggestion
Signed-off-by: Jim Warner <james.warner@comcast.net>
2015-10-28 21:00:21 +11:00
Jim Warner
2b0dd2d702 library: correct <pids> support of true string vectors
When reference counts were added to some string fields
the 3 true string vector fields were not duplicated as
were those other fields. Instead they were supposed to
disallow a duplicate stack reference beyond the first.
However, the actual implementation gave NULL for every
true vector field whenever such items were duplicated.

More importantly, such true string vector fields never
considered references to the shared proc_t source root
which would have forced the conversion of such vectors
into a single string form via the '_CVT' library flag.

So this commit restores the intended outcome with true
string vectors. There's only 1 valid reference allowed
and duplicates and converted fields will yield a NULL.

Signed-off-by: Jim Warner <james.warner@comcast.net>
2015-10-28 20:58:28 +11:00
Jim Warner
9db796f8cb library: correct one <pids> reference from str to strv
While not changing generated code this commit corrects
one free reference from 'str' to a more proper 'strv'.

Signed-off-by: Jim Warner <james.warner@comcast.net>
2015-10-28 20:58:12 +11:00
Craig Small
b2f49b105d Closes: #9 ps: Remove Unix98 output limitations
ps previously followed the Unix98 standard when it comes to
user-defined output, sometimes. This meant you could have
user output format with a header that included commas and
equals signs. It was dependent on if ps thought you wanted
sysv or bsd format and THAT was dependent on things in previous
options.

It was very confusing to a user because
 ps p $$ -o pid=,comm=
gave you a two-column output but
 ps -p $$ -o pid=,comm=
would give you a one column output with the header ",comm="

The -p versus p means (to ps) you want sysv or bsd parsing.
Unix98 standard or not, this is plainly just silly.

The commit removes any of the quirks Unix98 has with user defined
output.  If you really wanted a ps header with commas in the output,
today isn't your day.

Signed-off-by: Craig Small <csmall@enc.com.au>
2015-10-26 11:18:52 +11:00
Craig Small
08ef0f5714 Removed empty test 2015-10-24 14:41:54 +11:00
Craig Small
aed8ad5e5c Removed empty test 2015-10-24 14:41:19 +11:00
Craig Small
602b9a02ce free: use SReclaimable in cached
The previous commit added all of slab into the cache value. The
thing was is cached in this context is something you can get
back and reclaim if under memory pressure.

The problem was slab parameter includes both reclaimable and
unreclaimable values which doesn't make sense in this context.
This commit make cached only use the reclaimable component.

References:
 http://www.freelists.org/post/procps/OmegaPhilxxxxxxxxxxxxx-Bug799716-free-considers-cached-to-include-SUnreclaim
 https://github.com/brndnmtthws/conky/issues/130
 https://bugs.debian.org/799716

Commits:
 05d751c4f0
 6cb75efef8
2015-10-24 14:29:25 +11:00
Craig Small
05d751c4f0 free: use SReclaimable in cached
The previous commit added all of slab into the cache value. The
thing was is cached in this context is something you can get
back and reclaim if under memory pressure.

The problem was slab parameter includes both reclaimable and
unreclaimable values which doesn't make sense in this context.
This commit make cached only use the reclaimable component.

References:
 http://www.freelists.org/post/procps/OmegaPhilxxxxxxxxxxxxx-Bug799716-free-considers-cached-to-include-SUnreclaim
 https://github.com/brndnmtthws/conky/issues/130
 https://bugs.debian.org/799716

Commits:
 6cb75efef8
2015-10-24 14:21:23 +11:00
Craig Small
9fda3da0ad Merge branch 'no-cxx' into 'master'
configure.ac: do not check for C++ compiler

We do not have any C++ code, so there is no point in checking for C++
tools in the configure script.

Signed-off-by: John Keeping <john@keeping.me.uk>

See merge request !8
2015-10-24 02:36:15 +00:00
Craig Small
97cde50b35 free: use correct end sentinel
When scaling values, the last item was integer 0 but the loop checked
for character '0'.

