80486DX2-66/SMART-open-study
1
0
Fork 0
mirror of https://github.com/bsdhw/SMART.git synced 2025-05-31 16:21:41 +05:30
Code Issues Activity
Files
master
SMART-open-study/HDD/WDC/WD2000/WD2000FYYZ-01UL1B1/52FFC30506D3
Andrey Ponomarenko b1c41e7edc Update of reports (new: 3637, modified: 0)
2022-03-18 23:39:11 +03:00

328 lines
16 KiB
Plaintext
Raw Permalink Blame History

smartctl 7.2 2021-09-14 r5236 [FreeBSD 13.0-STABLE amd64] (local build)
Copyright (C) 2002-20, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Model Family: Western Digital Re
Device Model: WDC WD2000FYYZ-01UL1B1
Serial Number: --
LU WWN Device Id: 5 0014ee ...
Firmware Version: 01.01K02
User Capacity: 2,000,398,934,016 bytes [2.00 TB]
Sector Size: 512 bytes logical/physical
Rotation Rate: 7200 rpm
Device is: In smartctl database [for details use: -P show]
ATA Version is: ATA8-ACS (minor revision not indicated)
SATA Version is: SATA 3.0, 6.0 Gb/s (current: 6.0 Gb/s)
Local Time is: Sun Nov 21 00:59:26 2021 +03
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
AAM feature is: Unavailable
APM level is: 128 (minimum power consumption without standby)
Rd look-ahead is: Enabled
Write cache is: Enabled
DSN feature is: Unavailable
ATA Security is: Disabled, frozen [SEC2]
Wt Cache Reorder: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x84) Offline data collection activity
was suspended by an interrupting command from host.
Auto Offline Data Collection: Enabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: (26280) seconds.
Offline data collection
capabilities: (0x7b) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 2) minutes.
Extended self-test routine
recommended polling time: ( 287) minutes.
Conveyance self-test routine
recommended polling time: ( 5) minutes.
SCT capabilities: (0x70bd) SCT Status supported.
SCT Error Recovery Control supported.
SCT Feature Control supported.
SCT Data Table supported.
SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE
1 Raw_Read_Error_Rate POSR-K 200 199 051 - 0
3 Spin_Up_Time POS--K 169 169 021 - 6525
4 Start_Stop_Count -O--CK 100 100 000 - 7
5 Reallocated_Sector_Ct PO--CK 194 194 140 - 199
7 Seek_Error_Rate -OSR-K 200 200 000 - 0
9 Power_On_Hours -O--CK 007 007 000 - 68264
10 Spin_Retry_Count -O--CK 100 253 000 - 0
11 Calibration_Retry_Count -O--CK 100 253 000 - 0
12 Power_Cycle_Count -O--CK 100 100 000 - 7
183 Runtime_Bad_Block -O--CK 100 100 000 - 0
192 Power-Off_Retract_Count -O--CK 200 200 000 - 3
193 Load_Cycle_Count -O--CK 200 200 000 - 54
194 Temperature_Celsius -O---K 103 096 000 - 47
196 Reallocated_Event_Count -O--CK 194 194 000 - 6
197 Current_Pending_Sector -O--CK 200 200 000 - 0
198 Offline_Uncorrectable ----CK 200 200 000 - 0
199 UDMA_CRC_Error_Count -O--CK 200 200 000 - 0
200 Multi_Zone_Error_Rate ---R-- 200 200 000 - 0
||||||_ K auto-keep
|||||__ C event count
||||___ R error rate
|||____ S speed/performance
||_____ O updated online
|______ P prefailure warning
General Purpose Log Directory Version 1
SMART Log Directory Version 1 [multi-sector log support]
Address Access R/W Size Description
0x00 GPL,SL R/O 1 Log Directory
0x01 SL R/O 1 Summary SMART error log
0x02 SL R/O 5 Comprehensive SMART error log
0x03 GPL R/O 6 Ext. Comprehensive SMART error log
0x06 SL R/O 1 SMART self-test log
0x07 GPL R/O 1 Extended self-test log
0x08 GPL R/O 2 Power Conditions log
0x09 SL R/W 1 Selective self-test log
0x10 GPL R/O 1 NCQ Command Error log
0x11 GPL R/O 1 SATA Phy Event Counters log
0x24 GPL R/O 1 Current Device Internal Status Data log
0x80-0x9f GPL,SL R/W 16 Host vendor specific log
0xa0-0xa7 GPL,SL VS 16 Device vendor specific log
0xa8-0xb7 GPL,SL VS 1 Device vendor specific log
0xbd GPL,SL VS 1 Device vendor specific log
0xc0 GPL,SL VS 1 Device vendor specific log
0xc1 GPL VS 24 Device vendor specific log
0xe0 GPL,SL R/W 1 SCT Command/Status
0xe1 GPL,SL R/W 1 SCT Data Transfer
SMART Extended Comprehensive Error Log Version: 1 (6 sectors)
Device Error Count: 30 (device log contains only the most recent 24 errors)
CR = Command Register
FEATR = Features Register
COUNT = Count (was: Sector Count) Register
LBA_48 = Upper bytes of LBA High/Mid/Low Registers ] ATA-8
LH = LBA High (was: Cylinder High) Register ] LBA
LM = LBA Mid (was: Cylinder Low) Register ] Register
LL = LBA Low (was: Sector Number) Register ]
DV = Device (was: Device/Head) Register
DC = Device Control Register
ER = Error register
ST = Status register
Powered_Up_Time is measured from power on, and printed as
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
SS=sec, and sss=millisec. It "wraps" after 49.710 days.
