80486DX2-66/SMART-open-study
1
0
Fork 0
mirror of https://github.com/bsdhw/SMART.git synced 2025-05-31 16:21:41 +05:30
Code Issues Activity
Files
master
SMART-open-study/HDD/WDC/WD2502/WD2502ABYS-18B7A0/1E8B05A20007
Andrey Ponomarenko 8c515ea896 Update of reports (new: 35, modified: 3308)
2025-01-05 02:37:11 +03:00

302 lines
15 KiB
Plaintext
Raw Permalink Blame History

smartctl 7.4 2023-08-01 r5530 [FreeBSD 13.2-RELEASE-p11 amd64] (local build)
Copyright (C) 2002-23, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Model Family: Western Digital RE3 Serial ATA
Device Model: WDC WD2502ABYS-18B7A0
Serial Number: --
LU WWN Device Id: 5 0014ee ...
Add. Product Id: DELL™
Firmware Version: 02.03B04
User Capacity: 250,000,000,000 bytes [250 GB]
Sector Size: 512 bytes logical/physical
Rotation Rate: 7200 rpm
Device is: In smartctl database 7.3/5528
ATA Version is: ATA8-ACS (minor revision not indicated)
SATA Version is: SATA 2.5, 3.0 Gb/s
Local Time is: Fri Apr 5 17:10:21 2024 UTC
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
AAM feature is: Disabled
APM feature is: Unavailable
Rd look-ahead is: Enabled
Write cache is: Enabled
DSN feature is: Unavailable
ATA Security is: Disabled, frozen [SEC2]
Wt Cache Reorder: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x84) Offline data collection activity
was suspended by an interrupting command from host.
Auto Offline Data Collection: Enabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: ( 4680) seconds.
Offline data collection
capabilities: (0x7b) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 2) minutes.
Extended self-test routine
recommended polling time: ( 58) minutes.
Conveyance self-test routine
recommended polling time: ( 5) minutes.
SCT capabilities: (0x303f) SCT Status supported.
SCT Error Recovery Control supported.
SCT Feature Control supported.
SCT Data Table supported.
SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE
1 Raw_Read_Error_Rate POSR-K 200 200 051 - 0
3 Spin_Up_Time POS--K 200 199 021 - 966
4 Start_Stop_Count -O--CK 100 100 000 - 127
5 Reallocated_Sector_Ct PO--CK 200 200 140 - 0
7 Seek_Error_Rate -OSR-K 200 200 000 - 0
9 Power_On_Hours -O--CK 001 001 000 - 117079
10 Spin_Retry_Count -O--CK 100 100 000 - 0
11 Calibration_Retry_Count -O--CK 100 100 000 - 0
12 Power_Cycle_Count -O--CK 100 100 000 - 125
192 Power-Off_Retract_Count -O--CK 200 200 000 - 112
193 Load_Cycle_Count -O--CK 200 200 000 - 127
194 Temperature_Celsius -O---K 111 090 000 - 32
196 Reallocated_Event_Count -O--CK 200 200 000 - 0
197 Current_Pending_Sector -O--CK 200 200 000 - 0
198 Offline_Uncorrectable ----CK 100 253 000 - 0
199 UDMA_CRC_Error_Count -O--CK 200 200 000 - 0
200 Multi_Zone_Error_Rate ---R-- 200 200 000 - 0
||||||_ K auto-keep
|||||__ C event count
||||___ R error rate
|||____ S speed/performance
||_____ O updated online
|______ P prefailure warning
General Purpose Log Directory Version 1
SMART Log Directory Version 1 [multi-sector log support]
Address Access R/W Size Description
0x00 GPL,SL R/O 1 Log Directory
0x01 SL R/O 1 Summary SMART error log
0x02 SL R/O 5 Comprehensive SMART error log
0x03 GPL R/O 6 Ext. Comprehensive SMART error log
0x06 SL R/O 1 SMART self-test log
0x07 GPL R/O 1 Extended self-test log
0x09 SL R/W 1 Selective self-test log
0x10 GPL R/O 1 NCQ Command Error log
0x11 GPL R/O 1 SATA Phy Event Counters log
0x80-0x9f GPL,SL R/W 16 Host vendor specific log
0xa0-0xa7 GPL,SL VS 16 Device vendor specific log
0xa8-0xb5 GPL,SL VS 1 Device vendor specific log
0xb6 GPL VS 1 Device vendor specific log
0xb7 GPL,SL VS 1 Device vendor specific log
0xc0 GPL,SL VS 1 Device vendor specific log
0xc1 GPL VS 24 Device vendor specific log
0xe0 GPL,SL R/W 1 SCT Command/Status
0xe1 GPL,SL R/W 1 SCT Data Transfer
SMART Extended Comprehensive Error Log Version: 1 (6 sectors)
Device Error Count: 7
CR = Command Register
FEATR = Features Register
COUNT = Count (was: Sector Count) Register
LBA_48 = Upper bytes of LBA High/Mid/Low Registers ] ATA-8
LH = LBA High (was: Cylinder High) Register ] LBA
LM = LBA Mid (was: Cylinder Low) Register ] Register
LL = LBA Low (was: Sector Number) Register ]
DV = Device (was: Device/Head) Register
DC = Device Control Register
ER = Error register
ST = Status register
Powered_Up_Time is measured from power on, and printed as
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
SS=sec, and sss=millisec. It "wraps" after 49.710 days.