This was reported by 付腾桂 Thanks for the report and patch.
2015-10-24 13:17:36 +11:00
Craig Small
aeef4e6803 added new CI status button 2015-10-24 01:35:01 +00:00
Craig Small
0822f49e8e Remove CI from readme as the function has been integrated 2015-10-24 01:23:31 +00:00
Jim Warner
88489be542 library: allow duplicated results for <pids> interface
Ok, here is that rather major internal redesign hinted
at in the three previous commits. Its need was quickly
revealed after adapting top then attempting to display
newly added 'CGNAME' fields and an existing 'CGROUPS'.

That very quickly generated a SEGV. And the reason was
just as quickly recognized. Both fields relied on that
proc_t.cgroup member yet whichever result structure is
first in a stack is the one which assumes ownership of
of the vectored sting by resetting its cgroup to NULL.

So this commit introduces reference counting for a few
of the fields in the proc_t. Specifically there are 17
entries in the Item_table dealing with strings/vectors
where ownership is transferred to newlib. Now whenever
such fields are represented more than once in a stack,
the strings will be duplicated instead of transferred.
In this way we can generally remain optimized avoiding
string copies, yet still accommodate them when needed.

There's an exception to this scheme: those true string
vectors (CGROUP_V, CMDLINE_V and ENVIRON_V). When such
fields are duplicated in a stack the result structures
beyond the first will be set to NULL, which the caller
will (should) already be equipped to deal with anyway.

Signed-off-by: Jim Warner <james.warner@comcast.net>
2015-10-14 21:50:31 +11:00
Jim Warner
cfd47f710a ps: exploits <pids> enhancement for control group name
[ but stay tuned! there is a commit coming soon that ]
[ represents a rather major internal redesign, which ]
[ was prompted by the ps and top adaptation testing. ]

Signed-off-by: Jim Warner <james.warner@comcast.net>
2015-10-14 21:49:38 +11:00
Jim Warner
3a00c7e499 top: exploit <pids> enhancement for control group name
[ but stay tuned! there is a commit coming soon that ]
[ represents a rather major internal redesign, which ]
[ was prompted by the ps and top adaptation testing. ]

Signed-off-by: Jim Warner <james.warner@comcast.net>
2015-10-14 21:49:08 +11:00
Jim Warner
a59a269661 library: added PROCPS_PIDS_CGNAME for <pids> interface
The ps program was modified to print the control group
names, based on the library provided list of all those
control groups to which a process belongs. But this is
probably something the newlib should be doing for all.

So this commit borrows the ps approach to cg names and
thus will make that available to all future consumers.

[ but stay tuned! there is a commit coming soon that ]
[ represents a rather major internal redesign, which ]
[ was prompted by the ps and top adaptation testing. ]

Signed-off-by: Jim Warner <james.warner@comcast.net>
2015-10-14 21:48:41 +11:00
Jim Warner
d53e98ff97 misc: adapt ps & top to procps_pids_stacks_sort rename
Signed-off-by: Jim Warner <james.warner@comcast.net>
2015-10-14 21:47:19 +11:00
Jim Warner
838e7852cb library: rename the 'procps_pids_stacks_sort' function
The above function was the sole public function in the
<pids> interface to use the word 'stacks' in its name.
All of the others dealt exclusively with their duties,

So this commit normalizes that outlier by renaming it.

Signed-off-by: Jim Warner <james.warner@comcast.net>
2015-10-14 21:47:04 +11:00
Jim Warner
c9388ed512 library: re-enable <pids) dealloc_stacks, found a need
The above function had been disabled via '#if 0' so as
to prevent a compiler warning. But it really should be
called by that 'procps_pids_read_shut' function rather
than it duplicating/reinventing the same logic itself.

Signed-off-by: Jim Warner <james.warner@comcast.net>
2015-10-14 21:35:53 +11:00
Jim Warner
657ac2e0c7 top: extend '=' key to include active 'locate' request
It is documented behavior that when certain other keys
are active, sorts column highlighting will temporarily
be disabled. Among those keys is the 'L' (locate/find)
provision. The equals ('=') key can be used to restore
column highlighting by resetting other keys, except 1.

