80486DX2-66/SMART-open-study
1
0
Fork 0
mirror of https://github.com/bsdhw/SMART.git synced 2025-05-31 16:21:41 +05:30
Code Issues Activity
Files
master
SMART-open-study/HDD/WDC/WD5000/WD5000BEVT-75A0RT0/BAF97714C070
Andrey Ponomarenko b1c41e7edc Update of reports (new: 3637, modified: 0)
2022-03-18 23:39:11 +03:00

339 lines
17 KiB
Plaintext
Raw Permalink Blame History

smartctl 7.2 2020-12-30 r5155 [FreeBSD 13.0-RELEASE amd64] (local build)
Copyright (C) 2002-20, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Model Family: Western Digital Scorpio Blue Serial ATA
Device Model: WDC WD5000BEVT-75A0RT0
Serial Number: --
LU WWN Device Id: 5 0014ee ...
Firmware Version: 01.01A01
User Capacity: 500,107,862,016 bytes [500 GB]
Sector Size: 512 bytes logical/physical
Rotation Rate: 5400 rpm
Device is: In smartctl database [for details use: -P show]
ATA Version is: ATA8-ACS (minor revision not indicated)
SATA Version is: SATA 2.6, 3.0 Gb/s
Local Time is: Wed Jul 7 21:09:30 2021 +0430
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
AAM level is: 128 (quiet), recommended: 128
APM level is: 128 (minimum power consumption without standby)
Rd look-ahead is: Enabled
Write cache is: Enabled
DSN feature is: Unavailable
ATA Security is: Disabled, frozen [SEC2]
Wt Cache Reorder: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x00) Offline data collection activity
was never started.
Auto Offline Data Collection: Disabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: (12780) seconds.
Offline data collection
capabilities: (0x7b) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 2) minutes.
Extended self-test routine
recommended polling time: ( 149) minutes.
Conveyance self-test routine
recommended polling time: ( 5) minutes.
SCT capabilities: (0x7037) SCT Status supported.
SCT Feature Control supported.
SCT Data Table supported.
SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE
1 Raw_Read_Error_Rate POSR-K 200 200 051 - 328
3 Spin_Up_Time POS--K 192 180 021 - 1375
4 Start_Stop_Count -O--CK 088 088 000 - 12564
5 Reallocated_Sector_Ct PO--CK 200 200 140 - 0
7 Seek_Error_Rate -OSR-K 100 253 000 - 0
9 Power_On_Hours -O--CK 084 084 000 - 12278
10 Spin_Retry_Count -O--CK 100 100 000 - 0
11 Calibration_Retry_Count -O--CK 100 100 000 - 0
12 Power_Cycle_Count -O--CK 088 088 000 - 12193
191 G-Sense_Error_Rate -O--CK 001 001 000 - 8821
192 Power-Off_Retract_Count -O--CK 195 195 000 - 4062
193 Load_Cycle_Count -O--CK 124 124 000 - 230844
194 Temperature_Celsius -O---K 096 078 000 - 51
196 Reallocated_Event_Count -O--CK 200 200 000 - 0
197 Current_Pending_Sector -O--CK 200 200 000 - 0
198 Offline_Uncorrectable ----CK 100 253 000 - 0
199 UDMA_CRC_Error_Count -O--CK 200 200 000 - 1
200 Multi_Zone_Error_Rate ---R-- 200 200 000 - 0
240 Head_Flying_Hours -O--CK 085 085 000 - 11415
241 Total_LBAs_Written -O--CK 200 200 000 - 72320439185
242 Total_LBAs_Read -O--CK 200 200 000 - 93579150021
254 Free_Fall_Sensor -O--CK 200 200 000 - 0
||||||_ K auto-keep
|||||__ C event count
||||___ R error rate
|||____ S speed/performance
||_____ O updated online
|______ P prefailure warning
General Purpose Log Directory Version 1
SMART Log Directory Version 1 [multi-sector log support]
Address Access R/W Size Description
0x00 GPL,SL R/O 1 Log Directory
0x01 SL R/O 1 Summary SMART error log
0x02 SL R/O 5 Comprehensive SMART error log
0x03 GPL R/O 6 Ext. Comprehensive SMART error log
0x06 SL R/O 1 SMART self-test log
0x07 GPL R/O 1 Extended self-test log
0x09 SL R/W 1 Selective self-test log
0x10 GPL R/O 1 NCQ Command Error log
0x11 GPL R/O 1 SATA Phy Event Counters log
0x80-0x9f GPL,SL R/W 16 Host vendor specific log
0xa0-0xa7 GPL,SL VS 16 Device vendor specific log
0xa8-0xb7 GPL,SL VS 1 Device vendor specific log
0xbd GPL,SL VS 1 Device vendor specific log
0xc0 GPL,SL VS 1 Device vendor specific log
0xc1 GPL VS 24 Device vendor specific log
0xe0 GPL,SL R/W 1 SCT Command/Status
0xe1 GPL,SL R/W 1 SCT Data Transfer
SMART Extended Comprehensive Error Log Version: 1 (6 sectors)
Device Error Count: 1269 (device log contains only the most recent 24 errors)
CR = Command Register
FEATR = Features Register
COUNT = Count (was: Sector Count) Register
LBA_48 = Upper bytes of LBA High/Mid/Low Registers ] ATA-8
LH = LBA High (was: Cylinder High) Register ] LBA
LM = LBA Mid (was: Cylinder Low) Register ] Register
LL = LBA Low (was: Sector Number) Register ]
DV = Device (was: Device/Head) Register
DC = Device Control Register
ER = Error register
ST = Status register
Powered_Up_Time is measured from power on, and printed as
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
SS=sec, and sss=millisec. It "wraps" after 49.710 days.
