80486DX2-66/SMART-open-study
1
0
Fork 0
mirror of https://github.com/bsdhw/SMART.git synced 2025-05-31 16:21:41 +05:30
Code Issues Activity
Files
master
SMART-open-study/HDD/WDC/WD2000/WD2000FYYZ-01UL1B2/FC470FE3629A
Andrey Ponomarenko 9495463568 Update of reports (new: 194, modified: 0)
2021-06-01 07:24:02 +03:00

326 lines
16 KiB
Plaintext
Raw Permalink Blame History

smartctl 7.2 2020-12-30 r5155 [FreeBSD 12.2-RELEASE-p3 amd64] (local build)
Copyright (C) 2002-20, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Model Family: Western Digital Re
Device Model: WDC WD2000FYYZ-01UL1B2
Serial Number: --
LU WWN Device Id: 5 0014ee ...
Firmware Version: 01.01K03
User Capacity: 2,000,398,934,016 bytes [2.00 TB]
Sector Size: 512 bytes logical/physical
Rotation Rate: 7200 rpm
Device is: In smartctl database [for details use: -P show]
ATA Version is: ATA8-ACS (minor revision not indicated)
SATA Version is: SATA 3.0, 6.0 Gb/s (current: 6.0 Gb/s)
Local Time is: Wed May 26 10:57:37 2021 BST
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
AAM feature is: Unavailable
APM level is: 254 (maximum performance)
Rd look-ahead is: Enabled
Write cache is: Enabled
DSN feature is: Unavailable
ATA Security is: Disabled, frozen [SEC2]
Wt Cache Reorder: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x82) Offline data collection activity
was completed without error.
Auto Offline Data Collection: Enabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: (25500) seconds.
Offline data collection
capabilities: (0x7b) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 2) minutes.
Extended self-test routine
recommended polling time: ( 278) minutes.
Conveyance self-test routine
recommended polling time: ( 5) minutes.
SCT capabilities: (0x70bd) SCT Status supported.
SCT Error Recovery Control supported.
SCT Feature Control supported.
SCT Data Table supported.
SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE
1 Raw_Read_Error_Rate POSR-K 200 200 051 - 0
3 Spin_Up_Time POS--K 169 169 021 - 6525
4 Start_Stop_Count -O--CK 100 100 000 - 11
5 Reallocated_Sector_Ct PO--CK 200 200 140 - 0
7 Seek_Error_Rate -OSR-K 200 200 000 - 0
9 Power_On_Hours -O--CK 060 060 000 - 29866
10 Spin_Retry_Count -O--CK 100 253 000 - 0
11 Calibration_Retry_Count -O--CK 100 253 000 - 0
12 Power_Cycle_Count -O--CK 100 100 000 - 11
183 Runtime_Bad_Block -O--CK 100 100 000 - 0
192 Power-Off_Retract_Count -O--CK 200 200 000 - 0
193 Load_Cycle_Count -O--CK 200 200 000 - 10
194 Temperature_Celsius -O---K 119 115 000 - 31
196 Reallocated_Event_Count -O--CK 200 200 000 - 0
197 Current_Pending_Sector -O--CK 200 200 000 - 0
198 Offline_Uncorrectable ----CK 200 200 000 - 0
199 UDMA_CRC_Error_Count -O--CK 200 200 000 - 0
200 Multi_Zone_Error_Rate ---R-- 200 200 000 - 0
||||||_ K auto-keep
|||||__ C event count
||||___ R error rate
|||____ S speed/performance
||_____ O updated online
|______ P prefailure warning
General Purpose Log Directory Version 1
SMART Log Directory Version 1 [multi-sector log support]
Address Access R/W Size Description
0x00 GPL,SL R/O 1 Log Directory
0x01 SL R/O 1 Summary SMART error log
0x02 SL R/O 5 Comprehensive SMART error log
0x03 GPL R/O 6 Ext. Comprehensive SMART error log
0x06 SL R/O 1 SMART self-test log
0x07 GPL R/O 1 Extended self-test log
0x08 GPL R/O 2 Power Conditions log
0x09 SL R/W 1 Selective self-test log
0x10 GPL R/O 1 NCQ Command Error log
0x11 GPL R/O 1 SATA Phy Event Counters log
0x24 GPL R/O 1 Current Device Internal Status Data log
0x80-0x9f GPL,SL R/W 16 Host vendor specific log
0xa0-0xa7 GPL,SL VS 16 Device vendor specific log
0xa8-0xb7 GPL,SL VS 1 Device vendor specific log
0xbd GPL,SL VS 1 Device vendor specific log
0xc0 GPL,SL VS 1 Device vendor specific log
0xc1 GPL VS 24 Device vendor specific log
0xe0 GPL,SL R/W 1 SCT Command/Status
0xe1 GPL,SL R/W 1 SCT Data Transfer
SMART Extended Comprehensive Error Log Version: 1 (6 sectors)
Device Error Count: 7
CR = Command Register
FEATR = Features Register
COUNT = Count (was: Sector Count) Register
LBA_48 = Upper bytes of LBA High/Mid/Low Registers ] ATA-8
LH = LBA High (was: Cylinder High) Register ] LBA
LM = LBA Mid (was: Cylinder Low) Register ] Register
LL = LBA Low (was: Sector Number) Register ]
DV = Device (was: Device/Head) Register
DC = Device Control Register
ER = Error register
ST = Status register
Powered_Up_Time is measured from power on, and printed as
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
SS=sec, and sss=millisec. It "wraps" after 49.710 days.