When a locate/find is active, the '=' key will have no
effect on 'x' column highlighting, which still remains
disabled. Further, when 'L' is active an 'x' keystroke
is processed changing the state of column highlighting
but without any visual clue (since it's yet disabled).

So this commit just extends the '=' key to embrace 'L'
processing resets, just like other highlight disabling
keys while avoiding 'x' state changes if approproiate.

Signed-off-by: Jim Warner <james.warner@comcast.net>
2015-10-14 21:35:35 +11:00
Craig Small
d7791607ad watch: Correctly process [m Remove lib dependency
The commit referenced below made the ANSI sequence
[m be interpreted as [0m However this change was put
in the incorrect place and would reference an undefined
pointer, causing a crash. Thanks to Jimmy Theis for the
second heads-up.

watch doesn't need any libprocps functions so it is no
longer linked to them.

References:
 commit a5937e4e94
 https://www.freelists.org/post/procps/watch-crashes-but-its-not-the-latest-commit-fault
 https://www.freelists.org/post/procps/Segmentation-fault-in-watch-3311

Signed-off-by: Craig Small <csmall@enc.com.au>

Ported-by: Jim Warner <james.warner@comcast.net>
From original:
commit 99fa7f9f57
2015-10-14 21:34:54 +11:00
Craig Small
03b148d517 ps: display control group name
The cgroup field while shown as a vector is a concatenated
string, so alot of the complexity of sorting and displaying
has gone.

This change simplifies the cgroup sorting and adds display
and sorting for the name attribute of the cgroup, if found.

Signed-off-by: Craig Small <csmall@enc.com.au>

Ported-by: Jim Warner <james.warner@comcast.net>
From original:
commit 0ee090ae16
2015-10-14 21:34:37 +11:00
Craig Small
7b08ad19cc w: Adjust command width
w would error out if the window size was smaller than 71 or some
other fields through environment grew too big. The code was a little
convoluted as well. The minimum length for command was 3, which is
pretty useless.

This change does the following:
 w doesn't care by default the window size
 w will adjust the command length up and down, to a minimum of 7
characters.
 if the fields don't fit, w will line-wrap each line.

The idea being its better the line-wrap than it is to error out.

References: https://bugs.debian.org/183394

Signed-off-by: Craig Small <csmall@enc.com.au>

Ported-by: Jim Warner <james.warner@comcast.net>
From original:
commit 151c05b497
2015-10-14 21:34:22 +11:00
Craig Small
2f78b195ad testsuite: check for trailing garbage in pkill
Previous commit fixed pkill for trailing garbage on pkill
signal when it was an integer. This check now ensures that
pkill complains about it.

References:
 commit a3975a9c60
2015-10-14 21:31:56 +11:00
Filipe Brandenburger
a3975a9c60 pkill: reject -signal number with trailing garbage
This commit prevents pkill from accepting something like `-1garbage` as
a SIGHUP. The previous code was using atoi() which does not check for
trailing garbage and would parse the above as 1.

Handling numeric signals in signal_option() is not really necessary,
since signal_name_to_number() will recognize numeric signals and parse
them properly using strtol() and checking for trailing garbage. It also
checks that the numeric signals are in the proper range. So all we need
to do is remove the buggy numeric signal handling here.

Tested with `pkill -1garbage sleep`, after this patch it will complain
that "1" is not a valid option, which is the expected.

Signed-off-by: Filipe Brandenburger <filbranden@google.com>

Ported-by: Jim Warner <james.warner@comcast.net>
From original:
commit 9646f7cba4
2015-10-14 21:24:38 +11:00
Jim Warner
41e7510333 top: correct a flaw in the support for pids monitoring
Ever since top was adapted to the new <pids> interface
there has been a bug that would cause an abnormal exit
when the '-p' argument contained *no* valid pids. This
was never revealed until now since the QA folks tested
only with valid, existing pids. (bunch of morons, eh?)

And even though the program author is blameless he has
taken it upon himself to clean up after the QA jokers.