Error 1269 [20] occurred at disk power-on lifetime: 11972 hours (498 days + 20 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
40 -- 51 00 00 00 00 00 62 be 6b 40 00 Error: UNC at LBA = 0x0062be6b = 6471275
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
60 00 01 00 f0 00 00 00 62 be 6b 40 00 01:00:24.825 READ FPDMA QUEUED
60 00 01 00 e8 00 00 00 62 be 6a 40 00 01:00:24.824 READ FPDMA QUEUED
60 00 01 00 e0 00 00 00 62 be 69 40 00 01:00:24.824 READ FPDMA QUEUED
60 00 01 00 d8 00 00 00 62 be 68 40 00 01:00:24.824 READ FPDMA QUEUED
60 00 01 00 d0 00 00 00 62 be 67 40 00 01:00:24.823 READ FPDMA QUEUED
Error 1268 [19] occurred at disk power-on lifetime: 11972 hours (498 days + 20 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
40 -- 51 00 00 00 00 00 62 be 6b 40 00 Error: UNC at LBA = 0x0062be6b = 6471275
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
60 00 20 00 50 00 00 00 62 be 60 40 00 01:00:22.070 READ FPDMA QUEUED
61 00 08 00 48 00 00 03 1e 4b 28 40 00 01:00:22.069 WRITE FPDMA QUEUED
61 00 20 00 40 00 00 0a c4 98 20 40 00 01:00:22.068 WRITE FPDMA QUEUED
61 00 20 00 38 00 00 0a c6 e8 80 40 00 01:00:22.068 WRITE FPDMA QUEUED
61 00 18 00 30 00 00 01 15 31 30 40 00 01:00:22.067 WRITE FPDMA QUEUED
Error 1267 [18] occurred at disk power-on lifetime: 11966 hours (498 days + 14 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
40 -- 51 00 00 00 00 00 62 be 6b 40 00 Error: UNC at LBA = 0x0062be6b = 6471275
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
60 01 00 00 e8 00 00 00 62 be 00 40 00 00:56:28.306 READ FPDMA QUEUED
60 01 00 00 e0 00 00 02 cd ca 00 40 00 00:56:28.290 READ FPDMA QUEUED
60 00 02 00 d8 00 00 00 62 be ea 40 00 00:56:28.269 READ FPDMA QUEUED
2f 00 00 00 01 00 00 00 00 00 10 e0 00 00:56:28.268 READ LOG EXT
60 01 00 00 d0 00 00 00 62 be 00 40 00 00:56:25.826 READ FPDMA QUEUED
Error 1266 [17] occurred at disk power-on lifetime: 11966 hours (498 days + 14 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
40 -- 51 00 00 00 00 00 62 be 6b 40 00 Error: UNC at LBA = 0x0062be6b = 6471275
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
60 01 00 00 d0 00 00 00 62 be 00 40 00 00:56:25.826 READ FPDMA QUEUED
60 01 00 00 c8 00 00 01 f6 ae 00 40 00 00:56:25.815 READ FPDMA QUEUED
60 00 02 00 c0 00 00 00 62 be d6 40 00 00:56:25.794 READ FPDMA QUEUED
2f 00 00 00 01 00 00 00 00 00 10 e0 00 00:56:25.793 READ LOG EXT
60 01 00 00 b8 00 00 00 62 be 00 40 00 00:56:23.343 READ FPDMA QUEUED
Error 1265 [16] occurred at disk power-on lifetime: 11966 hours (498 days + 14 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
40 -- 51 00 00 00 00 00 62 be 6b 40 00 Error: UNC at LBA = 0x0062be6b = 6471275
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
60 01 00 00 b8 00 00 00 62 be 00 40 00 00:56:23.343 READ FPDMA QUEUED
60 01 00 00 b0 00 00 02 5e ed 00 40 00 00:56:23.328 READ FPDMA QUEUED
60 00 02 00 a8 00 00 00 62 be ce 40 00 00:56:23.308 READ FPDMA QUEUED
2f 00 00 00 01 00 00 00 00 00 10 e0 00 00:56:23.307 READ LOG EXT
60 01 00 00 a0 00 00 00 62 be 00 40 00 00:56:20.869 READ FPDMA QUEUED
Error 1264 [15] occurred at disk power-on lifetime: 11966 hours (498 days + 14 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
40 -- 51 00 00 00 00 00 62 be 6b 40 00 Error: UNC at LBA = 0x0062be6b = 6471275
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
60 01 00 00 a0 00 00 00 62 be 00 40 00 00:56:20.869 READ FPDMA QUEUED
60 01 00 00 98 00 00 00 21 db 00 40 00 00:56:20.864 READ FPDMA QUEUED
60 01 00 00 90 00 00 00 21 da 00 40 00 00:56:20.863 READ FPDMA QUEUED
60 01 00 00 88 00 00 00 21 d9 00 40 00 00:56:20.858 READ FPDMA QUEUED
60 01 00 00 80 00 00 00 21 d8 00 40 00 00:56:20.857 READ FPDMA QUEUED