Error 7 [6] occurred at disk power-on lifetime: 6218 hours (259 days + 2 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
40 -- 51 00 00 00 00 02 1e 4d 2c 40 00 Error: UNC at LBA = 0x021e4d2c = 35540268
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
60 04 00 00 08 00 00 02 1e 4a 00 40 08 39d+23:42:16.646 READ FPDMA QUEUED
61 00 01 00 00 00 00 02 10 18 08 40 08 39d+23:42:16.646 WRITE FPDMA QUEUED
ea 00 00 00 00 00 00 00 00 00 00 e0 08 39d+23:42:16.630 FLUSH CACHE EXT
60 04 00 00 e0 00 00 02 1e 46 00 40 08 39d+23:42:16.461 READ FPDMA QUEUED
60 04 00 00 d8 00 00 02 1e 42 00 40 08 39d+23:42:16.434 READ FPDMA QUEUED
Error 6 [5] occurred at disk power-on lifetime: 5908 hours (246 days + 4 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
40 -- 51 00 00 00 00 02 1e 62 06 40 00 Error: UNC at LBA = 0x021e6206 = 35545606
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
60 04 00 00 d8 00 00 02 1e 61 00 40 08 27d+01:46:21.813 READ FPDMA QUEUED
60 04 00 00 d0 00 00 02 1e 5d 00 40 08 27d+01:46:21.810 READ FPDMA QUEUED
60 04 00 00 c8 00 00 02 1e 59 00 40 08 27d+01:46:21.807 READ FPDMA QUEUED
60 04 00 00 c0 00 00 02 1e 55 00 40 08 27d+01:46:21.795 READ FPDMA QUEUED
60 04 00 00 b8 00 00 02 1e 51 00 40 08 27d+01:46:21.792 READ FPDMA QUEUED
Error 5 [4] occurred at disk power-on lifetime: 5908 hours (246 days + 4 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
40 -- 51 00 00 00 00 02 1e 03 9b 40 00 Error: UNC at LBA = 0x021e039b = 35521435
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
60 04 00 00 d0 00 00 02 1e 03 00 40 08 27d+01:46:17.102 READ FPDMA QUEUED
60 04 00 00 c8 00 00 02 1d ff 00 40 08 27d+01:46:17.092 READ FPDMA QUEUED
60 04 00 00 c0 00 00 02 1d fb 00 40 08 27d+01:46:17.087 READ FPDMA QUEUED
60 04 00 00 b8 00 00 02 1d f7 00 40 08 27d+01:46:17.068 READ FPDMA QUEUED
61 00 08 00 b0 00 00 8f 18 1d b8 40 08 27d+01:46:17.068 WRITE FPDMA QUEUED
Error 4 [3] occurred at disk power-on lifetime: 6088 hours (253 days + 16 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
40 -- 51 00 00 00 00 02 1e 37 bd 40 00 Error: UNC at LBA = 0x021e37bd = 35534781
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
60 04 00 00 30 00 00 02 1e 37 00 40 08 34d+12:59:02.840 READ FPDMA QUEUED
60 04 00 00 28 00 00 02 1e 33 00 40 08 34d+12:59:02.837 READ FPDMA QUEUED
60 04 00 00 20 00 00 02 1e 2f 00 40 08 34d+12:59:02.834 READ FPDMA QUEUED
60 04 00 00 18 00 00 02 1e 2b 00 40 08 34d+12:59:02.827 READ FPDMA QUEUED
60 04 00 00 10 00 00 02 1e 27 00 40 08 34d+12:59:02.826 READ FPDMA QUEUED
Error 3 [2] occurred at disk power-on lifetime: 6537 hours (272 days + 9 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
40 -- 51 00 00 00 00 02 1e 57 98 40 00 Error: UNC at LBA = 0x021e5798 = 35542936
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
60 04 00 00 f0 00 00 02 1e 56 80 40 08 3d+13:41:59.260 READ FPDMA QUEUED
60 04 00 00 e8 00 00 02 1e 52 80 40 08 3d+13:41:59.247 READ FPDMA QUEUED
ea 00 00 00 00 00 00 00 00 00 00 e0 08 3d+13:41:59.240 FLUSH CACHE EXT
60 04 00 00 d0 00 00 02 1e 4e 80 40 08 3d+13:41:59.239 READ FPDMA QUEUED
61 00 08 00 c8 00 00 75 5b 82 a0 40 08 3d+13:41:59.239 WRITE FPDMA QUEUED
Error 2 [1] occurred at disk power-on lifetime: 6537 hours (272 days + 9 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
40 -- 51 00 00 00 00 02 1e 2d 53 40 00 Error: UNC at LBA = 0x021e2d53 = 35532115
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
60 04 00 00 58 00 00 02 1e 2b 00 40 08 3d+13:41:54.952 READ FPDMA QUEUED
61 00 08 00 50 00 00 19 bf 9f 08 40 08 3d+13:41:54.952 WRITE FPDMA QUEUED