Signed-off-by: Jim Warner <james.warner@comcast.net>
2015-10-09 21:35:28 +11:00
Jim Warner
bc616b3615 library: correct a flawed approach for PROCPS_FILL_UID
Gosh, just because nobody uses some newlib provision I
guess, since it is being offered, it ought to actually
be tested at some point. Well, that point just arrived
and guess what? A surprise: some bugs were discovered.

The procps_pids_select function established a for loop
wherein readproc is called until the passed 'maxthese'
limit. Unfortunately this was incorrect for 2 reasons:

1. For PROCPS_FILL_PID results are limited by what the
oldlib finds, having established the pid list at open.
Total found already cannot exceed a passed 'maxthese';

2. With PROCPS_FILL_UID, returned results could exceed
a 'maxthese' thus making the for loop incorrect again.

[ plus yours truly neglected to forward the required ]
[ UIDs total to our old library, another oops biggie ]

In summary: the loop should have been forever, exiting
only when all those identified procs had been located.

So, while addressing those bugs, I've consolidated all
the retrieval code (initialize, iterate, summarize) in
a single helper function which will now serve both the
procps_pids_reap and select functions. And as a result
those guys were reduced to quite trivial housekeeping.

This patch, hopefully, completes the normalization for
reap/select (fill), which began with references shown.

Reference(s):
commit 0c953eccc5
commit 747dfc5987

Signed-off-by: Jim Warner <james.warner@comcast.net>
2015-10-09 21:35:04 +11:00
Jim Warner
99a657b365 ps: miscellaneous accumulated changes to comments only
With the conversion to the new <pids> interface, a few
comments (only) are being adjusted, as detailed below.

. Escapes '\' crept into some comments containing '|'.

. For consistency, add '.' dot qualifier to a comment.

Signed-off-by: Jim Warner <james.warner@comcast.net>
2015-10-09 21:33:51 +11:00
Jim Warner
0354fc1c8f library: miscellaneous minor accumulated <pids> tweaks
This patch contains the following minor modifications:

. When assigning to boot_seconds from a double, a cast
to 'unsigned long' was employed that in reality should
have been 'unsigned long long'. But, on second thought
it's probably best if the compiler makes the decision.

. Results for ID_TGID do not require an 'f_status' flg
since both tid and tgid will be available by virtue of
the 'simple_nextpid' function normal operations. Thus,
that flag has been removed from the <pids> Item_table.

. When the pids_stacks structure was eliminated with a
change to the alloc/dealloc functions in the reference
below, several casts became redundant and are removed.

Reference(s):
commit 747dfc5987.

Signed-off-by: Jim Warner <james.warner@comcast.net>
2015-10-09 21:33:14 +11:00
Jim Warner
584028dbe5 ps: exploit those new <pids> task/threads capabilities
This commit represents the ps transition to the <pids>
'stacks' interface. While an effort to minimize impact
on existing code was made (as with a disguised proc_t)
the changes were still extensive. Along the way, a few
modifications beyond simply conversion were also made.

------------------------------------------------------
Here's a brief overview the design of this conversion:

. The need to satisfy relative enum requirements could
not easily have been made table driven since any entry
in the format_array might require several <pids> items
in support. So I decided to allow every print function
to contribute its own relative enums once the decision
as to exactly what will be printed had been finalized.

. A similar approach was taken for sorting, since it's
possible to have sort keys that will not be displayed.
Here, I relied on the existing print extensions above.

. In summary, just prior to printing ps walks thru two
lists one time (the format_list & sort_list) and calls
each print function. That function does not print, but
sets its required enum if necessary. Later, when those
same functions are called repeatedly for every printed
line, the only overhead will be an if test and branch.

------------------------------------------------------
Below is a summary of major changes beyond conversion:

. Sorts are now the responsibility of the library. And
therefore the total # of sortable fields substantially
increased without effort. Additionally, several quirky
fields remain as sortable, even though they can't ever
be printed(?). Surely that must make sense to someone.