Error 7 [6] occurred at disk power-on lifetime: 9162 hours (381 days + 18 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
40 -- 51 00 00 00 00 84 00 1d 98 40 00 Error: WP at LBA = 0x84001d98 = 2214600088
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
61 00 18 00 08 00 00 00 66 ec 58 c0 00 7d+01:28:54.634 WRITE FPDMA QUEUED
60 00 10 00 00 00 00 00 1d 84 98 40 00 7d+01:28:53.534 READ FPDMA QUEUED
ea 00 00 00 00 00 00 00 00 00 00 40 00 7d+01:28:53.495 FLUSH CACHE EXT
61 00 08 00 00 00 00 00 66 eb d8 40 00 7d+01:28:53.494 WRITE FPDMA QUEUED
61 00 18 00 00 00 00 00 d0 bf a0 40 00 7d+01:28:53.494 WRITE FPDMA QUEUED
Error 6 [5] occurred at disk power-on lifetime: 9162 hours (381 days + 18 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
10 -- 51 00 00 00 00 eb 00 66 f0 40 00 Error: IDNF at LBA = 0xeb0066f0 = 3942672112
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
61 00 18 00 08 00 00 00 66 eb f0 c0 00 7d+01:23:28.148 WRITE FPDMA QUEUED
60 00 10 00 00 00 00 00 1d b9 e8 40 00 7d+01:23:28.101 READ FPDMA QUEUED
e5 00 00 00 00 00 00 00 00 00 00 00 00 7d+01:23:26.060 CHECK POWER MODE
61 00 08 00 00 00 00 00 6d 50 70 40 00 7d+01:23:25.008 WRITE FPDMA QUEUED
ea 00 00 00 00 00 00 00 00 00 00 40 00 7d+01:23:25.008 FLUSH CACHE EXT
Error 5 [4] occurred at disk power-on lifetime: 9162 hours (381 days + 18 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
40 -- 51 00 00 00 00 b9 00 1d e8 40 00 Error: UNC at LBA = 0xb9001de8 = 3103792616
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
60 00 10 00 08 00 00 00 be 54 a0 40 00 7d+01:21:31.663 READ FPDMA QUEUED
60 00 10 00 00 00 00 00 1d b9 e8 40 00 7d+01:21:30.568 READ FPDMA QUEUED
60 00 10 00 00 00 00 00 be 55 10 40 00 7d+01:21:30.555 READ FPDMA QUEUED
ea 00 00 00 00 00 00 00 00 00 00 40 00 7d+01:21:28.131 FLUSH CACHE EXT
61 00 08 00 00 00 00 00 66 eb f0 40 00 7d+01:21:28.131 WRITE FPDMA QUEUED
Error 4 [3] occurred at disk power-on lifetime: 9162 hours (381 days + 18 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
40 -- 51 00 00 00 00 87 00 1d 28 40 00 Error: UNC at LBA = 0x87001d28 = 2264931624
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
60 00 10 00 00 00 00 00 1d 87 28 40 00 7d+01:18:43.199 READ FPDMA QUEUED
ea 00 00 00 00 00 00 00 00 00 00 40 00 7d+01:18:43.169 FLUSH CACHE EXT
61 00 18 00 00 00 00 00 d1 0d f8 40 00 7d+01:18:43.169 WRITE FPDMA QUEUED
61 00 10 00 00 00 00 00 66 eb f8 c0 00 7d+01:18:43.160 WRITE FPDMA QUEUED
ea 00 00 00 00 00 00 00 00 00 00 40 00 7d+01:18:41.281 FLUSH CACHE EXT
Error 3 [2] occurred at disk power-on lifetime: 9161 hours (381 days + 17 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
40 -- 51 00 00 00 00 87 00 1d 28 40 00 Error: UNC at LBA = 0x87001d28 = 2264931624
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
60 00 10 00 00 00 00 00 1d 87 28 40 00 7d+01:08:33.961 READ FPDMA QUEUED
ea 00 00 00 00 00 00 00 00 00 00 40 00 7d+01:08:33.924 FLUSH CACHE EXT
61 00 38 00 00 00 00 00 66 eb f0 40 00 7d+01:08:33.923 WRITE FPDMA QUEUED