Error 30 [5] occurred at disk power-on lifetime: 2061 hours (85 days + 21 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
40 -- 51 00 00 00 00 e7 e1 36 5d 40 00 Error: WP at LBA = 0xe7e1365d = 3890296413
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
61 00 10 00 70 00 00 88 25 4e 2a 40 08 18d+06:39:34.205 WRITE FPDMA QUEUED
61 00 50 00 68 00 00 88 25 4c 6a 40 08 18d+06:39:34.193 WRITE FPDMA QUEUED
60 01 00 00 60 00 00 e7 e1 35 fa 40 08 18d+06:39:34.193 READ FPDMA QUEUED
2f 00 00 00 01 00 00 00 00 00 10 40 08 18d+06:39:34.192 READ LOG EXT
61 00 50 00 48 00 00 88 25 4c 6a 40 08 18d+06:39:32.007 WRITE FPDMA QUEUED
Error 29 [4] occurred at disk power-on lifetime: 2061 hours (85 days + 21 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
40 -- 51 00 00 00 00 e7 e1 36 5d 40 00 Error: WP at LBA = 0xe7e1365d = 3890296413
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
61 00 50 00 48 00 00 88 25 4c 6a 40 08 18d+06:39:32.007 WRITE FPDMA QUEUED
61 00 20 00 40 00 00 88 24 d4 6a 40 08 18d+06:39:32.002 WRITE FPDMA QUEUED
61 00 10 00 38 00 00 88 24 d4 32 40 08 18d+06:39:32.002 WRITE FPDMA QUEUED
61 00 10 00 30 00 00 88 24 8e c2 40 08 18d+06:39:32.002 WRITE FPDMA QUEUED
61 00 30 00 28 00 00 88 24 8c 52 40 08 18d+06:39:32.002 WRITE FPDMA QUEUED
Error 28 [3] occurred at disk power-on lifetime: 2061 hours (85 days + 21 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
40 -- 51 00 00 00 00 e7 e1 36 5d 40 00 Error: WP at LBA = 0xe7e1365d = 3890296413
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
61 00 30 00 f8 00 00 7c 93 8b 2a 40 08 18d+06:39:29.742 WRITE FPDMA QUEUED
61 00 20 00 f0 00 00 7c 93 8a 3a 40 08 18d+06:39:29.738 WRITE FPDMA QUEUED
61 00 10 00 e8 00 00 7c 93 8a 22 40 08 18d+06:39:29.738 WRITE FPDMA QUEUED
61 00 20 00 e0 00 00 7c 93 89 ca 40 08 18d+06:39:29.737 WRITE FPDMA QUEUED
61 00 08 00 d8 00 00 7c 93 87 ea 40 08 18d+06:39:29.737 WRITE FPDMA QUEUED
Error 27 [2] occurred at disk power-on lifetime: 2061 hours (85 days + 21 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
40 -- 51 00 00 00 00 e7 e1 36 5d 40 00 Error: WP at LBA = 0xe7e1365d = 3890296413
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
61 00 08 00 38 00 00 7a 1c 7c aa 40 08 18d+06:39:27.685 WRITE FPDMA QUEUED
61 00 08 00 30 00 00 7a 1c 7b fa 40 08 18d+06:39:27.685 WRITE FPDMA QUEUED
61 00 08 00 28 00 00 7a 1c 7b da 40 08 18d+06:39:27.685 WRITE FPDMA QUEUED
61 00 08 00 20 00 00 7a 1c 7b a2 40 08 18d+06:39:27.685 WRITE FPDMA QUEUED
61 00 08 00 18 00 00 7a 1c 7a aa 40 08 18d+06:39:27.685 WRITE FPDMA QUEUED
Error 26 [1] occurred at disk power-on lifetime: 2061 hours (85 days + 21 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
40 -- 51 00 00 00 00 e7 e1 36 5d 40 00 Error: UNC at LBA = 0xe7e1365d = 3890296413
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
60 01 00 00 d0 00 00 e7 e1 35 fa 40 08 18d+06:39:25.640 READ FPDMA QUEUED
60 00 08 00 c8 00 00 7b 20 d8 52 40 08 18d+06:39:25.640 READ FPDMA QUEUED
60 01 00 00 c0 00 00 8f 9e 96 52 40 08 18d+06:39:25.639 READ FPDMA QUEUED
60 00 58 00 b8 00 00 8e 9a 34 8a 40 08 18d+06:39:25.639 READ FPDMA QUEUED
60 00 08 00 b0 00 00 7b 20 d8 52 40 08 18d+06:39:25.638 READ FPDMA QUEUED
Error 25 [0] occurred at disk power-on lifetime: 2061 hours (85 days + 21 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
40 -- 51 00 00 00 00 e7 fe d6 f9 40 00 Error: UNC at LBA = 0xe7fed6f9 = 3892238073