[ while on this subject of sort, please do *not* try ]
[ to sort old ps on 'args'. or better yet, if you do ]
[ try that sort, see if you can determine his order, ]
[ without peeking at the source. that one hurts yet! ]

. All logic dealing with the old openproc flags and ps
struct members known as 'need' have been whacked since
that entire area was solely the new library's concern.

. Remaining malloc/calloc calls to stdlib were changed
to xmalloc/xcalloc from our own include/xalloc.h file.
None of the replaced calls ever checked return values.

[ be aware that 2 minor potential memory leaks exist ]
[ depending on command line arguments. no attempt is ]
[ made to free dynamically acquired format/sort node ]
[ structures upon return; a conscious design choice. ]

Signed-off-by: Jim Warner <james.warner@comcast.net>
2015-10-05 21:52:08 +11:00
Jim Warner
468c15caa6 top: adapt for normailzed <pids> select/fill interface
Signed-off-by: Jim Warner <james.warner@comcast.net>
2015-10-05 21:50:23 +11:00
Jim Warner
a7153fe49f pmap: adapt to normailzed <pids> select/fill interface
Signed-off-by: Jim Warner <james.warner@comcast.net>
2015-10-05 21:50:01 +11:00
Jim Warner
747dfc5987 library: privatize two with <pids> select/fill changes
After simplifying that select/fill interface, there is
no longer a need for public 'alloc' & 'dealloc' stacks
functions. There is now only one instance of stacks as
an input parameter found in procps_pids_stacks_sort().
But sorting 'empty' stacks serves no possible purpose.

So this commit retains both functions, since they will
still be needed, but designates them private (static).

Additionally, with their demise we will eliminate that
pids_stacks structure from the header file, internally
using what always was the true 'stacks_extent' struct.

Signed-off-by: Jim Warner <james.warner@comcast.net>
2015-10-05 21:48:45 +11:00
Jim Warner
0c953eccc5 library: normalize the <pids> fill/selection interface
After wrestling with the conversion of both top and ps
the differences between reap (all) & fill (select) has
become increasingly inconvenient. So this patch simply
normalizes that API making returned results identical.

The former procps_pids_stacks_fill identifier will now
be known as procps_pids_select which serves as logical
counterpart to the existing procps_pids_reap function.

Signed-off-by: Jim Warner <james.warner@comcast.net>
2015-10-05 21:47:50 +11:00
Jim Warner
30997b967a library: add <pids> TIME_ALL/TIME_ELAPSED needed by ps
Shoot, here's yet another bow to ps needs. But it's ok
because it makes a lot of sense. Rather than force all
users into their own calculations do but it once here.

As an aside this need arose during ps testing when the
sorts were using TIME_START or TICS_ALL. That was just
fine for almost every need except 'etime' plus 'time'.

That 'etime' was sorting the opposite of what's wanted
when using TIME_START (of course) while 'time' yielded
some weird ordering because TICS_ALL was too granular.

Signed-off-by: Jim Warner <james.warner@comcast.net>
2015-10-05 21:42:07 +11:00
Jim Warner
042cfa71e7 library: add abbreviated TTY_NUMBER to that <pids> API
While not documented in the man page, ps allows 'tty4'
as a valid output specifier complimenting 'tty8' & its
derivatives. So, in order to eliminate a dev_to_name()
call in the ps program the library will now offer this
abbreviated tty version (consisting of a number only).

Signed-off-by: Jim Warner <james.warner@comcast.net>
2015-10-05 21:39:37 +11:00
Jim Warner
d66000588a library: the <pids> API now supports 'extra' enum sort
The 'PROCPS_PIDS_extra' enumerator already enjoys some
special place wherein it's zeroed with each iteration.

This patch simply extends the special handling to also
include support for sorting. It will be treated as the
'ull_int' data type, since that encompasses the entire
scope of that union within all pids_result structures.

[ plus, we've also corrected the actual 'extra' name ]

This change was prompted by the conversion of ps which
needs that enumerator to store the former 'pcpu' data,
so it will be available for sorting (not for display).

Signed-off-by: Jim Warner <james.warner@comcast.net>
2015-10-05 21:37:08 +11:00