60 04 00 00 48 00 00 02 1e 27 00 40 08 3d+13:41:54.951 READ FPDMA QUEUED
ea 00 00 00 00 00 00 00 00 00 00 e0 08 3d+13:41:54.949 FLUSH CACHE EXT
60 04 00 00 30 00 00 02 1e 23 00 40 08 3d+13:41:54.948 READ FPDMA QUEUED
Error 1 [0] occurred at disk power-on lifetime: 6268 hours (261 days + 4 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
40 -- 51 00 00 00 00 02 1e 4d 2c 40 00 Error: UNC at LBA = 0x021e4d2c = 35540268
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
60 04 00 00 b0 00 00 02 1e 4b 00 40 08 42d+01:11:41.452 READ FPDMA QUEUED
60 04 00 00 a8 00 00 02 1e 47 00 40 08 42d+01:11:41.449 READ FPDMA QUEUED
60 04 00 00 a0 00 00 02 1e 43 00 40 08 42d+01:11:41.446 READ FPDMA QUEUED
60 04 00 00 98 00 00 02 1e 3f 00 40 08 42d+01:11:41.439 READ FPDMA QUEUED
ea 00 00 00 00 00 00 00 00 00 00 e0 08 42d+01:11:41.427 FLUSH CACHE EXT
SMART Extended Self-test Log Version: 1 (1 sectors)
Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
# 1 Extended offline Completed without error 00% 13701 -
# 2 Extended offline Completed without error 00% 13684 -
# 3 Extended offline Completed without error 00% 11405 -
# 4 Extended offline Completed without error 00% 11388 -
# 5 Extended offline Completed without error 00% 11261 -
# 6 Extended offline Completed without error 00% 11244 -
# 7 Extended offline Completed without error 00% 1037 -
# 8 Extended offline Completed without error 00% 961 -
# 9 Short offline Completed without error 00% 882 -
#10 Short offline Completed without error 00% 858 -
#11 Short offline Completed without error 00% 835 -
#12 Short offline Completed without error 00% 811 -
#13 Short offline Completed without error 00% 787 -
#14 Short offline Completed without error 00% 763 -
#15 Short offline Completed without error 00% 739 -
#16 Short offline Completed without error 00% 715 -
#17 Short offline Completed without error 00% 691 -
#18 Short offline Completed without error 00% 667 -
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
SCT Status Version: 3
SCT Version (vendor specific): 258 (0x0102)
Device State: Active (0)
Current Temperature: 31 Celsius
Power Cycle Min/Max Temperature: 24/35 Celsius
Lifetime Min/Max Temperature: 22/37 Celsius
Under/Over Temperature Limit Count: 0/0
Vendor specific:
01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
SCT Temperature History Version: 2
Temperature Sampling Period: 1 minute
Temperature Logging Interval: 1 minute
Min/Max recommended Temperature: 0/60 Celsius
Min/Max Temperature Limit: -41/85 Celsius
Temperature History Size (Index): 478 (53)
SCT Error Recovery Control:
Read: 70 (7.0 seconds)
Write: 70 (7.0 seconds)
Device Statistics (GP/SMART Log 0x04) not supported
Pending Defects log (GP Log 0x0c) not supported
SATA Phy Event Counters (GP Log 0x11)
ID Size Value Description
0x0001 2 0 Command failed due to ICRC error
0x0002 2 0 R_ERR response for data FIS
0x0003 2 0 R_ERR response for device-to-host data FIS
0x0004 2 0 R_ERR response for host-to-device data FIS
0x0005 2 0 R_ERR response for non-data FIS
0x0006 2 0 R_ERR response for device-to-host non-data FIS
0x0007 2 0 R_ERR response for host-to-device non-data FIS
0x0008 2 0 Device-to-host non-data FIS retries
0x0009 2 137 Transition from drive PhyRdy to drive PhyNRdy
0x000a 2 138 Device-to-host register FISes sent due to a COMRESET
0x000b 2 0 CRC errors within host-to-device FIS
0x000f 2 0 R_ERR response for host-to-device data FIS, CRC
0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC
0x8000 4 58165527 Vendor specific
View Git Blame Copy Permalink