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
60 01 00 00 50 00 00 e7 fe d6 02 40 08 18d+06:33:26.278 READ FPDMA QUEUED
2f 00 00 00 01 00 00 00 00 00 10 40 08 18d+06:33:26.278 READ LOG EXT
60 01 00 00 40 00 00 e7 fe d6 02 40 08 18d+06:33:24.405 READ FPDMA QUEUED
2f 00 00 00 01 00 00 00 00 00 10 40 08 18d+06:33:24.405 READ LOG EXT
60 01 00 00 30 00 00 e7 fe d6 02 40 08 18d+06:33:22.532 READ FPDMA QUEUED
Error 24 [23] occurred at disk power-on lifetime: 2061 hours (85 days + 21 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
40 -- 51 00 00 00 00 e7 fe d6 f9 40 00 Error: UNC at LBA = 0xe7fed6f9 = 3892238073
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
60 01 00 00 40 00 00 e7 fe d6 02 40 08 18d+06:33:24.405 READ FPDMA QUEUED
2f 00 00 00 01 00 00 00 00 00 10 40 08 18d+06:33:24.405 READ LOG EXT
60 01 00 00 30 00 00 e7 fe d6 02 40 08 18d+06:33:22.532 READ FPDMA QUEUED
2f 00 00 00 01 00 00 00 00 00 10 40 08 18d+06:33:22.531 READ LOG EXT
60 01 00 00 20 00 00 e7 fe d6 02 40 08 18d+06:33:20.659 READ FPDMA QUEUED
Error 23 [22] occurred at disk power-on lifetime: 2061 hours (85 days + 21 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
40 -- 51 00 00 00 00 e7 fe d6 f9 40 00 Error: UNC at LBA = 0xe7fed6f9 = 3892238073
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
60 01 00 00 30 00 00 e7 fe d6 02 40 08 18d+06:33:22.532 READ FPDMA QUEUED
2f 00 00 00 01 00 00 00 00 00 10 40 08 18d+06:33:22.531 READ LOG EXT
60 01 00 00 20 00 00 e7 fe d6 02 40 08 18d+06:33:20.659 READ FPDMA QUEUED
2f 00 00 00 01 00 00 00 00 00 10 40 08 18d+06:33:20.658 READ LOG EXT
60 01 00 00 10 00 00 e7 fe d6 02 40 08 18d+06:33:18.808 READ FPDMA QUEUED
SMART Extended Self-test Log Version: 1 (1 sectors)
Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
# 1 Extended offline Completed without error 00% 4 -
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
SCT Status Version: 3
SCT Version (vendor specific): 258 (0x0102)
Device State: Active (0)
Current Temperature: 47 Celsius
Power Cycle Min/Max Temperature: 43/54 Celsius
Lifetime Min/Max Temperature: 23/54 Celsius
Under/Over Temperature Limit Count: 0/0
Vendor specific:
01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
SCT Temperature History Version: 2
Temperature Sampling Period: 1 minute
Temperature Logging Interval: 1 minute
Min/Max recommended Temperature: 0/60 Celsius
Min/Max Temperature Limit: -41/85 Celsius
Temperature History Size (Index): 478 (220)
SCT Error Recovery Control:
Read: 70 (7.0 seconds)
Write: 70 (7.0 seconds)
Device Statistics (GP/SMART Log 0x04) not supported
Pending Defects log (GP Log 0x0c) not supported
SATA Phy Event Counters (GP Log 0x11)
ID Size Value Description
0x0001 2 0 Command failed due to ICRC error
0x0002 2 0 R_ERR response for data FIS
0x0003 2 0 R_ERR response for device-to-host data FIS
0x0004 2 0 R_ERR response for host-to-device data FIS
0x0005 2 0 R_ERR response for non-data FIS
0x0006 2 0 R_ERR response for device-to-host non-data FIS
0x0007 2 0 R_ERR response for host-to-device non-data FIS
0x0008 2 0 Device-to-host non-data FIS retries
0x0009 2 33 Transition from drive PhyRdy to drive PhyNRdy
0x000a 2 34 Device-to-host register FISes sent due to a COMRESET
0x000b 2 0 CRC errors within host-to-device FIS
0x000f 2 0 R_ERR response for host-to-device data FIS, CRC
0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC
0x8000 4 8275465 Vendor specific
View Git Blame Copy Permalink