Error 1263 [14] occurred at disk power-on lifetime: 11966 hours (498 days + 14 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
40 -- 51 00 00 00 00 00 62 be 6b 40 00 Error: UNC at LBA = 0x0062be6b = 6471275
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
60 01 00 00 50 00 00 00 62 be 00 40 00 00:56:18.379 READ FPDMA QUEUED
60 00 02 00 48 00 00 00 62 be a6 40 00 00:56:18.357 READ FPDMA QUEUED
2f 00 00 00 01 00 00 00 00 00 10 e0 00 00:56:18.356 READ LOG EXT
60 01 00 00 40 00 00 00 62 be 00 40 00 00:56:15.915 READ FPDMA QUEUED
60 00 02 00 38 00 00 00 62 be 9a 40 00 00:56:15.893 READ FPDMA QUEUED
Error 1262 [13] occurred at disk power-on lifetime: 11966 hours (498 days + 14 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
40 -- 51 00 00 00 00 00 62 be 6b 40 00 Error: UNC at LBA = 0x0062be6b = 6471275
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
60 01 00 00 40 00 00 00 62 be 00 40 00 00:56:15.915 READ FPDMA QUEUED
60 00 02 00 38 00 00 00 62 be 9a 40 00 00:56:15.893 READ FPDMA QUEUED
2f 00 00 00 01 00 00 00 00 00 10 e0 00 00:56:15.892 READ LOG EXT
60 01 00 00 30 00 00 00 62 be 00 40 00 00:56:13.462 READ FPDMA QUEUED
60 00 02 00 28 00 00 00 62 be 96 40 00 00:56:13.440 READ FPDMA QUEUED
SMART Extended Self-test Log Version: 1 (1 sectors)
Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
# 1 Short offline Completed without error 00% 11149 -
# 2 Short offline Completed without error 00% 11130 -
# 3 Short offline Completed without error 00% 11114 -
# 4 Short offline Completed without error 00% 11098 -
# 5 Extended offline Completed without error 00% 11087 -
# 6 Short offline Completed without error 00% 11077 -
# 7 Short offline Completed without error 00% 11073 -
# 8 Short offline Completed without error 00% 11064 -
# 9 Short offline Completed without error 00% 11051 -
#10 Short offline Completed without error 00% 11037 -
#11 Short offline Completed without error 00% 11020 -
#12 Short offline Completed without error 00% 11005 -
#13 Short offline Completed without error 00% 10988 -
#14 Short offline Completed without error 00% 10978 -
#15 Offline Interrupted (host reset) 00% 6458 -
#16 Short offline Completed without error 00% 6028 -
#17 Short offline Completed without error 00% 3880 -
#18 Short offline Completed without error 00% 3317 -
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
SCT Status Version: 3
SCT Version (vendor specific): 258 (0x0102)
Device State: Active (0)
Current Temperature: 51 Celsius
Power Cycle Min/Max Temperature: 31/55 Celsius
Lifetime Min/Max Temperature: 31/70 Celsius
Specified Max Operating Temperature: 36 Celsius
Under/Over Temperature Limit Count: 0/0
Vendor specific:
01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
SCT Temperature History Version: 2
Temperature Sampling Period: 1 minute
Temperature Logging Interval: 1 minute
Min/Max recommended Temperature: 0/60 Celsius
Min/Max Temperature Limit: -41/85 Celsius
Temperature History Size (Index): 128 (12)
SCT Error Recovery Control command not supported
Device Statistics (GP/SMART Log 0x04) not supported
Pending Defects log (GP Log 0x0c) not supported
SATA Phy Event Counters (GP Log 0x11)
ID Size Value Description
0x0001 2 0 Command failed due to ICRC error
0x0002 2 0 R_ERR response for data FIS
0x0003 2 0 R_ERR response for device-to-host data FIS
0x0004 2 0 R_ERR response for host-to-device data FIS
0x0005 2 0 R_ERR response for non-data FIS
0x0006 2 0 R_ERR response for device-to-host non-data FIS
0x0007 2 0 R_ERR response for host-to-device non-data FIS
0x000a 2 4 Device-to-host register FISes sent due to a COMRESET
0x000b 2 0 CRC errors within host-to-device FIS
0x8000 4 10644 Vendor specific
View Git Blame Copy Permalink