61 00 18 00 00 00 00 01 06 d3 98 40 00 7d+01:08:33.923 WRITE FPDMA QUEUED
ea 00 00 00 00 00 00 00 00 00 00 40 00 7d+01:08:33.514 FLUSH CACHE EXT
Error 2 [1] occurred at disk power-on lifetime: 9161 hours (381 days + 17 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
40 -- 51 00 00 00 00 84 00 1d 98 40 00 Error: UNC at LBA = 0x84001d98 = 2214600088
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
60 00 10 00 00 00 00 00 1d 84 98 40 00 7d+01:03:23.674 READ FPDMA QUEUED
ea 00 00 00 00 00 00 00 00 00 00 40 00 7d+01:03:23.637 FLUSH CACHE EXT
61 00 18 00 00 00 00 00 d0 bf a0 40 00 7d+01:03:23.637 WRITE FPDMA QUEUED
61 00 08 00 00 00 00 00 66 ec 58 c0 00 7d+01:03:23.625 WRITE FPDMA QUEUED
e5 00 00 00 00 00 00 00 00 00 00 00 00 7d+01:03:23.389 CHECK POWER MODE
Error 1 [0] occurred at disk power-on lifetime: 9161 hours (381 days + 17 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
40 -- 51 00 00 00 00 87 00 1d 28 40 00 Error: UNC at LBA = 0x87001d28 = 2264931624
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
60 00 10 00 00 00 00 00 1d 87 28 40 00 7d+00:53:13.682 READ FPDMA QUEUED
ea 00 00 00 00 00 00 00 00 00 00 40 00 7d+00:53:13.657 FLUSH CACHE EXT
61 00 18 00 00 00 00 00 d1 0d f8 40 00 7d+00:53:13.656 WRITE FPDMA QUEUED
61 00 08 00 00 00 00 00 6f 4f f0 40 00 7d+00:53:13.358 WRITE FPDMA QUEUED
61 00 08 00 00 00 00 00 6d f7 d0 40 00 7d+00:53:13.358 WRITE FPDMA QUEUED
SMART Extended Self-test Log Version: 1 (1 sectors)
Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
# 1 Short offline Aborted by host 90% 15083 -
# 2 Extended offline Completed without error 00% 51 -
# 3 Short offline Completed without error 00% 51 -
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
SCT Status Version: 2
SCT Version (vendor specific): 258 (0x0102)
Device State: SMART Off-line Data Collection executing in background (4)
Current Temperature: 32 Celsius
Power Cycle Min/Max Temperature: 28/42 Celsius
Lifetime Min/Max Temperature: 29/53 Celsius
Under/Over Temperature Limit Count: 0/0
SCT Temperature History Version: 2
Temperature Sampling Period: 1 minute
Temperature Logging Interval: 1 minute
Min/Max recommended Temperature: 0/60 Celsius
Min/Max Temperature Limit: -41/85 Celsius
Temperature History Size (Index): 478 (55)
SCT Error Recovery Control:
Read: 80 (8.0 seconds)
Write: 80 (8.0 seconds)
Device Statistics (GP/SMART Log 0x04) not supported
Pending Defects log (GP Log 0x0c) not supported
SATA Phy Event Counters (GP Log 0x11)
ID Size Value Description
0x0001 2 0 Command failed due to ICRC error
0x0002 2 0 R_ERR response for data FIS
0x0003 2 0 R_ERR response for device-to-host data FIS
0x0004 2 0 R_ERR response for host-to-device data FIS
0x0005 2 0 R_ERR response for non-data FIS
0x0006 2 0 R_ERR response for device-to-host non-data FIS
0x0007 2 0 R_ERR response for host-to-device non-data FIS
0x000a 2 6 Device-to-host register FISes sent due to a COMRESET
0x8000 4 4475449 Vendor specific
View Git Blame Copy Permalink